2019 DDJ-1000 v6.5.0 - BOME mapping for Traktor Pro 3 and 2 with jog Screens - DJ Estrela

[@djestrela2]

v7.0.0 DDJ-1000 TP3/TP2 mapping - June 2020 I've now remade my DDJ-1000 Traktor mapping entirelly from scratch. Major new features are 16x SuperKnobs, access all 9x MixerFX, Resonant Filter, STEMS, Remix decks recorder, Tempo enlarger, Loop backwards adjust, Turntable FX The mapping is now much faster to load, timestamps are 100% accurate and has dozens of bugfixes to the previous features ----- This is a 15 minute mix showing all the new features: kzbin.info/www/bejne/gZq3fp6EpLiqiJY And this is a 90 minute full walktrough: kzbin.info/www/bejne/pmSvY2SembaVsLs This is the the 61-page manual: github.com/pestrela/music/blob/master/traktor/mapping_ddj_1000/DDJ-1000%20-%20Quick%20overview.pdf

[@onsite2406]

I added your mapping today. Really appreciate the effort this is amazing work! For anyone else that may be trying this - I did run into an issue at first AFTER I had followed the installation instructions perfectly. The jog screens and many functions were still not working. I noticed however in Traktor's controller manager that the controllers and Midi In/Out were displaying long port names. They should say (BMT1) for everything, rather than (Bome Midi Translator 1). I was able to fix the problem with both Traktor and the BOME software open at the same time by going back in to BOME settings, and toggling the "Short Port Names" off and on. Everything changed in Traktor the way it should have. This will make more sense once you try it using Pedro's instructions first, and only if you run into the same problem.

[@djestrela2]

thanks for the kind feedback and for helping other users besides the 2x mapping files I also include the BOME settings file, which sets this parameter like that

[@ZouuuSladkiy]

I've been waiting so loong for this mapping ! thank you ! Excellent work

[@djestrela2]

Zouhair Lahlou thank you! Please see the installation pdf to install the bome mapping first. This is more complex to install than the previous mappings because of BOME!

[@djestrela2]

Currently implementing: redoing the whole Loop section from scratch. Will be able to adjust loop in / loop out positions just like rekordbox. Extremely useful for old music with live drummers that bestgrids badly. Similar for Beatjump section; now much simpler usage, including a "move me by 1 beat" like the S4 move encoder

[@AJOHNNYA]

Thanks so much for your effort. Love this Controller, love Traktor 3! Fantastic!

[@djestrela2]

JOHN ATHANASSIADIS cheers ! Check out latest v6.6.0

[@Garethuk2006]

Do you have any videos on why bome was required for screen control? i would love some in-depth details on the screen control. I've taken a look at the Pioneer midi sheet but it's not very clear to me

[@djestrela2]

pestrela.github.io/dj_kb/bome_mappings/#why-i-moved-to-bome-midi-mapping-impossible-features github.com/pestrela/dj_maps/blob/main/ddj_1000/9%20-%20Extras/2%20-%20Technical%20info/Technical%20Info%20-%20BOME%20side

[@luisalfonsovergara]

Hola pedro saludos desde colombia,Como hago para adquiri el mapeo compelto de la V-7.0.0 ddj 1000 para traktor 3 windows. incluyendo el BOIME. Me interesa .

[@djestrela2]

Send me an email to [e-mail]

[@djsiroki]

Hy! Can you send me private PLEASE the DDJ1000SRT Traktor Mapping tsi? I cannot registrationing on djtechtools becouse the registration on the website does not work.. Thank you when you can help for me!

[@theunknownpsychologist6751]

Fantastic work Pedro !

[@djestrela2]

The Unknown Psychologist thanks!!

[@RideitMTBAdventures]

Hi Mr.Pedro ! Cheers heaps for your mapping, just wondering, now that Traktor 4 is finally here, might you be doing a mapping for it ?? (-:

[@brandonunger1689]

This is ......awesome. Incredible work, sir

[@djestrela2]

you are very welcome! Some years ago, DJs could use any Software with any Hardware; this mapping makes a small contribution for this model.

[@JamzZ79]

Hi mate, There isn't an option to choose the controller Audio as I'm using IOS. Can you advise me on this?

[@djestrela2]

this is for traktor pro. it is macOS and windows only

[@georgeagrogiannis]

Hello Pedro, hope you're fine, may I try to set this version at MacOS Sierra 10.12.6 ? You thing it's gonna work ? Thank so much

[@djestrela2]

yes

[@TheMysteryF]

The mapping dont work on my mac what i make false?

[@djestrela2]

see page 35 and 36 of github.com/pestrela/music/blob/master/traktor/mapping_ddj_1000/Installation%20Help/DDJ%20Mappings%20-%20Installation%20Guide.pdf

[@Lordblanca-casablanca]

Will your mapping work on the latest traktor 3.4?

[@djestrela2]

yes, I'm running it now

[@francescogiglio6971]

mapping for ddi 1000srt with Traktor?

[@djestrela2]

use this mapping: maps.djtechtools.com/mappings/9222 request jog screens here: serato.com/forum/discussion/1736390

[@matheuslopes1707]

Pedro, o site do Map caiu... consegue ajudar?

[@djestrela2]

traktormaps.com/tools

[@denislavsarbolakov]

Awesome! Is it working with DDJ 800 ?

[@djestrela2]

Yes, I have a special tsi for 800 with some adaptations

[@denislavsarbolakov]

@@djestrela2 wow, super.. how can I possession with that ?

[@djestrela2]

It's on the same zip file

[@denislavsarbolakov]

⁠​⁠@@djestrela2Can you give me a actual URL for this zip file.. thank you

[@carlitoselnano87]

I NEED TO INSTALL THE PREVIOUS MAPINGS OR THE 6.5 INCLUDE THE OLDERS MAPINGS TOO? THANKS SIR

[@djestrela2]

Carlos Glez the zip file has everything you need!

[@djestrela2]

new installation pdf: github.com/pestrela/music_scripts/blob/master/traktor/ddj_1000_traktor_mapping/Installation%20Help/DDJ-1000%20-%20BOME%20verificaton%20of%20proper%20startup.pdf

[@djvdogg]

Amazing keep up the good work 👊🏻👊🏻👊🏻

[@djestrela2]

thank you!

[@DennisNy75]

Amazing work i will buy now for sure!! Youve answred my dreams

[@djestrela2]

fantastic! this is the best controller in the market

[@DennisNy75]

@@djestrela2 cant wait for you to finish the project. if i only have the demo of bomes will the mapp stop working ? or do i only need the demo?

[@djestrela2]

BadTapeMan this is released NOW. Bome demo works fine. Please see the FAQ at maps.djtechtools.com/mappings/9279

[@SlaveeSadovsky]

Good Job. You have plans add album / song cover ? Is possible? Or waveform and hot cue ?

[@djestrela2]

Slavee Sadovsky please see faq #1 Q1: Are Waveforms, Artwork and Cue scope supported? A1: MIDI mapping screens do not have these features. It only display numbers. This is the same case as DJayPro (demo). Only reversed-engineered HID mode that VirtualDJ is able to show waveforms and pictures (demo).

[@felixrg6855]

Does it still available to download? I have registered but it keeps saying that the link doesn't not exist

[@djestrela2]

Felix R G yes, almost 3200 downloads so far. Please try using another browser maps.djtechtools.com/mappings/9279

[@petersamyn1839]

is this the full version of traktor pro 3 that work or only the jog sreens or full working in the download link ?

[@djestrela2]

Peter Samyn i dont understand you. This can be tested with the demo of tp3 and demo of bome Also works with tp2 See the faq here github.com/pestrela/music_scripts/blob/master/traktor/mapping_ddj_1000/Installation%20Help/DDJ-1000%20-%20Frequently%20Asked%20Questions.pdf

[@sebass297]

the link don't work :(

[@djestrela2]

Sebastian Ortiz it worked for 2700 persons. be sure to have validated your email and try again Correct link: maps.djtechtools.com/mappings/9279

[@jiang2sk8]

What is waiting

[@djestrela2]

please clarify

[@DJActionVasquez]

@@djestrela2 Maybe he means, "what else is left to map?"

[@djestrela2]

​@@DJActionVasquez some ideas: - bring back loop active with shift+auto loop. - move beatjump from the loop into the (currently unused) search buttons. Maybe on the unused pads as well. - make a configurable sync button: either toggle (Traktor style) or phase correct (serato style) - make a way to adjust the IN and OUT positions of the loop just like CDJs (using the jog) - add a keyboard mode that replays the temporary cue (current implemented is key shift which does not stop the track) - add a padFX style for all macroFX and mixerFX (with shift+ pad). Imagine an "instant grat" button for every mixerFX, macroFX amd regular FX I have. This complements the current list of padFX with even more, on the locations you already memorized (because you are used to select them) what do you think?

[@djestrela2]

now implementing #1, #2, and #4

[@DJActionVasquez]

@@djestrela2 Yo creo que todo esto seria bacanisimo. Tal vez puedes hacer un video sobre el mapping de los FX. Muchas gracias. Aun que es mucho trabajo, me gusta hacer los mappings. Ahora mismo hice el mapping para un hercules inpulse 200. Le quite los "pad effect" y le puse hotcues 5 - 8.

[@rollerball398]

Amazing!!!!

[@djestrela2]

rollerball thanks!

[@luismarinrojas20]

link caido

[@djestrela2]

Luis Marin Rojas thanks for reporting It is working now That server is not 100% stable maps.djtechtools.com/mappings/9279

[@theserendipity_88]

🔥🔥🔥

[@djestrela2]

gosh, you were quick!!!

[@djestrela2]

use this mapping: maps.djtechtools.com/mappings/9222 request Jog screens here: serato.com/forum/discussion/1736390

[@DJ_PROMO_PR]

You are working on real software issues to satisfy real users, without making them spend money on new redundant and expensive hardware. This is why you don't work for NI and Pioneer.

[@djestrela2]

Thanks so much. What moves me is that some years ago, DJs could use any Software with any Hardware. This model is gone, so this mapping makes a small contribution for it.

[@onsite2406]

Pedro Estrela that’s why it was odd to me. I imported the settings file and verified everything was correct. It was, but I still had to go back and toggle this setting. I also notice on the channel 1 & 2 Traktor effects (using the beat fx knob), when switching from spiral to echo for example, the “on/off” button state is reversed. Off is on for spiral, on/off is normal and correct for reverb. Behavior is similar for a few other fx.

[@djestrela2]

Luis Morales weird indeed. Normal leds are easy to control from traktor, but the beat fx button has its own blinking state machine. I have to test that in a lot more detail to understand how to remote control it. Do mot hesitate making more bug reports

[@maiklotzmann9228]

Hey Pedro. Your mapping is very nice. How can I change the stettings in part 3 of this video, kzbin.info/www/bejne/nGO7hpuInZtkpNU Can you help me please. Thank you

[@djestrela2]

That is a great feedback viseo Sadly I just not have the time to change the mapping to address these comments