2019 -2021 CHEVY SILVERADO / GMC SIERRA AMP AND SUB INSTALL - NON BOSE

[@Nick-xv7xx]

One of my friends got a 2021 duramax without the bose system and is wanting to install a JL 10, this video answered ALL of my questions, great video

[@timothywilliams4699]

was his duramax ran on the same side as this video? i have the 2020 duramax, and wanted to make sure it was ran down the driver side?

[@joanben1977]

Thank God I came across this video. Just got a 22 2500hd (no bose)and the systems ok. It's gonna be better now. Great videos throughout your channel. 10 👍🏻

[@edwarda7832]

Did you get yours done?

[@bigSILVA77]

Hey joanben. I have the same year. And non Bose. What colors wires r we looking for

[@dreroy599]

@@bigSILVA77did you get it figured out

[@rynosrage1497]

Video helped me install an amp and a single custom box 12. Much appreciated!!

[@rynosrage1497]

I ran the power on the passenger side however. Everything else was spot on to what y'all did.

[@rickharris8780]

@@rynosrage1497 did you find the nipple thing to cut off and slide it through with soap to get through the firewall on that side. that took me forever.

[@rynosrage1497]

No soap. Cut it went through kinda easy but took about 10 minutes. Finally got it though.

[@rickharris8780]

@@rynosrage1497 My fat fingers couldnt get it. I am also only 5'7" and have a leveling kit on my truck. I literally had to use an A frame ladder. LOL! Finally just got the dawn off the sink and slid on through. Wiped it all off good and kept moving. I am waiting on my amp in the mail. I cant wait!! Dual 12s in my 21 Silverado. 350wRMS x2 @2ohms. Not super loud but will do just fine for my tastes. Down firing box cut for under the rear crew cab seat. Have to go to Home Depot and get some Female Spade connectors for the remote line tomorrow. Didnt come with them on my kit I bought. There was a seat bolt i just undid and used a drill wire brush went down to metal bolted her down and used a little rusoleum black around it afterwards.

[@rynosrage1497]

@rickharris8780 glad you're getting it done. My 12 does just fine. Loving it. Hope you enjoy it once it's done.

[@max22131]

For the 2019 gmc sierra 1500 non bose the wires you need on the passenger side are blue and white braided together

[@Juli-n-David]

Thank you

[@ethaneisen3694]

Quick question? My loc has more than just blue and white wires on it? Do I only connect the blue and white wires on my loc to the blue and white braided wires

[@Mike_Gs]

what is the ground and positive wire

[@johnrude2230]

Put both negatives together and both the plan colored together. You will not use the brown as those are ground wires. Then attach to the 1 negative wire in the harness and the 1 positive wire on the harness.

[@barteremperor211]

Which one’s positive and which one’s negative?

[@jeremej1]

Where did u get that sub box….I didn’t see that one in ur description

[@williamsfrenchiesandbullies]

BEST VIDEO YET THANK YOU MAN MUCH NEEDED

[@logandarby5242]

Appreciate the video. I tapped the rear passenger on my 2022 LT trail boss. The wire loom on the passenger foot well the wire colors for me were blue with black and a white wire. the pac loc you use is so simple and works great.. Thanks keep up the great work

[@asuhadude4817]

You don't happen to have a video of the wiring you did for the passenger side.I can't seem to find one of people wiring to the passenger side.

[@kevindeleon5062]

Which one is positive and negative? @logan Darby

[@jamiekilbury7346]

​@@kevindeleon5062 positive has line... negative doesn't bite solid color

[@TommyTrentonJr]

is that a groud shaker box?!

[@healy7103]

box stays there alright nothing to mount it down? or would it slide around

[@johnnyninetytwo]

Should you run your power on the opposite side of the LOC wires ?

[@octanetvchannel]

If you are running a sub amp you don't have to

[@justinsamborski2610]

So how do you connect the line output converter wires to the Tapin spot ?

[@rickharris8780]

My fat fingers couldnt get it. I am also only 5'7" and have a leveling kit on my truck. I literally had to use an A frame ladder. LOL! Finally just got the dawn off the sink and slid on through. Wiped it all off good and kept moving. I am waiting on my amp in the mail. I cant wait!! Dual 12s in my 21 Silverado. 350wRMS x2 @2ohms. Not super loud but will do just fine for my tastes. Down firing box cut for under the rear crew cab seat. Have to go to Home Depot and get some Female Spade connectors for the remote line tomorrow. Didnt come with them on my kit I bought. There was a seat bolt i just undid and used a drill wire brush went down to metal bolted her down and used a little rusoleum black around it afterwards.

[@MattChat56]

If you have the Bose, do you still need the line output inverter?

[@octanetvchannel]

Yes

[@mikepoint4717]

Great install , my 2021 Chevy 1500 Custom did not come with the Bose speakers, I did notice before I had my 5 channel 1200 watt amp and 10 inch installed, my factory stereo would drop it’s signal? The installation company mentioned this is a common issue with GM stereos? My wife’s car is ok but my daughter’s car does it once in a while. How can I fix this ? . Cheers 🇨🇦

[@GabrielDiRocco-g1g]

witch is the negative and positive on the green wires

[@BruceHamman]

What size of T taps do I need?

[@octanetvchannel]

@@BruceHamman black or red color

[@hustlerkc11]

Not sure if you'll see this but I was wondering how this truck sounded with aa stockk non bose system when adding 2 10's. Do u feel that the speakers needed to be upgraded as well or?

[@octanetvchannel]

It sounds good but just depending on how loud you like your music. I love my music loud with the windows down so I would definitely upgrade my speakers if it was my vehicle. Some people would probably be more than happy with what this is without upgraded speakers.

[@hustlerkc11]

@@octanetvchannel yeah I kinda had a feelin the subs might have been too much for the speakers if turned up too much. I have the same truck just a sierra and I think I finally found out today that it's not a bose system but dealer could not tell me if there is an amp or not.. did that system in this truck have a factory amp or is the head unit the amp and if so do u ha e any idea what the watts per channel are? Thanks in advance.

[@shaunwilson9120]

I have a 2020 Chevy Silvarado non Bose and I’m into it right now mid install. What colors are the wires for the passenger side? Please help

[@coreymagin]

Anyone have info on this?

[@CGreen317]

For a 2023 no nose are the wire colors the same for the RCA converter?

[@octanetvchannel]

They would be different we have many other videos on non Bose on our channel

[@CGreen317]

@@octanetvchannelDoes it just have to be a positive and negative for the same speaker? And does it matter which one I do?

[@LuisEspinoza.]

What wires are those green wires are they speaker wires your tapping into? I’m currently working on mine but I’m running it passenger side

[@davidrayman3576]

The speaker wires they are on the driver side

[@raymarmolejo4565]

What did you use and do to keep the power wire from the battery up against the firewall

[@anthonylemus9400]

What color wires would I tap into if I wanted to put output converter on my passenger side?

[@octanetvchannel]

We are not sure on that we typically just do it on the passenger side

[@cjrichardson7718]

Did you figure the Color out?

[@MattChat56]

What Audio Dynamic subs did you go with? Looking to go with ad2510’s in my Silverado and wondering if the AD600.1 is enough amp.

[@brinleynicholson4588]

Connecting to the 2 green wires wont that only give you 1 side of the left and right channels?

[@octanetvchannel]

It is a mono signal going into a sub amplifier. If you're connecting a highs amplifier you will definitely want to use both left and right speakers

[@brinleynicholson4588]

@@octanetvchannel no it is not a mono signal if you are connecting to the left rear speaker. You need both left and right input for a true mono signal.

[@meshowutube]

Nice vid! Question for you. I have a 2021 Silverado RST Diesel (Non-Bose) I'm looking for the cross braided GREEN & GREEN+BLACK stripe to connect the SNI-35. I only have braided BROWN & BROWN + BLACK stripe. Have you noticed other colors for the high & low on 2021 Silverado's ??? Thanks !

[@INeverApologize]

I have a 2020 3.0. We're you able to confirm the right color word to tap into??

[@anthonygill4173]

Question: that box would you be able to flip it up and have the subs facing the bottom of the seat or not enough room if someone wanted it that way?

[@tmiller3342]

That’s the type of box I’m looking for. Right now I have four 8’s facing the back of the two front seats that don’t hit as hard as the 10’s would hit.

[@LisaRichardHyde]

Great video will send my custom single mtx 10" set up with emergency kit box all as one.

[@bc861]

So could I just use the SNI-35 for a 2022 Chevy LT. No Bose??

[@octanetvchannel]

Yes

[@Juli-n-David]

Love the video simple an basic and straight forward , some might not be as simple but still good information thank you keep up the great work

[@Deadlywiththeshine]

Nice helped a lot & Do we leave the brown wire out or does it connect to something

[@michaeleubanks6471]

Good video. I have a 2021 Silverado Trailboss Custom. Which wires do I tap into for the SNI-35?

[@KO-rh2hw]

Hooked everything up and no signal. SNI-35 hooked up to blue/black and white on right side (rear woofer signal wire). Verified power in/out sub, signal seems to be the issue. Cannot figure this out.

[@octanetvchannel]

You could possibly have a bad SNI-35 If not I would buy an RCA to headphone adapter. Plug the RCA side into the amplifier and then plug the headphone into a phone and play music through it and see if that works

[@BassheadDemo]

Is it the same for the 2023 Chevy Tahoe

[@Reed-vb3if]

Is this the same process for adding just a single sub?

[@jasonflores6135]

Great video one question did you use 2 ohm or 4 ohm speakers

[@octanetvchannel]

It would really depend on which amp that you run

[@BMBeatsProductions]

Would you know what wires for the 2024 non bose?

[@drumdoug8083]

Silly question, but since you are using a PAC line convertor and that is a non-BOSE system, why not use a PAC LPHGM71 T-Harness for the speaker leads, remote wire and power for the line convertor? You can do everything on the passenger side of the truck and you don't have to tap any of the factory wires or the fusebox. The harness takes care of that for you. Not trying to be critical, just curious.

[@dylanbushre2681]

So do you run it to the back of the head unit?

[@drumdoug8083]

@dylanbushre2681 No. It's a speaker breakout harness. It tees into the module on the passenger side kick panel.

[@christinasanchez577]

Detailed video!! I have a 2022 silverado custom. Non-bose. Did you run into issues with the active noise cancelation? I have what looks like mic covers in my headliner, but I think there is nothing behind them. Thanks for the help!!

[@RidelowTV]

What color wires did you tap into?

[@johnrude2230]

What is the diameter to the speaker wire in the harness?

[@nathanielwelch8556]

I have 12s what style box I need

[@jaymiranda1966]

Phenomenal walk through, thank you so much.

[@danielperez-rh8ze]

Thanks for the easy set up. Good video. 2020 Chevy custom

[@chrisweckesser3778]

did you use all of these units? SNI-35 PAC, SNI-15, SNI-50A. I ordered the SNI-35 to hook up only running a comp 10 inch kicker. do I need to add the following to get proper bass

[@octanetvchannel]

Those are all options you just need one

[@chrisweckesser3778]

@@octanetvchannel I hooked up the SNI-35 PAC to driver side per video but I am receiving a lower output on my door speakers any suggestions?

[@octanetvchannel]

@@chrisweckesser3778 I am not sure what you mean?

[@209Stretch]

My 2024 Silverado 1500 non Bose doesn’t have the Lug on the passenger side fuse panel for the remote wire. Is it possible it could be located elsewhere?

[@adamlopez3029]

Did you remove radio at all?

[@hustlerkc11]

What speaker is the gr/gr-blk, and do u know if that specific speaker has the signal that the high inputs need... bass signal?

[@josephgehen7400]

My fuse box is not the same,got a 2019 GMC ,,where can I hook up remote wire?

[@johnsutherlin497]

Did you only tap into the left rear speaker wires?? Did you tap or connect another converter on the right side for the right rear speakers?? PLEASE RESPOND I AM FRUSTRATED AS HELL

[@octanetvchannel]

You only have to tap into one speaker it is a mono signal. You will need to connect both negatives on the LOC together. Then you will connect both of the positives together and connect the positive side of the LoC into the positive of the speaker lead. Then connect both negatives into the negative lead of the speaker. If you get it mixed up it won't matter because it's a mono signal. I also have multiple videos on how to hook up an LOC on our channel

[@Cesarvargas27]

Hi why May amp. Get very hot under the seat Same place where you install it ? Is any specific amp ?

[@octanetvchannel]

It probably depends on the amplifier the one that we use is class d. It's very efficient. I would definitely check your voltage going into the amplifier and make sure that it's staying above 12.5. it could be a bad ground or not enough gauge of power wire

[@Chucktown84]

What size Amp is that?

[@ACMO5020]

What’s the difference between all the sni and how do I know which one I need I have a non Bose truck

[@octanetvchannel]

Any of the line output converters will work it's just different grades and more power

[@jordanjones8006]

When you hooked up the remote wire to the fuse block on the passenger side, did you use an inline fuse, or is there not a need for one?

[@octanetvchannel]

No need

[@jordanjones8006]

@@octanetvchannel thank you for the help and quick response.

[@ZacheryThompson-hc2zr]

I do not have the tooth to hook into, did you move the 50a fuse at all?

[@kyobana]

What do you call the connector you connect the remote wire onto passenger side fuse box?

[@octanetvchannel]

Typically it's a female quit connect plug. Mainly they use them for speakers or other things similar. You could probably even use like female speaker terminal connection or connector

[@ohjay7962]

Does this install Void the warranty?

[@octanetvchannel]

It should not it's fully reversible

[@ohjay7962]

Thanks..

[@tnshoesgang9879]

Does it void the warranty by putting subs in a new truck?

[@162mikey]

If you happen to have electrical issues I'm sure the dealer will point straight to the system

[@TuckerWiltrout]

Where did u run the ground wire ?

[@octanetvchannel]

Typically we will go underneath the seat to a bolt

[@brandondeluna4871]

Question: where did you hide the converter (pac) ?

[@octanetvchannel]

In the kickpanel on Bose and b pillar on non bose

[@dudeasf4211]

How much do you charge for this install I got the same truck and to lazy to do it my self

[@octanetvchannel]

Shoot us an email [e-mail]

[@brayanalonso6975]

question my friend installed a custom center console with a big sundown and i was wondering if you needed two batteries to have it so the truck wouldn’t die?

[@jamiekilbury7346]

I appreciate the video...helped me install my 2 12s under the rear seat and amp in my new 22 Silverado custom non Bose...after hooking up it sounds amazing...but question now the highs are not high enough so if I wanna run another amp for my highs would I have to run another sni-35 for highs amp and then another power,remote,and ground for new amp or can I jump off the original amp like old school

[@jamiekilbury7346]

In the Silverado custom cause I have the 2.7 turbo not V8... it's a different setup under the hood...i did use the drive side yellow wires to hook up the PAC and rim the rca wires...but i decided to run the power wire threw the firewall rubber grommet behind the battery on the passenger side it gave me more power wire...I also removed the the floor jack under the seat and used the bolt and screw that was used to hold the factory jack down for the ground and hid it under the carpet...I have a double cab...I used the ground shacker box made very well with 2-12" hifonics subs... pioneer d9601 mono 2400 amp...sni-35...and soundbox eck4 4 gauge wiring kit made with good quality wires...sounds amazing and wasn't what I was expecting it to sound like...been in the car audio world for 20+ years

[@keithervin2348]

@jamie kilbury I have the same truck can you possibly give a step by step? I have 2 10" kickers, pac 35 and a decent sub wiring kit to hook it up. Ok I know I have to run the power from the battery, this video says green wire on the driver side. Should I tap into the yellow? Also is it the same fuse as the one in the video to run the power wire too? Where do the remote wire go?

[@jamiekilbury7346]

@@keithervin2348I did almost everything the same as the video...the remote goes to the tab in the passenger side fuse box...I ran my power wire on the passenger side behind the battery threw the fire wall there is a black rubber grommet with other wires going threw it,it's kinda a pain to reach up under the dash to get it but use a flash light and take your time...I hooked the pac up on the driver side i believe its green or yellow wire cant remember but its the only two wires that are branded/twisted together tap into that...then run your rca wires...I removed the jack from under the rear seat...I used one of the post for my ground...I have two 12s in a ground shacker box,2400 pioneer champion amp...I plan to add another amp for my highs

[@darksky2758]

@@jamiekilbury7346 not sure if you will see this but , just wondering the 2 green/yellows I’m assuming they are slightly different how do you know which is which ? Ty

[@nathanielwelch8556]

Where can I find the box and what brand amp best for 12s

[@socallx1546]

Do you have a video on how to add an amp for your mids and highs?

[@octanetvchannel]

Not yet but we'll have one coming out soon

[@rmunoz360]

Anyone know if its any different for the new dash style? I know remote cable will but not sure on the speaker wires to tap into.

[@octanetvchannel]

Depends on what system you have but we have other videos on brand new 2022 and 2023. Just look through our videos under Silverado installs

[@daltonrachal5577]

I hooked everything up like yall did so I thought but I'm not getting any sound from my amp

[@octanetvchannel]

Does yours have Bose or premium sound?

[@ajflores84]

Will this box fit the 22’ Silverado crew cab?

[@davidrayman3576]

Why are you running the power down the driver side? Could it possibly cause interference with the sound? and just curious why did y’all run through the driver side with the power and not use the accessory port on the passenger side? I have the 2021 RST duramax and will install my in the morning I am going to use the kisloc2 from kicker in hopes I don’t have to run the remote wire from the fuse but I do like this build I’m going with kicker 10 l7t with a 1200.1 kicker amp so I hope it’s not over kill lol Great video guys

[@octanetvchannel]

No we usually run them down the driver side on all Silverados but this one is probably going to be easier to run down the passenger side. We've done a few since then and we started doing them down the passenger side. Either way is fine you can run it on the driver side or the passenger side

[@davidrayman3576]

@@octanetvchannel awesome I was just curious if it was an easier route because there seems to be a lot of space on the passenger side of that engine bay My truck is gonna be tight the engine bay if full of wires and the turbo is right in the way

[@davidrayman3576]

Thanks for such a quick reply too lol

[@primitiveoffroad480]

I thought the Silverado had a Kicker plug and play option from the factory? Wouldn't it be easier to use that harness?

[@aaronhollie2236]

I’ve tried everything possible, still have slight hiss in speakers. Ground is good, still have sound with NO RCA input, amp is T400 Rockford fosgate, LC5i pro LOC, sky high wire. The ground reads 0.4 OHM. Power wire is ran outside of the vehicle. RCAs are reputable brand. Not sure what else to do. Tried multiple amps. Multiple LOCs. Gains are at appropriate level with amp input set to 4volts with multi meter. Any help is appreciated!

[@Ronc5200]

Did you disconnect the anc?

[@aaronhollie2236]

I’m not sure if my truck has it. It’s a 2020 Chevy Silverado non Bose 5.3

[@ricorivias1876]

Where do you get your remote wire from , what do you tie in to ?

[@octanetvchannel]

Passenger side of the dash You can remove that panel and there is a metal terminal sticking out which is switched ignition. We have a few other videos on Silverados as well

[@elmobascle8182]

So on your green wires you tapped into, that is just only the one set. Meaning like the drivers rear door speaker, no left and right? Thanks man!

[@elmobascle8182]

I’m about to install a single sub on my 2019 Sierra and didn’t know if I needed to tap off of 2 speakers or just one for my signal.

[@octanetvchannel]

You only need to tap one. If you get a chance watch our other video that we posted up about 5 to 6 months ago about how to install an l o c or line output converter. It will tell you a step-by-step process as well

[@elmobascle8182]

@@octanetvchannel Awesome man, I appreciate your quick response and help. Have a good day bro!

[@elmobascle8182]

@@octanetvchannel So I just hooked up a Alpine MRV-250 to one subwoofer. I used the signal level for on/off but when the amp shuts down I get a terrible humming noise and it seems like the amp won’t shut down at times. I have a good ground. Any suggestions on what I should look at? Thanks.

[@octanetvchannel]

@@elmobascle8182 I would check the impedance of the subwoofer and how you have it wired because that sub-amp can only run at two ohm

[@kaitknapp6804]

Great video. I’ve got a 22 Silverado non Bose and would like to run wiring down the passenger side. Do you happen to know the color of the speaker wire on the passenger front side? Thanks in advance!

[@cjrichardson7718]

Did you figure it out?

[@Must_Be_Luck]

a guy in another comment said he did that and he said "wire colors for me were blue with black and a white wire"

[@lilbabyboi24]

Great video guy… thanks so much

[@dmon5557]

Grounding point for amp?

[@jamiekilbury7346]

I would use the bolt that jack...go under carpet and then run the nut you took off

[@ImGootz]

What size t conector did you use to tap into speaker wires ? I’m having issues getting correct size

[@octanetvchannel]

Red or black

[@ImGootz]

@@octanetvchannel thank you ! First time hooking up a sound system ! Was using yellow ones and couldn’t figure out why I wasn’t getting a good connection 😂

[@patrickgreen6835]

Should have let you guys get me hooked up. I have this exact truck, guy went to connect the wiring to the battery. Now my truck wont start. Has power, everything works...just goes dark when i try to start it! HELP!!

[@daniellickel9867]

Do you have a link to a video showing how to hook an amp and subs into a 2021 chevy 2500HD with Bose and the duramax? Not sure what engine it has makes much difference. Thanks

[@octanetvchannel]

Yes if you go back about a few months you'll see a video we did on a Denali with bose

[@daniellickel9867]

@@octanetvchannel thank you!

[@SpookyMontero]

Thanks 🙏🏽

[@laleydeiguala6367]

I love watching what you due to the new trucks amplifier wat amplifier you use and watts

[@octanetvchannel]

AUDIO DYNAMICS and shoot us an email we can try to help you out [e-mail]

[@laleydeiguala6367]

Tanks I going to make small video wat this people putting on I 2020 gnc sierra a don't like how is sounds and I send you to you Tanks bro

[@bryanbarrette3004]

Gday, I have a 2021 RST 1500 Silverado ,Crew Cab ,with the Bose system and moulded plastics under my rear seat. I’m looking to purchase a box for two 10” . Can you help me ? Thanks.

[@octanetvchannel]

Is it this body style?

[@bryanbarrette3004]

@@octanetvchannel Yes, looks like the white truck you were working on. Actually mine is also White.

[@bryanbarrette3004]

I should tell you that I am located in Canada, Timmins , Ontario.

[@christopherwilson7698]

Octane. Who makes that Box ???

[@octanetvchannel]

There are a few people that manufacture it I believe we got it off of eBay because they're really hard to find right now.

[@christopherwilson7698]

@@octanetvchannel thanks for responding buddy. Do you have a suggestion for a 2020 crew cab ram 3500 new body. I’d really like 2 subs one box but 1 10”/1 12”. I think that would sound excellent punchy and dropping

[@sheetrocking]

how much does something like this cost?

[@octanetvchannel]

Depends on what series of subs and amp but typically around 1600 to 2,000

[@shanebozack]

Great video, what brand was that amp you are using. I'm having a hard time finding a amp to fit. And that amp is perfect

[@octanetvchannel]

Shoot us an email we can get you one [e-mail]

[@Eladen88]

What box is that?

[@jamiekilbury7346]

Ebay

[@graygoose8938]

The only thing i dont like is the terminals on top of the sub box. should be located on the back or bottom. out of sight. NICE INSTALL

[@chaytonpolo7128]

💪🏽💪🏽🔥🔥

[@riverfallscory]

Dang those enclosures are not available I was ready to pull the trigger.

[@albertoguevara9546]

Mi troca no tiene para conectar el remoto, es una silverado 2022 rst

[@juannuno9069]

Anyone know if it’s the same for the new 2022 refresh

[@octanetvchannel]

Should be the same

[@BBearBuilds]

Awesome man

[@alejandrocantu6228]

Where did you ground the amp to?

[@octanetvchannel]

You can ground it to any of the seat bolts underneath the rear seat

[@brettburke9896]

@@octanetvchannel did y’all scrape any of the paint off of the seat? Or did you just bolt to the top of the seat bracket

[@octanetvchannel]

@@brettburke9896 definitely want to grind it down to bare metal

[@brettburke9896]

@@octanetvchannel that’s what I figured I normally do but I didn’t know if these truck had something others didn’t lol

[@bryanclark377]

your email dont work i do have the bose audio system in my 2021 chevy silveraydo rst 1500 crew cab 4 door same radio system and i want to know if you were to send me everything for it just like this how much would it be i can provide payment and shipping address

[@jimmybartels]

The box is sitting on top of of the floormat 🤦🏻‍♂️ You gotta take it all out to clean the floormat? Also, the firing subs could be damaged because they could potentially hit the protruding part of the floor mat. 🤔

[@DisasterInExile]

His floor mat was cut for the under seat storage...

[@justinturbo4323]

Is it better to face the subs down? If so why?

[@WE-The-People-July-4]

👍👍👍🇺🇸🟥🌊

[@ChrisHyde]

You should never run power alongside signal...

[@getpitted08murdersquad17]

Ok so this video helped tremendously but I do have a issue with my setup I did something wrong and could use some help lol ok so with everything plugged in and wired Up I have almost no bass but if I take one of the rc cables out of the amp it works like a charm but as soon as I plug the second rc cable in the amp it loses 90% of the bass any thoughts as to why and could I just run it as is with one rc cable to the amp

[@octanetvchannel]

I would probably say it's in the line converter either it's wired wrong or it could be damaged? I would probably start there

[@vee9815]

The video is not detailed

[@cold022]

What kind of tape is that on wires going to amp?

[@octanetvchannel]

Tesa