2019 Bass Tracker Classic First Upgrades

Рет қаралды 17,550

Күн бұрын

Пікірлер: 48

@WarEagledkp 3 жыл бұрын

Hey, I enjoyed your video. Thanks for the tips. I noticed your locked hitch lever (8:25 mark). You should really lock it in the down, or closed position. Someone can actually back-up to your trailer & pull it away with the hitch latch in the upright position. In the video, it may just have been the way the lock looked, so, no big deal if I saw it incorrectly.

@vNmBOSS 3 жыл бұрын

Thanks for the comment. You are correct. Not sure why i had it that way. I usually always leave it locked in the down position. I think i had just moved it there, and decided to make the vid before I finished getting everything put up. Great advice, Thanks

@GmanfromTexas 4 жыл бұрын

I took a wrench and bent the ears on the trailer just a bit and now the strap buckles fit without hitting the light fixture.

@markreading6377 4 жыл бұрын

I don't use them straps on my boat trailer don't need to the strap that pulls you in keep your boat on the trailer as long as you have trailer bunks

@GmanfromTexas 4 жыл бұрын

Mark Reading is good that your bunks hold your boat. My bunks are so slippery that the boat moves from side to side of I don’t strap it in hard.

@19ADAM80 4 жыл бұрын

My transducer came mounted to the ridge under the bottom right there, one thing I done to mine is bought a DD26 transom saver, I hurt myself and couldn’t hardly stand on my head to use that style which is what they gave me, and not only that it was starting to scratch up my paint!

@19ADAM80 4 жыл бұрын

I’ve gotta get me one of those Mercury Vessel View set ups for sure! 👍🏼

@willysfishingchannel1001 4 жыл бұрын

Yes for sure. Must have in my opinion.

@motoman3290 5 жыл бұрын

Thanks for showing me what you did to the cap 👍 I’ll definitely pull that out of mine for sure if I get a second can. Great video cant wait for a on the water one . Helps with my wait 😄

@willysfishingchannel1001 5 жыл бұрын

No problem. Glad i could help. Thanks

@johnbandurraga4412 5 жыл бұрын

I put the Fulton retractable tie downs on my tracker txw. All you have to do is bend the tab a little on the trailer and it will give more room.

@willysfishingchannel1001 5 жыл бұрын

Thanks for the comment. I was considering doing that, but was unsure about bending it.

@Billy-f2f 4 жыл бұрын

Thanks for sharing the video.

@willysfishingchannel1001 4 жыл бұрын

Thanks

@redneckwarriors1 4 жыл бұрын

great information, thinkn bout getting me one of these boats at bass pro.thank you

@willysfishingchannel1001 4 жыл бұрын

Thank You

@bentlysupreme 4 жыл бұрын

Did you put an onboard battery charger in there as well? I'm still waiting on my Classic XL to come from Tracker, so I'm doing some pre-planning. I want to add a second six gallon tank or a 12 gallon tank, but I'm not sure if I can make it fit with an onboard charger.

@willysfishingchannel1001 4 жыл бұрын

I haven't installed a charger yet. I'm going to eventually though. On the tanks one of my 6 gallon tanks is leaking where the fuel line connects so im going to just buy a 12 gallon tank and get rid of the two tank system.

@daisydomergue9327 3 жыл бұрын

I have a 12 gallon tank and a 2 bank battery charger everything fits fine and there is plenty of room left over

@alanbabonoyaba6942 2 жыл бұрын

@@willysfishingchannel1001 what 12-gallon tank did you end up buying? I'm worried about clearance issues

@willysfishingchannel1001 2 жыл бұрын

@@alanbabonoyaba6942 I haven't done so yet. We haven't been using the boat much and when we do it has been short trips.

@superdave579 5 жыл бұрын

Just an FYI...If you take a hammer and whack the tab a couple times it will move I promise!! I did that to mine on both sides and my boat buckles which are alittle bigger than yours fit with room and it looks alot better too!

@vNmBOSS 5 жыл бұрын

Thanks for the info. Im thinking about doing that.

@superdave579 5 жыл бұрын

If you take a hammer and beat that ear back a few times it will straighten out and your boat buckle will fit better, look better and straight, and you won't have to worry about accidently knocking your brake lenses. I did it to mine and you wouldn't even notice I hammered them back unless I told you. If you could post pics here I would and show y'all...

@vNmBOSS 5 жыл бұрын

Thanks for the info. I have seen and heard of a few people doing that. I'm not sure i really want to bend that metal, and possibly make it weak?. Maybe I'm over thinking it. It's something I'm still considering though.

@superdave579 5 жыл бұрын

@@vNmBOSS totally understand, but I promise you won't hurt it one bit.

@19ADAM80 4 жыл бұрын

@@vNmBOSS Just get a big adjustable wrench and barely bend them in, about a 1/4” at most, before you do that either use a rag over the bracket or wrap black electrical tape around them so you won’t chip off any paint, be easy because with a 12” adjustable wrench it don’t take much at all to bend them in..

@Swanny713 5 жыл бұрын

Great video! Thanks for sharing. What cover do you have and how much did it cost?

@willysfishingchannel1001 5 жыл бұрын

Thanks! The cover was purchased from Academy. Brand is Marine Raider model D Trailerable boat cover for 17-19ft v-hull and runabouts. I think i paid around 50-60 dollars for it. I like it so far. It has adjustable buckle straps to tie it down. Much easier than using rope or bungee cords. Also has an elastic cord sewn around the edges that really helps with fitment.

@geebav1 5 жыл бұрын

Great video, can you say how much the vessel view cost.

@willysfishingchannel1001 5 жыл бұрын

Thanks Gary. I was lucky enough to get the Vessel view on sale for 150. Mercury has it listed for 225. Link is below publications.brunswick.com/ProductDetails.asp?ProductCode=VV-MM

@geebav1 5 жыл бұрын

@@willysfishingchannel1001 sweet, that's a great price

@willysfishingchannel1001 5 жыл бұрын

@@geebav1 Yeah i was gonna wait awhile to purchase one until i saw the sale on Mercury's website.

@superdave579 5 жыл бұрын

I've also noticed on my tank cap that if I unscrew the vent my tank still swells up, but if I screw it down like when I'm transporting the boat it doesn't swell...shouldn't that be the other way?! I still on the fence about taking out that ball like you did...guess it couldn't hurt anything.

@vNmBOSS 5 жыл бұрын

Thanks for the comment. That is odd for sure. Yeah im not a fan of these tanks. Well really the tank itself is fine it's just those caps. That red bulb/valve slides over a stem inside the cap. It just slides right off. Also if you are careful when you pull it out you can always reinstall it later if you change your mind. The first one i removed tore because i didn't have the pliers down over it enough, but the second one didn't. After that tank spit out gas into the back of my suv, and in my boat i had to do something about it. Now it works normal no more swelling and spewing gas out.

@pspblows99 5 жыл бұрын

you wont get good readings on the depth finder while you are moving fast. i do not know the threshold, but below 10MPH you should get good readings

@brperez11 5 жыл бұрын

I just use a quick disconnect for my two tanks

@redneckwarriors1 4 жыл бұрын

how many hours do you get out of one gas can

@willysfishingchannel1001 4 жыл бұрын

One of the spots we go fishing at is around a 40-45 min boat ride one way and both times we have went there we had maybe a quarter of an inch left in the 6gal tank. Now keep in mind we were running wide open straight there and back. If all of your fishing spots are close together and not to far out 6gal will be plenty for most people.