2019-2020 RAM 1500 Husky Custom Molded Front & Rear Mud Guards Review & Install

[@AmericanTrucksRam]

Shop these Husky Molded Mud Guards: amtrucks.at/2Fv7VQZ Subscribe for Weekly RAM Truck Videos: bit.ly/2G7fgWv

[@Corbrwl]

Just put them on my 2020 Rebel, fitment is great. Sticky tape doesn't really do anything so I did the "optional" additional screw on the front which required drilling a hole in the plastic, no problem. Back flaps were secure enough without the optional screw, front flaps were a bit floppy without the optional screw.

[@rejeanpaquet4375]

I just installed mine on my 2020 RAM 1500 Laramie, I was able to add the tape with the optional screw to the front, btw turn your wheels all the way, this makes it easier to install. As for the rear, I was not able to use the tape or the optional screw, there was nothing to secure it to. Looks like my rear fenders do not have liner covering the insdie front, strange, is this an option? Overall I like the product, look nice and OEM, easy to install, recommended.

[@mdtaranto]

I feel you should have went over how difficult it was to install the optional screw in the rear. Because you can't turn the tires like you can in the front, I drilled the hole in the mudflap first, then mounted the tape, and mounted the mudflap itself. Once installed, you have to get in there at a funny angle in order to drill a hole into the liner. It's a very awkward angle, but it's doable. The optional screw definitely helps keep the mudflap in place at highway speeds. In a different truck, without the optional screw, the mudflap would vibrate a bit and you could hear it in the truck. Better safe than sorry.

[@ryanbrazeau6059]

How is it difficult? Remove the rear tire…

[@mdtaranto]

@@ryanbrazeau6059 ah, must have missed that part in the video. Wait…

[@ryanbrazeau6059]

@@mdtaranto 🤡

[@jeffshultz3883]

And if ya have fender moulding you can skip the plastic film.

[@haraldboeck3294]

Is there a difference in installation if wheel liners are present?

[@nabatron21]

Whats the sizing of the tires, wheels and offset? Any trimming or rubbing?

[@JALEO1970]

Do the splash guards adequately drain mud or will it collect inside the guards like the Mopar guards.

[@keithsuma3298]

An unrelated question… What size tires are those?

[@bull5919]

confused if the mud flap is screwed to the original flap then the frame with factory screws its no need to drill another hole

[@aristeidis8226]

Bull if not mistaken the all the original screws are on one side, and the option screw is on the other side if your not comfortable with the 3m tape.

[@ninolama]

Awesome

[@AmericanTrucksRam]

Thanks for watching! -Zach

[@polpowermetoo4531]

They fill up with water, dirt and mud. Then they freeze and split.. They aren't worth a crap.

[@vojnikjna30]

Do they.

[@rl2769]

I can see that. I just got mine. And not impressed with the fit.

[@THKR-jw4ot]

👍👍👍👍

[@co19391]

Thanks.. I used this video to take mine off 🥴

[@AmericanTrucksRam]

Thanks for watching! -Zach