2017 M109R Headlight replacement from Revo Cycles! I'm impressed! Super bright and a direct fitment!

Check out these links for more content, merch, and the latest updates!
Link to headlight- www.revo-cycle...
Facebook= / motoeshllc
Instagram= / motoesh

[@mcmmcm9344]

Thank you so much.. i watched the video twice got it done on my 2020 m109r boss. This video works for 2020 model as well. Came out awesome. Revo shipped the product quick actually.. got it in week. Definitely saved me some money. God bless you

[@MotoEsh]

MCM MCM good to hear! Which color scheme is your 2020? And congrats on the bike

[@mcmmcm9344]

@@MotoEsh white and copper

[@actionjoejackson9880]

Great video I’m working on bolt on mods this winter on my 2019 m109r thanks

[@MotoEsh]

Same here! Winter is the perfect time. And the cool part is, parts are pretty much all the same from 2006 on. Makes for finding some good deals on used stuff. Have fun!

[@charliesmith9528]

Just added a batwing to my 07 m109.Finally got it all figure dout but getting the healdight cowling back on has been a bitch,,seems the cowling doesent want to back far enought so screw holes match up..any suggestions or tricks,,the plastic shield from factory thathas two screw holes in top seems to be getting in way,,

[@TheSuave230]

Nice. Where did you find the replacement push pins?

[@ossieyelder9108]

Great video but you should've shown how you hooked up the red wire because I had to splice it into the wire harness from the headlight, not the bike.

[@TheSuave230]

How did you splice it in?

[@projektxent]

I am digging the flush front turn signals. Where did you get them?

[@MotoEsh]

Carlos Butler Raw Design Cycles

[@Jeffro115]

Great vid! Well detailed! What is the PIAA sticker that I see? Is that part of the Revo light kit?

[@MotoEsh]

No this customer PIAA lights on each side down at the calipers. Actually pretty cool and help a lot at night

[@leoalvarez5535]

Great video, I'm going to buy that headlight... But where you bought and how is the installation of those turn signals??? Thanks

[@MotoEsh]

Leonar Alvarez the turn signals are from Raw Design Cycles, and I have a video explains how to install them.

[@huckyjung]

Hi Sir, what kind of batwing is that? do you have a web link? Thanks a lot

[@MotoEsh]

Hucky Jung www.meancycles.com/store/parts/view.cfm?PartID=228276

[@huckyjung]

@@MotoEsh thaaaaanks 🤘

[@gorillagems7845]

How did you arlttach the loose red wire. I have the headlight and have no idea where it goes

[@MotoEsh]

Rob passmoor so I took some of the extra white wire they send along and hooked the red wire to the green wire down at the turn signals. The red wire to any constant 12v will do the trick.

[@gorillagems7845]

@@MotoEsh thanks for getting back to me. I'll give it a go. Also watched your video on the instalation of the flatz as I'm fitting those too 👌🏼

[@MotoEsh]

Rob passmoor sweet! Yeah that’s good be of the cleanest looking combos yet, that headlight with flatz. Be sure and post pics up on fb.

[@gorillagems7845]

@@MotoEsh will do. Just working out how to connect the red wire to the orange on the geadlight so the halo stays on. I'm new to all this stuff haha

[@MotoEsh]

Rob passmoor no worries, I’m sure you will get it figured out. We all start somewhere

[@ashetnaya]

Where did you get your signals from?

[@MotoEsh]

Mean Cycles in Florida

[@Driverstein]

How can the low beam be adjusted?

[@MotoEsh]

DriverStein actually not sure it can be. Haven’t had to try it

[@viliamvacula8111]

Is this legal in EU? I don't want to have to put in the original headlight every 2 years for the mandatory tech inspection.

[@MotoEsh]

Viliam Vacula Not sure, I would think so as it has the high/low beam and is brighter

[@zabosandrea162]

If , light has an E-mark on them it means it has been approved somewhere in the EU as compliant with the European regulations. In some countries E-marking might be required for the 1st registration test.

[@viliamvacula8111]

@@zabosandrea162 does it have the E-mark?

[@zabosandrea162]

@@viliamvacula8111 , www.revo-cycles.com/shop/m109rick-m1800r-vzr1800/ (ON THE WEB SITE don't say they have,you must ask) or you can buy in EUROPE from Denmark with E-MARKING www.fullblast.dk/suzuki-eng

[@cswann0821]

Any forseen issue with having the halo always on... splitting the red wire to both low and high beam wires?

[@durandehari8681]

Does it fit on a intruder m800 2011?.. hope you see this.

[@MotoEsh]

Duran Dehari this style light will fit any M109R From 2006 to present.

[@durandehari8681]

@@MotoEsh thanks for the feedback. My actual question was does it fit on a m50 boulevard from 2011?

[@MotoEsh]

Duran Dehari no I don’t believe so, as the M50 has a smaller bucket if I’m not mistaken.

[@victorinho1995]

I have the same question, there are many headlights like this on aliexpress but I don't know if it fits on the m50 model.

[@drewbear187]

Hey how much you charge i live in maryland

[@MotoEsh]

Andrew Lessane labor rate is 75$ an hour