2017 Dodge Challenger Strut Bar Install.

[@MtnBadger]

Id personally consider leaving that engine cover off, all it does is trap heat that you're trying to let out as best/fast as possible. It's just a "beauty" cover and the hood is usually closed (which is my point). Are there soft washers at the head of the bolt that prevents maring the paint on the bar when you tighten them down? If not, I'd consider them for two reasons... A, protecting the paint and B, adding a vibration absorber to reduce chsnces of the fasteners loosening. Just a question/my two cents worth. 😊 What do you have for the '22 Scat Pack, Shaker edition? This bar style won't work on a Shaker hood.

[@monty3927]

They all have 13mm. My 11 has 13mm. I think they are m8 threads

[@bretmarstellar603]

Probably should have had something down to catch the metal flakes and such from drilling out the strut brace mounting holes rather than letting them fall on the engine.

[@teamkhaosmotorsports3771]

Thank you will keep that in mind next time. Both Employees in video no longer work here

[@TowerTruck14]

Butchers

[@googleiscommunist2878]

Rumor has it he’s still tightening to this day.

[@nathanbrady5648]

-10 points for dropping metal shavings on the block

[@denniscass6347]

Yea thinking the same thing and no fender covers. Nice bar but I think that I would install it myself

[@RT_345]

“Oh, those metal shavings on the engine are fine” “Smoke from the drill bit is normal when you don’t use a lubricant like I did” “When cutting metal use your drill at high speed” 🤦🏻

[@wolf-bv6lg]

Why does your bar show $199, but when you put it in the cart it jumps to $574…

[@teamkhaosmotorsports3771]

That is because The Gloss Black version is 199 and the color matched ones are 574 because of the man hours and cost of auto grade paint and clear.

[@Chak-jr8td]

Does this strut bar fit the 3.6 engine as well?

[@jimmyc7540]

I guess 7 years later you still haven't got a replay this bar will fit the pettastar V6

[@teamkhaosmotorsports3771]

Yes it will fit but Engine cover will have to be modified

[@scatpackjohn392]

Hello this is a random question but after I install it should I get a front-end alignment

[@teamkhaosmotorsports3771]

no not needed

[@tomtardiff6918]

Why is it not engineered to sit a half inch away from firewall instead of attaching?

[@teamkhaosmotorsports3771]

This was how others in the industry had done it.

[@abramd3l167]

Do they fit a 2018 sxt 3.6??

[@teamkhaosmotorsports3771]

It will fit but you would have to modify or remove the plastic engine cover

[@speedracer9220]

Why dont you have one in white ?

[@teamkhaosmotorsports3771]

We offer every Charger and Challenger paint code! For white we have PW7 White Knuckle and PWD Ivory Tri-Coat. If you have any other questions, you can contact us at [e-mail]

[@mocacreamjr]

If my holes don’t line up, do I have to jack up the car on all fours or just the front?

[@teamkhaosmotorsports3771]

Just the front or the side that they are not lining up with. All you need to do is get the weight off of the tire so you can adjust the strut accordingly.

[@mocacreamjr]

@@teamkhaosmotorsports3771 ok thank you

[@tomtardiff6918]

Why do you attach to firwall at all?

[@lmjames33]

@@tomtardiff6918 Because that's what the instructions say to do. Hope that helps..