BASS TRACKER CLASSIC XL UPGRADES!!!

[@mykb93]

Picking up my 2023 today. Glad I found this. Just mad an Amazon list! Great vid and additions!

[@BredForBass]

That’s awesome buddy!! Thanks for watching and make sure you subscribe I have plenty of other bass tracker classic xl content.Enjoy your boat!

[@crankbait918]

You truly made the boat your own. Really like the attention to details used for all the additions. Looked like it was cold in your garage. Currently -4 here in Northeast Ohio. Spring can't get here soon enough. BFB Family.

[@BredForBass]

Thanks! Yes it was very cold 😂 I bought a heater for the garage just have not had time to install it got to run a new 240v to the garage.

[@kelena1958]

That's a lot of upgrades, brother. Thanks for the video.

[@BredForBass]

Lol yes it is I think I’m finally done though maybe livescope at some point but that won’t be for a while.Thanks for watching fam!

[@x_Gorilla]

HOMIE.. I watched 100 videos on upgraded Trackers, I'm about to get a Tracker 160.. not a single f'n video mentioned that transom/stern saver pad - ..so first of all. F'N THANK YOU .. why the hell hasn't anyone mentioned it and showed it, dude.. that's f'n sick.. saved me a headache and a half.. subscribing just for that shit alone.

[@BredForBass]

Glad I could help buddy hope you enjoy your new boat If you ever have any other questions email me at [e-mail] or join our Facebook group and message me on there I’ll be glad to help!

[@johnh5463]

Just ordered one today I can't wait thanks for posting this, tons of information. I can see your passion and love for it Good luck!!

[@BredForBass]

That’s awesome buddy it’s a great boat hope you enjoy it!!!

[@snorlax7579]

Another positive with that trolling motor upgrade is the foot pedal is low key so no need to drill a recessed foot tray! Love the boat man

[@BredForBass]

Facts! I almost put one in to still have the tray sitting on a shelf so glad I didn’t though no need for it with that pedal.

[@joevigil322]

Great upgrades...thanks for sharing.

[@BredForBass]

Thanks buddy appreciate it! Thanks for watching

[@bobwc629]

With 3 batteries don't forget the onboard alternator battery charger...it's worth it, if you have the room! With my setup I'm running 2 batteries, 2 gas tanks, an onboard charger and a alternator battery charger. I doubt if anything more can be placed in the back end. If I needed a 3rd battery it would have to go into the tackle storage area behind the driver's seat or into the extended front deck area for balanced weight distribution so the "ass" end doesn't too heavy! By the way, really nice mods! Living in Ontario, Canada this same basic model cost me just shy of $25,000 (with taxes), plus around $3,000 of additional parts and labor. There are times I wished I lived in the US!

[@BredForBass]

Yea 25k is steep!

[@basswhisperer4803]

All the mods to the boat are amazing!!! Great video to take in for when I get mine!

[@BredForBass]

Thanks bud appreciate it! Glad I can help good luck with your boat they are the best bang for your buck.

[@basswhisperer4803]

Especially with gas prices now of days. Even at $5 a gallon, $30 to fill up an empty tank isn't bad.

[@brianadamson2702]

Awesome job on the boat, very simple but effective.

[@BredForBass]

Thanks buddy appreciate that!

[@rickcorrea5225]

Great video Matt 👍😁

[@BredForBass]

Thanks buddy!

[@DoubleTFishing]

Love the glove box!! If you have too much trouble with the transducer cable on the Terrova I just used a rod sock wrapped around the shaft, used it two years now like that and haven’t damaged the cable yet

[@BredForBass]

That’s a good idea! I’ll keep that in mind going forward thanks!

[@RCBassin]

Great vid man! I have done a lot of upgrades to mine as well and your right, you can easily set this boat up to fit your fishing style!

[@BredForBass]

Yes you can!

[@docriordan7787]

Your loaded up with the upgrades, I was holding with you for awhile then you walked away. I have the step also but really need a grab bar for stability. Right now I'm looking into adding a Drotto Boat Latch 3" which would help when loading solo.

[@BredForBass]

Yes I’m definitely loaded up lol but I think I’m finally done adding at some point I’ll upgrade but I’ll be running this boat for at least another season.Yea those drotto latches seem good hopefully it Does the job for you bud!

[@Mdmsr]

I have the Drotto; absolutely love it!

[@hollandsauce8422]

Nice boat! I have a Heritage with many similar add-ons. Some recommendations not criticism…. you don’t use the Terrova built in transducer? It’s not great but it’ll alleviate some of the tangling wire issues. Also I use detachable trolling motor mount as my cover doesn’t fit well with bigger trolling motor. An upgrade I absolutely love is swapping out 1250gph cartridges in both aerator and bilge pump. Takes about 30 mins and cost about $30 each. I use live bait a lot so filling livewell in seconds is great. And also are your ram mounts 1”? I use 1.5” and 2” as they’re much sturdier with the weight of 9” screens. I have livescope but keep it on portable base as I switch from boat to boat. I use a transom trolling motor mounting bracket and attach a transducer to aluminum pole. **I’m stealing the rod holder buckle idea. Those are sweet

[@ShaneFlintOutdoors]

Great run down on all your upgrades!!

[@BredForBass]

Thanks bud appreciate it!

[@anonimous596]

I used that same transducer pad -- I hate the idea of making holes in the boat so far its working great and spot lock -- worth the money for sure if you fish alone like Ido - great upgrades!

[@BredForBass]

Thanks buddy appreciate it.The Pad held really well for me worth every penny

[@anonimous596]

@@BredForBass me also,i just did not want to drill holes in my boat below the water line! great upgrades!

[@dbeck582]

Nice work!

[@BredForBass]

Thanks buddy!

[@westonmavis6566]

My main issue with these boats is lack of rod storage. I’ll pay the extra for rod lockers. But you’ve made your boat work for you looks good.

[@BredForBass]

I agree a lot of people put rod lockers in them I thought about it but ultimately decided against it.I plan to upgrade to bigger boat at some point in next few years but it definitely does the job for now.Thanks for watching !

[@Therapy-n-Session]

I have the same boat but mines is a ‘22. The seats are on recall, you might want to call Bass Pro. My boat has been at Bass Pro for 6weeks waiting on seats to complete the recall.

[@BredForBass]

Yea I’ve seen people been having issues mine have held up well so far after a year and I’m a big guy.If they break I’ll put red ones in anyway 😂

[@bidkid2020]

You definitely got your boat decked-out nice job you don't happen to have a video out on putting that gt54 transducer on the back I have the Garmin 73 in the back and the 93 upfront just installed it over the winter the one at the console not sure who put the transducer on correct

[@BredForBass]

No I don’t have a video unfortunately sorry bud thanks for watching

[@Mdmsr]

Great Video Matt! I upgraded my CXL with most of what you have, major difference is I added the Maxxum TM (12v, 55 lb). I will be selling it in the near future as I just bought the Pro Team 175 TXW TE; need to accommodate 4 people on the boat.

[@BredForBass]

Thanks! Hope you enjoy your new boat man be safe out there!

[@richardgreene7412]

I am trying to upgrade my console graph and cannot figure out how to get the transducer plug through the shifter panel. Curious how you did yours. Thanks

[@cory9687]

Nice mod's man. Those lights look siick at night.

[@BredForBass]

Thanks buddy appreciate it! I love them adds a nice element to it!

[@curtiscarlton357]

Do you have a link for the led lights you bought? Nice upgrades

[@NinjaEyes]

Do you have a link for which stern saver mount you used? have you had any problems from it? Love the classic content brother..... keep it up

[@BredForBass]

I don’t have a link I think I got it off Amazon there are a bunch of different ones but all similar in how they go on.It’s held up great I actually ripped my transducer off couple years ago but the pad didn’t budge!

[@humbesand1741]

Good video, where i can buy the removable step glove box, the same one you have for the same boat. thanks

[@BredForBass]

Thanks for watching! I built it actually

[@christopherashley5200]

Hello bred please show how you built the storage box next to live well

[@BredForBass]

Go to some of my first videos I made a 3 part series showing how I did it all.

[@sd9254]

Great upgrades..do you have a link for the rub rail and lights?

[@BredForBass]

Thanks!!! Unfortunately I don’t remember the exact brands of either but the rub rail is just furniture guards should be able to find it on Amazon if you type that in.Same thing with lights I just typed in boat led lights about a million options come up unfortunately I don’t remember the exact ones it’s been a while now.

[@raymondpeffer8355]

i am planning on purchasing the same boat. i’ve seen a ton of videos on youtube and yours are easily the best and most informative. do you have any plans or step by step videos on the deck extension. also what about the aluminum plate for trolling motor as I plan on upgrading the troller to the terrova immediately. thanks

[@BredForBass]

Yes I have videos on both casting deck extension build and aluminum plate install video.Just go to my page and find videos then start scrolling down you will come across them all.Thanks for watching appreciate it!

[@sfdten75k]

I would love if you could post the links to the items that you bought on line.. Love following you.. ty for what you post.

[@BredForBass]

Absolutely ill put them in the description soon that’s my fault bud I always forget to do that lol

[@BredForBass]

Thanks for the support buddy!

[@Marel1224]

I wish you had links to the items you’re talking about instead of making a search for them. The step box is one of them. Did you make it or did you buy it premade?

[@kevinwilliams8899]

Great video. I have done some of those upgrades on my Tracker Heritage. Is it possible to get the plans/dimensions on the casting deck you made?

[@BredForBass]

If you go back to some of my first videos there is a couple videos showing how to do it and what materials are needed.Thanks for watching

[@NbrdaveH-if5tw]

I will be picking up my 2023 classic xl the 1st week of April really pumped! I did watch all of your videos regarding the classic xl. Ty for that! My question is... I did watch the video of you explaining the fitted cover that comes with it however I am adding a new casting seat and the 22"-29" pedestal same one you got for the front. I'm assuming I will have to take the new front casting seat and pedestal off for the cover to fit? I will keep the original for in the rear for my grandson it's much safer at his younger age

[@BredForBass]

No you can leave the seats in as long as they are adjusted all the way down.It’s better to leave them in also because it helps with water run off you don’t even need poles if you keep your two seats in.

[@NbrdaveH-if5tw]

@@BredForBass perfect thanks again!

[@BredForBass]

@@NbrdaveH-if5tw no problem buddy glad I could help

[@Fenderlover1992]

What are you using for onboard charging? Do you have a link? I was originally planning on using a standard car battery charger… But the more that I read on it I’m thinking I might get a Minnkota precision on board 2 bank charger one for my motor and starter engine one for my trolling engine I’ve also read up on the Kota alternator charger, but heard that it’s not really worth it. What are your thoughts?

[@MattMccormack-v2r]

Where did the amazon links go? Am i missing or not seeing something? Thank you

[@stevesteve4350]

Russell Marine Products has Amped Outdoors 60ah 12v lithium batteries. I got two for $760. Will you please do a show on oil change and yearly maintenance? Thanks 😎💯

[@BredForBass]

Honestly I took mine to someone else for oil change and winterizing but I’ll do it next time and I’ll put up a video when that time comes.

[@Jay-mv5th]

The step seems like it was forever ago. I remember when you put that on. Time is flying.

[@BredForBass]

Lol yea it seems like forever ago that’s for sure!

[@FranklinHicks-qs4gs]

Do you have links for any of the add on items? I'm really interested in the step on the trailer. When you added the trolling motor, I see a large metal plate. Did that come with the motor or is that aftermarket as well? Thanks

[@letsgofishinsc4750]

Where did u get the console box? Between the seats?

[@bentlysupreme]

What's the brand name of those retractable transom straps? The 2021 BTC is pretty small and I want to get the right ones.

[@BredForBass]

Follow this link these what I got www.cabelas.com/shop/en/boatbuckle-rodbuckle-rod-hold-down-system?ds_e=GOOGLE&ds_c=Shop%7CCAB%7CTopPerformers%7CBoating&gclid=Cj0KCQiAi9mPBhCJARIsAHchl1yDrFOTsxNt8B5KeiXZVkbfz5gi9RF_IQlekkhnddf1wtfTB0RPN7gaAqJGEALw_wcB&gclsrc=aw.ds

[@bentlysupreme]

@@BredForBass Not the rod holders though I plan on getting those. The transom straps for the back of the boat.

[@BredForBass]

@@bentlysupreme my bad bud I misread that they both made by boat buckle These what I got www.amazon.com/BoatBuckle-Stainless-Retractable-Transom-Tie-Down/dp/B000KORVJY/ref=asc_df_B001GJ35VU/?tag=hyprod-20&linkCode=df0&hvadid=312062016371&hvpos=&hvnetw=g&hvrand=5194784282368975103&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9014947&hvtargid=pla-510132985167&psc=1&th=1

[@bentlysupreme]

@@BredForBass thanks, I appreciate it.

[@douglasdoyle7507]

Great job on the upgrades. I have the same boat but 2020, went out this weekend and had no power on the console. Checked circuit breaker at battery, voltage and all, 12.8 volt. checked for fuse box under console and found nothing there. All fuses on dash good but nothing works, horn, fish finder, cig lighter, lights, and pumps. Can you help me? Thanks

[@BredForBass]

Unfortunately I don’t know what it would it be.If you have Facebook you should join the bass tracker classic xl Facebook group they will be able to help you in there

[@djradrs199]

/??? did you do a video of the casting deck build ?? and the rear step / seat / glovebox

[@BredForBass]

Yes and yes lol they some of my first videos on the channel

[@chrissmusicbyrd2501]

I just got my 2023 tracker classic have watched the vid many times, can you explain how you built the "glove/step box" what did you use for the insides?

[@BredForBass]

I have a video telling how I built it earlier in my channel you will just have to scroll through

[@chrissmusicbyrd2501]

Found it thanks!!

[@frankiegilmore617]

We're did you get the led light system. I know this video has been out a while, but I was trying to find that type of light system for my boat. Thanks

[@BredForBass]

I got it on Amazon just go on there and type Boat LED lights there all kinds of options.

[@mayachapman1744]

Holy Sheet Batman, Here I am thinkin my BTC was deck'd out.... I DIG IT 🍺🔥

[@BredForBass]

Thanks I appreciate it! If you have Facebook join the Bred for bass Facebook group so I can see the rig!

[@mayachapman1744]

@@BredForBass I don't have social media anymore, #1 reason why I got the boat.... 4 years and counting 🍺

[@johngolembiowsk6813]

Can we get more links awesome boat tho

[@saltorres1061]

For your fish finder at the bow ? What power supply did you use ? Not running trolling motor source right ?

[@BredForBass]

No there are two wires up under the front panel capped off they run at factory for front electronics.It’s connected to cranking battery

[@timmcmurray3867]

Great job. I have the 50th anniversary and want to add the casting deck extension. Can that be purchased or does it have to be made?

[@BredForBass]

I had to make it!

[@timmcmurray3867]

@@BredForBass cool. can you offer any plans to allow me to make it?

[@timmcmurray3867]

@@BredForBass thanks. I found your videos about that and thanks for those. Did you screw the deck to the floor of the boat? If so, how long were the screws you used?

[@BredForBass]

@@timmcmurray3867 no I didn’t it’s free standing it’s in there tight though don’t move at all.Thanks for the support!

[@FishingbyAnthony]

That removable glove box did you build it or did you buy it if you bought it can you leave a link where you bought it from

[@BredForBass]

I built the box part but the dry box I bought off Amazon here is link www.amazon.com/DPI-Marine-Glove-Only-Black/dp/B0CD8VXJL5/ref=mp_s_a_1_14?crid=16ZMRJQOZ4DXG&dib=eyJ2IjoiMSJ9.lrG6s6XyotaJ1bYT5AgIhk7rKuVYQ33A7_GI-JmLeBoJdV0nrdKgUZhC61CMX3fUFLzDx1tE40se0heF4jGzLvp-geBUu9WInIgQKYlNd6pfNLtrAlQ8gm-kZ2yRH_XI9Akh_iOdlFNeVy4_5o0T_jUHTNSH-HDZI458-Oq8Nxukk-80wuCnRdJAyMLEX-LcxrGpEyN5JV7wwV0HPHHr-w.PGRcGljjOwxUavNVR14M3F8vcezrSBMB5_ac1kC_qGY&dib_tag=se&keywords=boat+glove+box&qid=1713402121&sprefix=boat+glove+box%2Caps%2C99&sr=8-14

[@louiedudefishing]

You still have link to rub rails

[@captainCA24]

Where did you purchase removable step glove box? Thanks

[@BredForBass]

I built it the black box part I bought off Amazon just type in boat glove box.

[@williamdavis5428]

Nice upgrades!! Did you have to move the seats apart to mount the glove box?

[@BredForBass]

No I didn’t

[@ericjones8305]

Looks great

[@BredForBass]

Thanks buddy! How’s your boat treating you Eric?

[@ericjones8305]

@@BredForBass It's great.Might take it out this week after work.

[@BredForBass]

@@ericjones8305 I’m jealous! Good luck out there if you end up going.

[@shooter3288]

Do you have the Amazon link to the Furniture bumpers you put on it? Want to make sure i get the right ones

[@BredForBass]

Just type in furniture corner guard on Amazon they all the same for most part just pay attention to the roll length to make sure it will cover the boat I think I got (2) 20’ rolls one for each side I don’t remember the exact one I got or I would send you link but it’s easy to find.

[@shooter3288]

@@BredForBass no problem! Thanks

[@charlienoble1210]

hey Matt, just to confirm is that terrova 12volt 55lb thrust and you just got two 12 volt batteries running parallel or is it a 24volt system with the 80lb thrust terrova .also after a few years of use how do you like it so far. I'm currently debating on going with terrova or ultrex

[@BredForBass]

Yes 12v 55lb thrust two batteries in parallel.Its held up great and I like it that being said I would go with the ultrex if I could do it all over.If you have the money I’d go with the 80lb 24v ultrex

[@patricktbarfield]

Did you use wood or metal for the cabin deck. I have the same boat and just cant figure the best way to go

[@BredForBass]

Wood top aluminum angle framing to keep weight down

[@bryanmoore9004]

Where did you get the cash ing deck extension

[@BredForBass]

I built it

[@billywhite6215]

Where did you get the carpet? Can you share the link?

[@BredForBass]

Boatcarpetbuys.com it’s the 16oz midnight star color

[@tomcecil8476]

Can you or did you change out the tiny 6 gallon gas tank for a larger gas tank?

[@BredForBass]

Yes you can I have not changed it out this motor sips gas never came close to running empty on a trip.Some guys add a 2nd 6 gallon some take out the 6 and add a 9 or 12 gallon

[@outofbounds218]

Can you give us the link to the rubrail? Thanks.

[@BredForBass]

www.amazon.com/gp/aw/d/B01MQIEWCV?psc=1&ref=ppx_pop_mob_b_asin_title

[@benw6554]

I have a 2019 bass tracker classic...what does the XL add...is it longer? Mine is 16'8". Do you have any cover recommendations?

[@BredForBass]

No it’s same size it’s just painted that’s the only difference between the classic and the classic xl.The tracker cover I purchased with the boat is awesome fits like a glove and you can travel with it on.I’m not sure how you go about getting it though I got mine through the dealer when purchasing.

[@benw6554]

@Bred For Bass ok awesome. Yeah those covers are nice but expensive. What kind of transom buckles are they? The ones on my boat are hard to work with. Is your live well 9 gal? Ever put 5 bass in there? Just curious. Thanks for the info

[@BredForBass]

@@benw6554 they are called “boat buckle minis” love them and yes my livewell is 9 gallon and I have had 5 bass in there that added up to 13lbs.Probably not getting 25lbs in there though

[@benw6554]

@Bred For Bass cool, appreciate it. Yea I'm going to get me some mini buckles

[@mikesgopro9388]

We're did the casting deck come from?

[@BredForBass]

I built it!

[@ntj030885]

Do you still have the low range unit that came with? I’ve been looking for a replacement for my 2012 bass tracker 165.

[@BredForBass]

No I sold it unfortunately sorry I couldn’t help!

[@ntj030885]

@@BredForBass thanks anyways man. By the way you got that boat looking mighty sweet. I like checking out all the mods. I need to mod my live well to recirculate.

[@BredForBass]

@@ntj030885 thanks bro appreciate it! I have definitely put a lot of time into upgrading it that’s for sure.

[@Joeblade1966]

How do you travel with your rods? Ty

[@BredForBass]

I just strap them down to the deck with rod straps or if I’m going on long trip then I will put my stuff in back of vehicle

[@Durants7]

Did you build the step/center console unit?

[@BredForBass]

Yes I did

[@carpetcommander985]

Can you please give the manufacturer name of the rub rail I can’t find it on Amazon

[@BredForBass]

www.amazon.com/Roving-Cove-Protectors-Fireplace-Pre-Taped/dp/B00H882WGC/ref=mp_s_a_1_1_sspa?crid=IZT2MJZPR4AS&keywords=furniture+edge+protector&qid=1649209587&sprefix=furniture+edge%2Caps%2C329&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFIQzRNT0owOUMwQjAmZW5jcnlwdGVkSWQ9QTAxMjA3OTMzTU03MUNKTE1CMVRYJmVuY3J5cHRlZEFkSWQ9QTAwNzcwMzcyR1FDSUlBUFJUMDE2JndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= hope this helps!

[@Steve_The_Angler]

🔥🔥🔥🔥🔥🔥