2019 Honda Grom Build: Ep. 7 - 12x6 Supermesh Rear Fatty Kit Install

[@johnshaw2664]

Should come with the longer screw for front socket

[@jaimerodriguez1354]

You tighten chain with extension tool (slip in stretch adjuster spanner)

[@ricosuavecito3050]

That "whooo... *beat drops*" priceless

[@Steve_MP5]

rico suavecito 🤣🤣

[@warrenpeas]

that damn hub must cost a small fortune

[@joelsattentiontodetail665]

I'm thinking about taking about stab at fixing up the grom again. Thanks for the video

[@derricksanford4660]

Where did you buy the tire and rim?

[@Mu9enx]

Lol you have to adjust the stretch. You have to pull it back with the supplied wrench.

[@lidanoserra3934]

hello .... I would kindly ask you for information ...... the rear tire is 130/70 or 140/70? ...... I have seen another video where they even mount a 150.

[@Kemper_Fi]

How many links is that new chain?

[@jgarcia7354]

Anyone else feel sad when he said he didn't have another set of hands?...No friends my guy? I'll be your friend and you can use my hands as an extra set..

[@BIGB-TOWN]

Where did you pick up the kit and the wheels?

[@wilfredovalle5299]

What is the number of wide rear and front tires? I have a Honda Grom 125cc motor

[@nvrlose911]

Since the stretch bars are upside down and on the wrong sides, the axle is at the bottom instead of the top. Chain should work without the drop mount if the bars were swapped and axle was at the top.

[@osomxl]

Part of the reason you are having problems with the chain angle appears to be the upside down install of the extensions in the last video. I can’t tell if the adjusters can be swapped side to side but they are below the centerline of the swing arm and tightening them further pushes them down, away from the swing arm centerline. This also may cause interference with the rear brake caliper, where it will hit the swing arm. Try rotating the adjusters so they sit above the swing arm centerline instead of below.

[@Steve_MP5]

osomxl could be. I know very little about bikes. My first build here. When I lowered it in another video it seemed to correct the issue though.

[@bmxboi72]

cant find the fat tire kit on ruck shop. how much is it without the wheels?

[@mdyaacobramli6227]

Hi, can you share with me where can I get those fatty wheels set like your? I try search but fail to get 1. Really appreciate if anyone could help me. Thanks

[@hypeknocksville]

There’s a piece or derlin that usually sits on top of the swing arm to protect the rubbing. Once you starting moving your chain will tighten up homie. And your missing a bolt in your rear hugger

[@Deenuponhaqq]

Hey do you have a link for that Fatty kit ?

[@randylayhe8998]

wait why did you flip the front sprocket??

[@Steve_MP5]

So it would be in line with the rear.

[@KalchykDen]

Is that even safe to drive with a front sprocket like that?

[@santaklauzeofficial]

What size tires you running on your stretched fatty kit??

[@Yettee0201]

Gotta cut the music out during the video when you’re showing things

[@martingarcia1635]

what is the tire size??

[@UnkoB-jo]

I’m legit still waiting for an answer. Unless it’s the regular tire size and just stretched.

[@UnkoB-jo]

In the video it shows the tire size of 130/70-12. I screenshotted that for sure 😂

[@WEMFTai]

Finally found a Gromer near me!

[@Steve_MP5]

W.E.M.F Tai where you at??

[@WEMFTai]

Steve_MP5 West Chester

[@FaKeThrowback]

Videos are amazing yet the music in some parts is way to Loud.

[@vtecdpn100]

Hey so what was the reason you flipped the front sprocket? I know you said to line the chain up. But was there something you did differently than the ruck shop did on their demo video? There was no mention of the front sprocket mod. Thanks!

[@Steve_MP5]

vtecdpn100 unless they changed their video, I’m pretty positive it’s in there because that’s where I saw it, I think hahaha. If you don’t flip the front sprocket and put the bracket on the other side it sets too far in. With the wider tire the rear sprocket pokes out farther. They need to be in-line. If you go with a 12x7 fatty, they give you a whole new mounting bracket to push it out even further. 12x6 is less involved and less expensive. Partly why I did it. If I did it again I’d do a 12x7.

[@jimstenlund6017]

That little bit won’t matter with such a long chain, got a flipped XR650R sprocket on my XR650L, it does fine with a slight misalignment.

[@Lahemi347]

Chain link on the wrong way

[@TheErnestoq]

What's good my brother I appreciate the video very helpful....but I have one question did you use a m10 or m12 for the rear hub install??

[@corbinsmith2910]

It’s called tighten the chain not very hard

[@eduardoochoa9081]

Add the link to the fatty kit.

[@shawndoucet4751]

your'e strech kit is upside down making ur wheel Bolt/Axle lower also so basicly lowering ur rear wheel lower then stock position

[@TheReaperBaby1]

“Bent the frame no big deal , what are you gonna do “ .....boi......

[@Rick_Sanchez_C137_]

Ssssoooooo, can we assume you can’t wheelie with that Grom now?

[@michaelkeryger141]

Rick Sanchez C137 wheelies are super hard now 6 inch pop ups

[@clevelandjr623]

Did you need to get a longer rear brake line?

[@Steve_MP5]

James Parks no. If you watch the stretch video all you do is loosen the existing one and turn it. You have plenty of slack for a 6inch stretch

[@motorizedbicyclenation53cu90]

See I couldn’t do it I’d have to stretch the frame get longer forks bigger wheels different everything he’ll I’d have a different bike when I was done

[@rudykreinheder7920]

A vid about a fatty tire without a good view of the comparison from the rear. Weird.

[@beaureed2343]

Can i run 12×7s on this extention

[@Steve_MP5]

You can run 12x7 on a grom you just need the spacer kit for alignment on the sprocket most kits come with.

[@beaureed2343]

@@Steve_MP5 ok thanks

[@JavierMartinez-mm2en]

Turn up the music more so we can hear you 🤦🏻‍♂️

[@bmxboi72]

I have a 12 inch stretch but its custom

[@joereed7326]

Nice

[@xpanco]

Shittest kit....I’m fitting mine and had to do extra modifications Custom spacers/machine 5mm of the sprocket carrier and machine 4mm of the brake bracket so the wheel is in line ...

[@ronmendoza4916]

"Tired Of Problem After Problem"? Should have left the Grom the way it was built. Factory stock.

[@armdrop101]

Shits ghetto on the spacing cost way to much to ghetto rig it . For the price u pay better fit like a glove. Handy for 2 weeks after for the cash flow involved.

[@kylea7714]

Good videos but to much music when you’re talkin and explaining stuff

[@gokartsminibikesandmore9925]

Music unbearable tried watching just cant disappointing as not many people have install videos

[@Steve_MP5]

Dude. 😂. Mute it. I felt like it was boring either way nothing so I added music. If you can’t deal with the music to get whatever information from it, for free mind you, then that sounds like a personal problem. 🍻🤙🏻

[@SirXyloid]

the amount of tape and scaredness to not scratch anything is cringy

[@funnyfidgets3731]

What is the tire size that you use on the fatty wheel?