2019 Adventure Force Savage Spin Review | Walcom S7

Buy Link: tinyurl.com/get...
The Savage Spin is the modern Barricade turned to 11, with ad 45 Dart Capacity, 95 FPS with 6 AAs, and an awesome shell with a neat gimmick. This blaster does just about everything perfect!
MUSIC: Fastfall
ENDING: Upside Down (Remix) by Vita
LIKE & SUBSCRIBE HERE: bit.ly/Sub2Walc...
WATCH MY TOP VIDEOS HERE!: bit.ly/WalcomS7...
FOLLOW ME!
FACEBOOK! - / walcoms7
TWITTER! - / walcoms7
FUZZY WALRUS INDUSTRIES DISCORD! - tinyurl.com/FWI...
Fan Mail Address:
WALCOMS7
1673 S. Market Blvd #10022
Chehalis, WA 98532
About Walcom S7:
Building things that shoot foam darts incredible distances, extremely quickly, in insane quantities.
When it comes to blaster reviews, mods, and discussions; look no further than Fuzzy Walrus Industries.
Walcom S7
/ s4league
#AdventureForce #SavageSpin #Review

[@alaeriia01]

So this is the updated version of the Dart Zone "Not Shit Doominator"?

[@kyparalegal]

"Quatroblast"

[@nc_yh]

i liked the doomintor

[@WalcomS7]

With all these great Adventure Force/Dart Zone Blasters it's hard to pick a favorite now...

[@myleg4857]

I agree buy for me its probably the scorpion or the enforcer

[@alaeriia01]

The Magnum Superdrum is still my favorite.

[@Jackalblade9]

What's weird is the dart fit is really poor on my Savage Spin. Even with fresh darts there's two or three barrels on every cylinder that won't hold a dart in them...I mean the darts fit inside fine, but if I angle the blaster down they drop right out. I don't really have the tools or means to brass them, is there some kind of poor man's fix out there for this kinda issue?

[@zeroblade6599]

@@Jackalblade9 tiny bit of tape inside the barrel should fix that for ya

[@Chaosghoul]

Hey @Walcom S7 cool video as always, but aren't ypu severely cutting down on performance when using rechargeable batteries instead of standard AA? depending how it's wired you're going from 9V down to 7.2V (not sure if it has a voltage regulator inside, but I doubt it).

[@gabrielshensky348]

Walcom is the big man on campus with all these late night releases- Gives me something great to watch at the end of the day

[@WalcomS7]

It's just my terrible sleeping schedule.

[@homelee665]

While it might not set the world on fire, I think this is a solid blaster for HvZ and some PvP.

[@nerdacedemy6947]

I agree

[@pigfish99]

Those flywheels sound like they're either screaming to instill fear into your enemies, or because they're in pain. dunno which is which. The main mod I would do is installing a nerf rail, and perhaps a nerf stock point to it.

[@rogerramiussergeialexander5541]

It sounds like both. Pain causes fear in others.

[@MrStrikecentral]

I'm guessing the slogan, "It's Nerf or Nothing!" isn't really holding up anymore...and that's great! I love to see these other brands shake up the usual formulas and come up with some really nice new ideas and systems! Hasbro needs to get out of their comfort zone and innovate more.

[@willpsanford]

this seems like a very good blaster for hvz in its stock form

[@JP-JustSayin]

High capacity w/o mags, 20% more punch than stock hasbro, AND it comes with the good darts in the package, for $30 plus AA's ... this thing is a great off the shelf gateway to the rest of the hobby.

[@JiJ1511]

Oh baby. Eat your heart out Spinsanity 3X.

[@tsmcgu]

Really happy with this blaster. Put four IMRs in it and honestly only got another 10' or so out of its (already great) range. Maybe a little faster spin-up time. Think this will be my go-to for stock games for foreseeable future. I really like the profile too. My stock was solid, I'd look at returning it. With stock out and hand on front grip has a solid SMG feel. Rotation action is kinda loud (indoors).

[@CeeWorld69]

Hi, what is an, “IMR?”

[@tsmcgu]

@@CeeWorld69 IMR refers to Lithium-ion Manganese Rechargeable, they're AA-sized batteries that are used in things like e-cigarettes and cree flashlights. They provide boosted voltage and amps "without requiring" upgrades to the blaster. But they can be borderline dangerous and cause motors to overheat, etc so use at your own risk

[@CeeWorld69]

@@tsmcgu oh ok, thank you. So you’re saying out of the 6 battery slots, you put in 4 IMR batteries and that was good enough to get extra power without messing up the motors

[@kennethgibson7483]

Been bought one....my stock works....I like it!!

[@derrickjohnson5368]

Just had a small 1 on 1 and he had a fully automatic and I completely wrecked with this. Accurate, fast, effective, and so far reliable I have got to get another.

[@darrenvoong9013]

Where it says extends up to 2 feet I thought said fires up to 2 feet

[@biohazard724]

_very_ close quarters battle

[@kabelguy70]

If Nerf were actually honest

[@thisisjustadistraction25]

i'd use this over magazines, because you can pick up darts from the floor, load them in the blaster while you are shooting,and also carry spare darts with you for reading on the floor

[@grmpynrthmn5371]

Another day, another blaster Australia won't get...

[@EggPogsia]

GrmpyNrthMn it’s even worst in the uk

[@grmpynrthmn5371]

@@EggPogsia at least you get Rival there..

[@EggPogsia]

GrmpyNrthMn bro we’re still on the khronos

[@grmpynrthmn5371]

@@EggPogsia That's more than what we got...

[@user-jp2ne1mc8k]

Dude you must have a lemon because mine works flawlessly.

[@nicholasmazzarella2720]

WS7 A super fantastic review. The facts and opinion are awesome. 45 dart capacity is outstanding and 90 fps wow. Thanks for always taking the time to do reviews on new blasters. Keep up the great work.

[@rokushou]

It's the boomco spinsanity but with darts. It's a cool concept but I still prefer the fearless fire as my scavenger blaster.

[@Jk8Z]

I think this could be really useful in certain games if you re-barreled one of the drums for Mega!

[@Jk8Z]

Wait, no, I'm an idiot.

[@LeSpade72]

This thing is like a boomco spinsanity 3x on steroids

[@robindabank467]

imagine dual wielding them with a custom leg mount and modified drum change pump handle that slides into leg mount that way you have 90 darts and you can pelt the enemy for twice as long :D

[@adamfazar8364]

It's a standard dart version of that one boomco blaster

[@dpoopoop]

Spinsanity 3x

[@adamfazar8364]

@@dpoopoop it has an x bc anything with x in the name is cool

[@luisfloresjr2173]

X TREME

[@matthewgarcia5685]

Between this and the Destructor Dart Zone has a great lineup this year! The tactical rail can be used with other adventure force and n strike tactics, however you need the adapter which is included with the Alpha Rogue blaster.

[@MyaIsWithIt]

I got this a month ago. But my stock is good it dont push in without pushing the button. Also your motor is very loud mine is no where near that loud. Maybe try taking it back and getting a different one.

[@orca1361]

I been playing airsoft and I would love to put a gear box and other things in it, use it in game. Such a pretty shell.

[@hazard4349]

I saw this one at walmart

[@midorimacaw]

I bought one of these the day they were released, had it in my hand before it hit the shelves. It was my favorite blaster shown off at EndWar, and I knew I had to have it. That being said, I will confirm that my unit also sounds like death. Mine also tends to smell like smoke a little when it first fires, like it's burning the first few darts that go through. I like it, though. Intimidation factor.

[@ArTchN_Ei8ht_Industries]

Hey Walcom. Aren't most blaster with cylinders or front loading barrels already conically tapered towards the rear where it's a narrower opening and that's why most modders rebarrel them so the whole barrel is snug along the whole length of the dart? So why not just reverse the tapering at the factory like you said, "make it conical" with the wider opening in the back instead of the front to accommodate rear loading? And since this is a flywheel, it doesn't have to be conical, it can just be a straight cylinder that has a snug enogh fit on the whole length of the dart, but not too snug that the pusher mech has a hard time pushing the dart forward. Companies that make these blaster might even save money and materials if they don't have to put a "back stop" for the darts to prevent users from loading the darts too far back. The inside diameter of the cylinder will be uniform throughout the length of it, thus saving some more on materials used as supposed to having more material towards the back, which is how it is right now so the dart has a more snug fit in the back only to allow operators to front load easily.

[@WalcomS7]

With Flywheelers, not really. They don't need a firm grip on the dart because they don't rely on Air Pressure, and in fact they need less resistance to have an easy time pushing the dart into the flywheels. Making it more snug not only makes reloading a bit more difficult (thus defeating the purpose), but removing the back stop will make it so if you push a dart too far in (or not far enough in from the rear) the mechanism will jam. I solved this with my RUST Thompson by having a plate in front of the cylinder that acted like a stop and made it rear-loading only, but I imagine that they could have a conical shape that grips the dart in one spot that makes it so you can load it from behind or the front however you please and not have an issue molded right into the cylinders which would make both methods viable.

[@toascranill5464]

"Break down the box, ever so slightly." Proceeds to brutalize it.*

[@dpoopoop]

500th view and 25th comment

[@whyiwakeup6460]

I only really have 1 shot springers so this will spice things up a bit.

[@TheSybermedic]

Nice video, I would replace the stock with a 3d printed nerf stock attachment point.

[@TheRealMycanthrope]

Stock lock needs a spring upgrade I'd say

[@bakagamer4]

this makes me want to buy a dart zone blaster but I can"t.

[@itchyprince3793]

Baka Neko why can’t you?

[@bakagamer4]

@@itchyprince3793 dart zone doesn't sell their products here in philippines

[@zeroblade6599]

@@bakagamer4 not in the Netherlands either, oh well..

[@braincube013]

Definitely buying

[@bz4701]

Grade: Gold Medal! New standard!

[@savagenoob1016]

I feel like dart zone is the clone wars of nerf

[@ethanbrandt8617]

A brand new flywheel set would make this thing even better. And then you could buy multiple of the stock guns for the drums, pretty much you'd have front loading 45 dart mags

[@coastaku1954]

Weird, my savage spin is doing 100fps (I was able to line up my chronobarrel)

[@rodemus18]

Hey Walcom S7 I thought of a good mod idea! Use a super magnum drum and attach it to the savage spin

[@dleonidae]

isn't that one a 40?

[@rodemus18]

dleonidae yes and it’s also by dart zone and prime time toys

[@runesrensen663]

Today i ordered one. Its on it's way. I would wish there was more dart zone pro blasters available in denmark. Im rly getting into blasting.

[@dudepool7530]

That drum kinda reminds me of Heavyarms' chest grenade launchers.

[@jehcgundersons1465]

the stock problem that you had, i believe you have dud because my stock works fine and stays

[@stickman9571]

I really want that gun for Christmas.You can also get a refill pack with 200 darts.Just in case if a dart was lost.

[@pringles3254]

If you buy the AF roleplay sets you can use the sights from them on the tac rail

[@thisisjustadistraction25]

unlike similar nerf blasters, this isnt a jolt reskin(all nerf blasters are a jolt reskin)

[@supercoolstar2356]

Oh wow I'm so early!

[@itzfiz1244]

Hi

[@thefozofoz]

Ooh

[@Spaceraptorderp]

Nice

[@williamaldred335]

Only if it was avaliable over here in the uk...

[@gargunkle]

I think it's a pretty great blaster design. Though, a friend had a problem with his in a war. I think the active cylinder wasn't indexing, possibly. Not sure if he fixed it.

[@LetsDoThisFR]

Full auto would be sick with that.

[@harrywab]

Nerf would sell the 45 darts for 30 dollars

[@yanny122982]

Wish this used box magazines

[@metalandmayhem0660]

HOLY FUCK THATS AWESOME.

[@redenginner]

This with a little modification is pretty much the perfect Ion Rush blaster.

[@AngelAlvarez-kx9vv]

The hyperspin was its father

[@Fusako8]

Wonder if wiring the battery tray up to do 2x3 14500s would improve the spin-up speed.

[@blockprime3006]

This is basically a spinsanity

[@Ryan-br2gz]

*Insert M. Bison Meme Here*

[@CreativeUsernameHere-r1k]

Wow so kek!

[@stryfer6211]

oh my gosh ! very cool !

[@alaeriia01]

HOLY FUCKING OWO

[@angusmcflan]

Tediore stock, Dahl grip? :/ sorry man I think you got a bad roll

[@adriansue8955]

its soo ugly tho....

[@Cam-kh4xw]

Kinda looks like the quatroblast. Love ur vids man, keep it up!

[@adamsanchez1805]

Without the drum it kinda looks like a Kriss Vector machine gun

[@awe3975]

I don't know if he did this, but there's a button on each side to extend the stock.

[@ValTek_Armory]

you have to let your finger off the trigger fully. it is very finnicky

[@abquintic]

I had a few jams with mine getting used to the pull.

[@GummyBearRacing]

Like the barricade in my opinion

[@bestofbothworlds374]

SPEEN!

[@nirodha7028]

Cool blaster! Good review!

[@myleg4857]

First... Best nerf youtuber

[@vanhalenfan74729]

Ooo, a non BoomCo Spinsanity! I like it

[@stryfer6211]

imagine an under barel integration ...

[@orion7007]

Ah. Stockade on Steroids

[@doodbro931]

4:19 WHY DO THEY KEEP DOING THIS! This was the same issue with the rampage/raider stock, it’s useless having multiple positions if it doesn’t lock into place, because you go to shoulder it and it slides closed

[@thetribunaloftheimaginatio5247]

Between this and the Megalodon? Eh... I still want the Megalodon. I've got a Turbo Fire... yeah, I'm more of a springer-guy than a flywheel-guy. But that's just me. I'd definitely get one of these to use as a loaner.

[@michaelfinlay1412]

Villainator is a less complicated, more recent springer

[@LesbianPretzel]

I want one but I'm broke.

[@coolbean259]

Well its only 20 bucks