2018 Streetglide Vindikta Hoopteeze (1st Mtotovlog)

[@chrisvantassel8867]

I ordered these in 14" which was a guess, glad to see they look like the perfect size.

[@adamakins9748]

I'm purchasing a 2014 street glide special with 7788 miles on it this is the first upgrade i'm doing I currently ride an 03 lowrider with drag bars 27" wide , after research these are the narrowest bars for a street glide. I'm going with the 12" cause i'm only 5'5" Thanks for the honest review sealed my thoughts

[@aloveg1072]

How did you like the 12's? I'm only 5'2 but want something comfortable

[@a.c.airbrush5543]

@@aloveg1072 the hoope teeze 12's are more like everyone else's 10's I'm 5' 5" so these with the HD reach seat are perfect

[@aloveg1072]

@@a.c.airbrush5543 cool I'm only 5'2 like I said and I already have the reach seat so I'm pretty sure these are going to work for me and I still have touch access to my touch screen

[@206-HoneyBadger]

Awesome video on these bars! I also like that you informed us about width difference compared to your other bars. And I like the other video where you pointed on a possible fitment issue.

[@vindikta]

Nice job on the video, Good honest review, glad that you like the bars.

[@toyrock16]

Is it the just where the camera is mounted or do the bars block a portion of the outer two gauges?

[@ronsportin]

No, the bars actually do block a portion of the outer two gauges. You can’t see your turn signals straight on as well as if your tank is full. If you move your head a little you can see.

[@toyrock16]

@@ronsportin thanks. I like the idea behind these bars but I guess I’ll have to wait until I see a Street Glide with them to make up my mind.

[@ellissmithjr6599]

This is Awesome👍😎🇺🇸 Been trying to decide what bars for a number of weeks and finally decided on these,watched your vdeo twice that made my mind up. Do you have the air suspension only on the rear tire?

[@ronsportin]

When I shot the video I had air on the rear only, but now I have front and rear air.

[@ellissmithjr6599]

@@ronsportin I will do the same...5'3" barefeet 😳😝😎

[@jasenhaynes8046]

I need those bars. I love your style man. Great vid

[@jacobhanley197]

How long did it take for you to receive yours I've been waiting on mine for about 6 weeks

[@ronsportin]

It took about two months, but I ordered them as soon as they came out. I do believe that’s there lead time though.

[@SionSanders_1775]

What’s up bruh? You stated that you’re 5’6” and your bars are 14’s? How much pull back do you have with these?

[@ronsportin]

5” for the pull back. You have some adjustability on the angle which you mount them.

[@edwinparedesnjusa]

What size bar you got?

[@chrissmith2492]

Did u have to get a different clamp for the bars or was u able to use the stock clamp, I know when I did apes on my fb I had to change the clamp on it.

[@ronsportin]

I re-used the stock clamp.

[@chrissmith2492]

@@ronsportin ok thnx, no issues i'm guessing, it stays in place, no moving about? How many miles have u put on these bars?

[@ronsportin]

@@chrissmith2492 I have about a 1000 miles on them. They stay in place. You might have to adjust after you put them on ride to get the angle right. The only thing I’m still working with is the valance for the ignition switch. The bars are fat and it’s tight fit down there getting back on

[@chrissmith2492]

@@ronsportin so what exactly is the problem you're having? would u be able to do a video on it? thnx for all the info on these, i have been considering these exact bars

[@ronsportin]

@@chrissmith2492 I’ll see if I can shoot a quick video tomorrow.

[@joesbuell]

Can you still see the fuel and amps gauges?

[@ronsportin]

Only a portion of them straight on. You’d have to lean your head a little to see the full gauge.

[@joesbuell]

@@ronsportin does it bother you? It's the only thing that bugs me about them to hesitate getting them.

[@ronsportin]

@@joesbuell at first I was bothered about not seeing my turn signals but I adjusted to it. It’s second nature to lean a little bit to see if they are on. As far as the fuel I just look at the trip meter to check my fuel levels. I honestly like them. I like how narrow they are. Makes me feel like I have more control of the bike, if that makes sense.

[@facionbruno]

Just stumbled into your channel thanks, I’m an aggressive rider had a Hayabusa for ten years, have a 2017 ultra classic. I have 13 inch apes love them but I’m limited with my riding style. My question did you change your cables. I have stock and longer ones on the bike now. Just wondering. Man they look nice. Thanks keep me posted🙏🇵🇷🥊

[@ronsportin]

My bike originally came with 13” apes and so it had longer cables and the wiring extension. Those worked with the Hoopteez bars, just not a lot of excess.

[@facionbruno]

@@ronsportin thank🙏🇵🇷🥊

[@danswanson5601]

Hey! Nice job on the video. My question is... did you use the original clutch and brake lines?

[@ronsportin]

Yes. The originals were used.

[@tim_buk_u7554]

Hey man, trying to get hold of ya but keep running into road blocks. I need to get you my info for those bars. Any suggestions?

[@ronsportin]

Instagram under @ronsportin

[@jasonweisberger6741]

How was doing the internal wiring and any tip on get the wire feed threw

[@24sevvin]

Do they have the holes in them for the locator tabs on the control housing?

[@ronsportin]

Yes

[@24sevvin]

@@ronsportin perfect. Thanks for the response!

[@tealroadie]

What's up brother, question, my installer is stating that I will need extended brake and clutch cable. Did you have to put on extended cables? I have a 19 SGS and I purchased 14's as well

[@ronsportin]

Yeah you will have to purchase extenders. When I purchased my bike it already had the extenders because it came with 13” apes on it.

[@tealroadie]

ronsportin thanks i already threw them on. Was able to install without extended cables.

[@andrewjambor3850]

Did you have to change out all your cables?

[@ronsportin]

Andrew Jambor I didn’t have to change out my cables because my bike came with 13” apes on it when I purchased. You would need to swap out if you have stock length bars.

[@pigasus1utube]

Question for you...hand position looks nice for aggressive riding with comfort. Pretty severe bend and was wondering how difficult was it to pull the wiring through / around that bend? T.I.A.

[@ronsportin]

pigasus1utube It was a little difficult but manageable. I ended up up cutting and then soldering the wires back once I got them through the bars.

[@pigasus1utube]

could it be solved with wire extensions?

[@ronsportin]

pigasus1utube I have wire extensions. It just was so tight on the TBW side with the amount of wires that had to go through. It was just easier for me to cut then solder the wires

[@pigasus1utube]

@@ronsportin Thanks again for taking the time to respond...guess if I want the bars, I'm gonna have to deal with the wiring. Respect.

[@nickmesik3541]

It’s been a year Ya still like the bars

[@ronsportin]

I actually swapped them out. I really liked them but was having shoulder issues so I went with a shorter set of bars.

[@adamakins9748]

Got my 12"s wired and will be installed tomorrow

[@dre92redbull92]

Are your arms level with the 14's?

[@ronsportin]

Dre92 redbull Yes my arms are level. Very comfortable riding position

[@MichaelHoward-td9qm]

Those look slick AF bub!

[@nobodysreview6137]

Nice, def like a T Bar

[@Cali000Hustle]

Very nice bro 👍🏽

[@DrivenWolf]

Different but nice