2019 CFMOTO ZForce 800 EX needs ALLOT of work

[@bruceriege7478]

love your hard work down to earth no nonsense

[@R.N.GPerformance]

Thank you 🙏

[@wooblebloc]

I can be a certified cfmoto mechanic just by watching your videos. Your Bloody legend mate. I won’t have to worry about taking mine to the local mechanic every time o need a service or something fixed (minor issues)

[@R.N.GPerformance]

💯 💯 my vids definitely help for sure.

[@jreed10291974]

My radiator cap leaked on my U-Force 600 till I took your advice and changed the antifreeze has not leaked in 4 months.

[@R.N.GPerformance]

That does make sense. The seals don’t like that china coolant at all. That’s good to hear

[@deanurbanek6577]

I recently bought a small electric ryobi pressure washer from home depot for my sxs, works amazing and would keep you from working on dirty customer machines! The one I got was about 100 bucks and has 1800 psi with two different tips, i recommend it highly! Vets get a 10 percent discount too!

[@R.N.GPerformance]

I asked them to wash it before they brought it. If it’s not clean I won’t be doing much to it. If I clean it it’s 200$ lol.

[@apocalypsev4528]

Love your videos thanks for all the info can't wait to order one of your clutch kits and helix

[@FANATICALSIDERIDER]

Always enjoy watching these videos. That poor buggy looks rode hard and put away muddy

[@R.N.GPerformance]

Thank you. It sure was that’s for sure.

[@markbeaulieu8004]

What about the A-Arms? Did you change out the bushings?

[@gabrieldunembad]

Where are you located my 2015 cfmoto 800 ex runs an drives like a top but I got some clutch rattle

[@SaboSells]

I can't find the spreader tool. What did you do with the loose a arm?

[@R.N.GPerformance]

I have that tool on my website rngperformance.net/shop/ols/products/cfmoto-oem-secondary-spreader-tool I tightened it up buddy.

[@rjmoose8918]

Any way to stop the break squeak? I hear it's a common issue. I have a zforce 800 with just over 200 miles and the braids squeak like crazy!

[@R.N.GPerformance]

Not really. Ours went away

[@deanscharphorn6035]

what happed with the A arms that looked bad

[@R.N.GPerformance]

I tightened it up was just a loose bolt.

[@ATVHOBO]

Just a question why wouldn't you spray down the bike to have a cleaner working service? I'm a bike mechanic and i clean shit before I work on it. It totally sucks working on dirty shit, unless you like getting extra dirty too? :)

[@R.N.GPerformance]

Because the things I did I wasn’t near the dirt and because I charge 200$ to clean a unit.

[@ATVHOBO]

@@R.N.GPerformance 200 for a quick high pressure spray down. I don’t mean to go to town on the bike. High pressure spray down and that bike caked with mud. Lol come on now I get time is money but brain power is free. Just so we’re clear not being a dick here I guess my age difference and what I was taught growing up and at a top school. I was told it’s easier to work on a clean bike then a dirty one that might contaminate something important.

[@MattGraunke]

What are you using for a lift? Sure looks convenient!

[@R.N.GPerformance]

Automotive scissor lift I got from eBay 2600$ really nice lift.

[@deanscharphorn6035]

Dean Scharphorn 1 day ago RNG performance is the only way to go for all your clutching needs. Reply Highlighted reply AdrenalineJunkieProd AdrenalineJunkieProd 19 hours ago How is their setup different or better than the MSC one? Reply

[@R.N.GPerformance]

Thank you 🙏