2017 Chrysler Pacifica 3.6L Spark Plugs and Coil on Packs 🦾🦾🦾

[@Realquickfix]

I just wanted to list the parts I used and helpful tools, I have an affiliate link or look it up anywhere. 1. Spark plugs NGK 96358 or amzn.to/3B37ugU 2. Ignition Coil Standard Motor UF807 amzn.to/3MKdBt0 3. Wobble set (Nothing Special) amzn.to/3XFuwTV 4. Ratchet (Budget but good) www.amazon.com/dp/B0CYMXT644/ref=cm_sw_r_as_gl_api_gl_i_3KPY0KKY9R3TH507Z816?linkCode=ml2&tag=amazonomar08-20

[@Mike_44]

The colored coded diagrams snd specifications really helped. Thanks for taking the time to make this video. Awesome work!

[@Realquickfix]

Glad I can help and thanks.

[@eliuttgonzalez2003]

​@@Realquickfix where can you get thosse colored diagrams for the chrysler pacifica ? You have a video where your troubleshooting the fuel system?

[@cuinican1980]

Agreed!!!

[@GunzNGearz]

4:30 ok thats how you unplug the coils on this. Believe it or not that was my only fear on this job.

[@GG-lp2ex]

Bro this is exactly what I needed ! 🙌🏼👍🏼💪🏼 thanks!

[@mikegoodwin2647]

Thanks for the video. Unfortunately, the camera angle shows nothing of the tough part, that being the right side of the plenum where bolts underneath are lurking. I would recommend trying to take care to show all those difficult tasks with a camera angle or coming back and showing where they are.

[@RealOmarWahdan]

Yes it was somewhat difficult to video. I did post the schematics. If you take care to remove the 3 nuts for the EGR valve and the 1 nut for the bracket, the rest should be matter of wiggling out.

[@adamtbrady]

Awesome vid tku

[@GroguDad]

Any vid8on how to do a valve cover gasket replacement? I have a 2018 i need to do asap

[@RealOmarWahdan]

You basically follow this and the valve cover should be accessible.

[@seatime674]

Did you use Champion 9417 Iridium Plugs I believe the book calls for that specificly

[@Realquickfix]

As much as I like to always keep everything OEM, I ended up putting in NGK.

[@rtcfpv1012]

Hi, can you please point out which one is cylinder #1. Thank you.

[@RealOmarWahdan]

Sorry for the delayed response cylinder one is the rear cylinder first one from the left.

[@rtcfpv1012]

@@RealOmarWahdan Thank you.

[@patrickb6938]

I can't figure out how to reconnect the EGR hose. In the video it looks like you remove the EGR all together, is that correct? The EGR hose is very rigid

[@Realquickfix]

Sorry for delay did you figure it out?

[@patrickb6938]

@@Realquickfix nope. I ended up disconnecting the EGR completely. I couldn't bend the hose enough to reconnect it

[@nostalgicgamer1363]

how many plugs will I need?

[@Realquickfix]

6

[@frecho213]

How much does a job like this will cost?

[@Realquickfix]

Your sentence is grammatically correct, but it could be refined for clarity and precision: "It depends on where you buy your parts and whether you have all the necessary tools. I bought all my parts from Rock Auto, and I believe I paid under $300."

[@Milfordbeach]

🔧👍

[@joegranillo7216]

did you change out the old coil packs to new ones under the plenum?

[@Realquickfix]

Yes.

[@davidharenza3862]

how the heck do ya get the spark plugs out in the back?

[@RealOmarWahdan]

You need a short extension and possibly a wobble which I had.

[@krkruse1]

This video is useless, you can’t see what screws and connectors to remove and their locations on the driver side!

[@cuinican1980]

You got issues homie, you need to be a grease monkey and not a girl to understand.

[@Realquickfix]

Sorry you feel that way. I try to do my best, but it was very difficult shot. That’s why I also included the diagram for better illustration.