2017 hyundai elantra p0017

2017 hyundai elantra p0017 , timing gear failure

[@starcityrc3298]

It didn't break, The Dowl is pressed in the Sprocket. What happened is that is shimmy loose into the cam. It's a faulty design. It should actually not have back and forth play in the cam. Basically the hole for the cam was drilled too deep. Put a small spacer there and it will never happen again.

[@tsm2a]

Bro... I friggen love you for this... this engine code has stumped me for a while! cam sensor, crank sensor and timing chain all look good, but I had not went as far as taking the sprockets out... looks like I know what I'll be doing this weekend.

[@Angel-ft8bv]

Did you find a solution?

[@tsm2a]

Yes, what he discovered was my problem as well, new sprocket and camshaft, I tried to remove the broken pin from the camshaft, but no way, get oem parts, I tried an aftermarket sprocket and had to replace it AGAIN

[@wardogMMA]

Hello Brother, I have the same code on my 2019 Elantra 2.0, can you please help me by just explaining in details how can I fix it or get it fixed. Thank you for your time. Does changing Cam gears and timing chain fix it?

[@slayerrules70]

I just ran into this exact issue last week! New cam and phaser fixed it.

[@ShyamreddyKunta]

Is it working now

[@slayerrules70]

@@ShyamreddyKunta Yep

[@davidmadrigal1882]

Once you get to replacing the vvt sprocket on the exhaust, is there anything special to it or do you just bolt down the new one? Do I have to bolt the sprocket down and turn it to lock it or just torque down?

[@btc1340]

No special tool, just hold the camshaft with a wrench as shown in this video at 26:50 kzbin.info/www/bejne/hmbQhYusmbN9eac

[@castillocentralautomotrizo8799]

Hey what up broth I got same issue now already replaced both cam and crank but code came back after 30 minutes most likely when you try to start vehicule couple time thanks for the inf I’ll do it now may works .

[@srt-4i8acorn34]

i got the same issue now on a 2017 gonna tear it down tomorrow i think it jumped time but it has like 60k miles on it so its strange

[@parksidegarage9437]

Castillo did u place the chain and guides too?

[@davidk9478]

I have Hyundai Atlanta 2017 I have code p0017 p2297 I know first one but what about second one

[@nickhigh2127]

So I am having this code show now. Same year 2017 with 68K mileage. Would you recommend taking it back to get it fixed and then sell?

[@parksidegarage9437]

Fix it car still has low miles

[@srt-4i8acorn34]

did it damage the valves or anything? any info would be helofull thanks

[@parksidegarage9437]

Valve was not damage on this one

[@stevenfoust3782]

Did the engine run normally under power with just a rough idle or did it have a lose of power.

[@parksidegarage9437]

Loss power , hard start

[@tsm2a]

Hard start, rough idle

[@reptilectriko2a]

How did you remove the timing cover??

[@tsm2a]

There are videos on this…. Pretty involved

[@elmersimon1175]

Hi sir how did u pull that guide??

[@parksidegarage9437]

Was not able to extract it end up replacing the cam

[@nicholasmarkie1860]

I use a left hand thread drill bit and extractor. never had to replace the cam

[@SirOskerLowkeyy]

Did you remove the broken dowel or replace the camshaft

[@parksidegarage9437]

Wasn’t able to extract broken dowel so i replace the cam

[@LordDirus007]

Should be able to drill a small hold and put a screw in it and extract it

[@LuisChavez-tl9us]

@@LordDirus007 the pin is stainless steel you can't drill it out i tried unless you take it to a machine shop

[@tsm2a]

Yeah, I tried for hours to remove the broken guide, you’ll booger up the hole trying, just order a cam, couple hundred bucks