2019+ Ford Ranger Sway Bar Disconnects!! - First ever Install and Review

[@MT-xs4fu]

Gloves really help.

[@sixleggedinsect]

It would be great if you did a run with a ditch and actually measured with a ruler the difference in travel, making sure you are at exactly the same point in the ditch (could mark the grass).

[@downsouthexpeditions2956]

As soon as I can get to a place to do some more thorough testing I definitely will. The ditch was all I had at the time lol.

[@mr.eervianlesmana9263]

@@downsouthexpeditions2956 can this also be installed on the ford ranger px series? (actually the model is the same as yours although the year is different, only the difference is in the engine and transmision)

[@freedomisntfree_44]

Wonder if the new ranger will have them like the bronco

[@who-ge1gu]

Great review. I didn't know these existed yet.

[@downsouthexpeditions2956]

Neither did I! I searched for months on the Ranger forums and was able to get in contact with the manufacturer as soon as I found them. Super cool addition to the setup

[@OverlandPNW]

Very cool mod ! Nice job on the install video as well.

[@downsouthexpeditions2956]

Thanks man!

[@alanfernandez8448]

Thanks for making the video. Does it make any clunking sounds while it's connected? The bolts you torqued down look like they can move inside the hole. Thanks

[@downsouthexpeditions2956]

Thanks man and so far I have not heard any clunky or rattling sounds. They are very solid pieces

[@alanfernandez8448]

@@downsouthexpeditions2956 thanks, just ordered...thanks for saving on shipping!

[@downsouthexpeditions2956]

@@alanfernandez8448 thank you man! Hope you love them and make sure to comment what you think when you get them on and can test them yourself!

[@AlL-fw2cy]

Is that a Harbor Freight 1.3T jack? You should try out the 911motorsports off road mod!

[@MikesWorld1]

Great video. I don’t think I need these but it’s a nice option to consider in the future.

[@lowspeedhighdrag]

The link no longer works. Can't seem to find them anywhere online.

[@Alexsuniverse1]

Where do they sell this the link doesn’t work

[@darksideemt]

Did you measure and mark them compared to the stock ones you took off so your alignment isn't effected? You didn't mention that when you were installing and I'm new to all of this. thanks

[@baileymccormick7474]

Awesome video been looking for these for my truck I think I'll check them out thanks

[@chrisw3333]

Articulation ? Lol u beat me too it !! Very nice ! Looking hard into the front ARB locker .. arm and a leg for it though , gotta buy the compressor also 😢

[@downsouthexpeditions2956]

Oh yeah that cost adds up quickkkk

[@chrisw3333]

@@downsouthexpeditions2956 video I could tell some difference with the flex , think it’s worth the 200$ ? Just your honest opinion. Looking in the site now. Thanks brother !

[@downsouthexpeditions2956]

@@chrisw3333 the test I did wasn’t the best to display how much travel you gain out of removing the end links. When I get back on the trail I’ll make sure to do a better demonstration👍 if your not on stock suspension I would go ahead and remove the stock ones. Rides way better without them.

[@chrisw3333]

@@downsouthexpeditions2956 10/4 that be awesome , I’m on the same 3” Eibach as you. I haven’t added anything to the rear yet though. I did the full shock and coil over deal for like 650$. I also run the same grips , mine are just a 285/75/16 ...

[@downsouthexpeditions2956]

@@chrisw3333 your set then!

[@richie3182]

Can you put a new link for this swaybar disconnect

[@scottwright4540]

Couldn't find the site is the link correct

[@henrysanchez10]

Make a video on your suspension, I see you have eibach and I haven’t seen any videos on KZbin reviewing them

[@danielyoung7175]

I have the coil over Eibach's. I love them. I did have to send one of the shocks back, due to an improper top hat. I live only 1.5 hours from the Eibach factory, so I was able to have them switched out the same day I had trouble with the install... Once installed, I kept them at about 2.5" lift. I can go up to 3.5, but I did not. the ride stiffened up a bit on the front end, which I like. I would highly recommend the coil overs. I also added 33" BFG, and replaced the intrusion beams with the BDS for safety purpose. I see that this guy did not replace the intrusion beams, just cut them out... to each his own.

[@JustinLaNoue]

These don't seem to exist anymore, the website doesn't work at all.

[@ImLevelGaming]

Any ideas where i can get my hands on these or something similar ?

[@downsouthexpeditions2956]

check stage three performance, also just posting to a ranger facebook group will help find someone who is making them

[@HOLOCULT]

Hey do you run a locker? Your truck is just 4x4

[@downsouthexpeditions2956]

It has a rear locker but just regular 4x4 in the front

[@nickolashaustein]

How have these worked over time? Do you still use them?

[@tommymacleod8129]

What front bumper do you have?

[@nickworks2341]

Great video. Very informative.

[@Ryan-iy7cj]

So how are these holding up?

[@downsouthexpeditions2956]

The aluminum shaft and heim joints are in great shape. Ive had to replace two of the pins that keep the wing nuts from unscrewing. Not sure how they fell off but im sure it was user error. Also the roll pins used to keep the end links from unscrewing from the shaft have vibrated out but after replacing them and flattening the ends with a hammer so they cannot back out again ive never had a problem. considering how new the product is to the market and the price id still buy it over again!

[@Ryan-iy7cj]

@@downsouthexpeditions2956 sounds good! I just got my set today. Will be putting them on my Tremor soon. Thanks for the update!

[@furiangameclips]

haha "this is gonna hurt" said that a ton of times before

[@Novagunner]

i wish they made these for the older rangers

[@YtRando69]

Do you have your coilovers maxed out?

[@dad3562]

Let me know if you ever want to sell those please, or have contacts to the maker.

[@JonBecker81]

I know you can’t really get these anymore but did you still have your rear sway bar? I’ve been hearing more and more from people who just removed them permanently.

[@dad3562]

The rear has a sway bar?

[@the_real_d1pper500]

@@dad3562 yeah on the raptors

[@alexworld5272]

What’s the link

[@Notdb1gabe]

Great video 👌🏽👌🏽

[@jimmybrannan5457]

Oh Gay Bar!!! You aced it

[@downsouthexpeditions2956]

I figured you’d have one already?

[@jimmybrannan5457]

@@downsouthexpeditions2956 🤣🤣🤣You beat me to it

[@danatkinson6698]

The link doesn't work

[@downsouthexpeditions2956]

That’s weird. I’ll check it out

[@downsouthexpeditions2956]

squaretailmfg.square.site/

[@danatkinson6698]

@@downsouthexpeditions2956 that works and so does the discount code

[@YtRando69]

Apparently this place went out of business already 🤔

[@kasssap7]

Great video 👍🏼