2019 MERCURY 3.5 OUTBOARD CONVERTED TO 5 HORSEPOWER

[@tristanvoros8580]

This video is awesome. I thought my 3.5 merc was toast. Every time I used it, it seemed to get worse. Last time, it left me in the middle of the lake. Got this carb (cheap one from amazon) for $45 and fixed my engine in less than hour. New gas, first pull. Sounds way better. I'm shocked. Can't wait to get back on the water - ALL thanks to this video. PS. Get a small hose clamp (worm gear) before starting. The OEM one won't fit around the fuel line due to the larger carb (you can see at 4:20 its not all the way up). I had the same issue but was able to slide an open worm gear through easily.

[@Mascotal]

So here is the thing..... The plastic prop is used so if you hit a object the prop will break off and not ruin the internal parts. Plastic props are cheap so carry extras on your trip. Also, the best mod you can do on that motor is to delete the fuel pump, plug the vacuum outlet, and let the fuel gravity feed to the carburetor. This will increase vacuum to the engine and make it run better with more power.

[@petermorse5442]

That's sweet. I fitted one of these carbs to my 3.5. It runs nothing like that. Fuel leaks out of the carby and it runs rough like a chaff cutter. Idle is all over the place. Will go back to the original carb and hope that works.

[@mmd-oh7lb]

@petermorse5442 hello , oh man you mean it's not work ?

[@StacySalmans]

Slick conversion. Can't wait to see the on-water review.

[@jim_dubhglas]

Watch out... My 3.5 merc had weak water output like that and I wondered it if was normal. Eventually, the impeller failed and my engine overheated so bad, it melted the oil filler cap right off, spewing oil everywhere inside and some of the plastic cap drizzled into the crankcase. It also melted a few parts on the shaft and mount area. I ordered Mercury parts from a local boat place which weren't ridiculously expensive, and a new impeller off Amazon. It's all back in order with water pissing out strong as it should, but I feel the motor just isn't as quick as it once was.

[@Manuel_Z_Kayaks]

When the jet flew over I was impressed with how it sounded! 😄 🤣 😂

[@joehastings1]

I was thinking the same.

[@alekshawkwobblermadeofwood6815]

Hi ! Great job, interesting set!!! Some time has already passed, please tell me how the motor works with such an improvement? How are things with gasoline consumption? Sincerely, Alex.

[@Pleipoy]

The 5 hp. carb is identical to 3.5 hp according to manufacturer, exept for minor changes in jets. The 6 hp. carb. Is bigger but have not tested the bigger by my self. The aluprop makes it possible to thin the blades which is next on the list.

[@jonathanspaulding6457]

Can't wait to see the on-water follow up!

[@the_old_standard]

the reason you can never find the on water follow ups is because these kits dont work. Justin over at RSB needs to stop hocking these things as 5 hp conversions. they are just chinese replacement carbs with a heavier more expensive 100 dollar aluminum prop.

[@rubenlozanomoses]

Great video, Thanks!!....please tell me how the motor works with such an improvement? I recently bought this motor and I want to upgrade.

[@the_old_standard]

I wanted this kit to work so bad but I purchased it and saw no difference what so ever and they dont allow returns after you install it. the carb from readysetboat ran worse than the original.

[@wartowne]

Same except it actually robbed speed from my set up and the engine ran like crap. I put the stock setup back on. Getting 10.6 mph with two people on a 12 ft John Boat.

[@lonesomelenny7606]

Great review. Where do you order the upgrade carburetor & prop?

[@scotteckert3892]

HI. Nice Video. Super helpful! I'm guessing that your tracker 1754 is over 1000 lbs. I would like to use this motor with the conversion as backup power for my 700 lb sailboat. Any thoughts?

[@robhanna4063]

I bought a mercury 3.5hp in 2012. I had always had a dead/stalling spot in the throttle that i have always had to skip over. I brought in in on warranty, they messed around with the carb a little, ultimately didn't fix the problem and told me thats just the way it is. Fast forward to 2023. I put a $35 carb. From amazon on it. No nore stalling. Nothing but smooth sailing! I wish i had known better back then. I put an aluminum prop on as well. Dont think it made a huge difference but its stronger. I didn't see this option until after I put new carb in but I can't believe how great it runs now. The carburetors they come with are trash

[@johnstavola3711]

@robhanna4063 Did your carb also boost the HP? Hows it working today? If you're still happy with it, you have the amazon link?

[@mmd-oh7lb]

Hello, Do these problems also exist in modern engines such as 2024?

[@craig5222]

@Robhanna I have the 2012 also and have the same damn issue. The thing will putt down the river all day long In gear if I’m creeping slowly. Once I get to bout 1/3 to 1/2 throttle it wants to bog down and stall. Sometimes I can get it up higher and “skip” the stall. Usually not tho and I end up riding miles back up river slow as hell

[@lilbbbbbbb]

That sucks man ​@@craig5222

[@SeeyouNavigator]

If the 2.5 HP is basically the same motor as the 3.5 HP, can it also be converted to 5 HP?

[@NinoSpinner]

Ma il carburatore da 5 hp cosa ha in più? Gli spilli diversi? O è più aperto a livello di entrata di aria? Hai constatato un consumo maggiore di benzina?

[@Freedom2219]

I think I seen you didn't put clamp all the way back uo te secure fuel line I could be wrong...cool video as always

[@CarolinaChrisOutdoors]

Heck yeah.... Purring like a kitten now! It was kinda funny when you first cranked it up... I was thinking “Man, it sounds like a jet” HA HA HA!!!! I was thinking about getting a small motor for my jon boat, but they are tough to get right now.

[@zefsemporiumofmadness5530]

did you have good customer service through them i order my kit 2 days ago and still don't have my receipt or any kind of notice that the purchase was made except for a bank statement

[@shawnmoore9714]

It's been awhile now. Did you notice any difference on the water?

[@leesweeting9316]

Hi looking to convert a 2020 tohatsu 3.5 to 5hp carb conversion will I need to change prop,boat is a 3.2 honwave will be two of us on it,thought I read that the 3.5 prop might be best to keep on as with give more low end power

[@chrisz.9974]

So I just picked up a 3.5 for $80! Previous owner said it was a friends who let it sit on his dingy with ethanol fuel. He just swapped the carb because he didn’t want to clean and adjust the carb. He’s saying it runs but it does when you rev it really high. Could it be it’s starving for fuel? Or is there like an over-rev safety or something on it?

[@801Outdoors]

Sounds like starving for fuel

[@chrisz.9974]

@@801Outdoors I’ll have to try tuning the carb. Do you have any tips or vids on tuning?

[@kenmackenzie9582]

Has 'thereadysetboat' conversion actually increased horsepower and does the engine's cooling system handle the increase?

[@801Outdoors]

definitely increased horsepower i and i haven't had any issues with overheating

[@johnnylong6289]

Most of these little outboards are all very similar throughout like 5 to 15 hp (Johnsons, Chryslers, whatever..) except for carb size. I dont think this will put undue stress on anything in this case. It's a minor increase in air/fuel mix and flow.

[@vladimirm5541]

i think new carburetor from 5 h or 6 your opinion?

[@ivanmarugg2139]

You forgot the clamp on the fuel hose going to the carburator.

[@vasilelazar9660]

E diferenta de viteza ?

[@сергейзеленкевич-ж3ю]

Здравствуйте. Скажите пожалуйста, а такой комплект можно установить на мотор Меркури 3.5, 2016 года выпуска? Где можно купить такой комплект?

[@milaadf]

Did you split the hose clamp to the top for the fuel line?

[@801Outdoors]

I did not

[@dmitriyivanov9854]

Hi bro, nice job! A question about the outbord- does it have an oilfilter? I cannot find on mine.

[@tbirdracefan]

no filter

[@johnnylong6289]

No but it's easy to change out and takes 10 ounces of outboard 10/30. A drain plug and a fill home like a mower.

[@randyshaffer7257]

Better put that clap back on the fuel line at the carb

[@801Outdoors]

I couldn’t get the clap over for nothing I’m gonna have to figure something out there thanks for watching

[@wiscowalleye7954]

I’m thinking of getting a 4hp for my scanoe but want it to double for a kicker on my 17ft lund. What kind of speed can you get out of yours and can you lock the motor in position so it doesn’t rotate. Thanks!

[@johnnylong6289]

Yes you can tighten down the steering to where it stays where you put it via a handle on the shaft. This 5hp carb and prop helps a bit (Ive done the same thing with the same motor.) It added a little something and removed a little hesitation when you hit the throttle. It had a spot where it bogged for a second that went away.

[@mikesigncarver3803]

What is that you have hooked on the front, looks like a mini trailer hitch ball

[@801Outdoors]

its to pair up with the big outboard

[@goldteeth5076]

Where can i find a ignition coil for a 4.0 mercury four stroke. Year 2002

[@801Outdoors]

that i dont know

[@woodchuckman1111]

Nicely done

[@801Outdoors]

Thanks for the visit

[@Xman6044]

how do you put an unline filter on a 2 stroke. unless its a screen

[@801Outdoors]

4 stroke

[@pcigra]

do you have a factory (3.5 hp) carburetor for sale?

[@grantsinclair4840]

You didn’t put your fuel line clip back on at the carb main feed going to want to grease the prop splines too or you will never get it off again

[@801Outdoors]

thanks

[@RUDYAKAHALIBU77]

Sweet diy

[@801Outdoors]

thanks

[@damingcai4881]

May I know where did you buy the metal prop? Thank you

[@801Outdoors]

www.readysetboat.com

[@brettkelly4575]

The 2.5ho that I own is the same motor can I go to 5hp

[@PM-qp5he]

i too have a 2.5 that looks the same as the 3.5. i also wonder if this kit will fit mien. i emailed the company and waiting to hear back. it might fit but i fear it might be too much for the 2.5. they also might not be the same. but i dont think anyone here will know

[@brettkelly4575]

@@PM-qp5he it's the exact same engine only difference is it rev like 500 rpm lower it's because of the carb so I cannot see any problem

[@tbirdracefan]

I have the 2.5. The 2.5 and 3.5 are exactly the same except for the carb. I put a carb on it that was advertised as fitting the 3.5, 4, and 5hp engines. The throttle blade end of the new carb was bigger than the 2.5. Stands to reason there would be a gain of hp. I am not however going to go any father out on the limb and claim it is now 5 hp.

[@davem4193]

​@@tbirdracefandid you see any performance improvement with that carburetor?

[@tbirdracefan]

@@davem4193 Technically, yes as the engine was not running when I bought it. The bore of the replacement carb was bigger though which allows for more are and fuel. I have only ran the engine a few times. I do feel that switching from a plastic prop to a metal prop is in order though.

[@bushpig8109]

Does this motor also start in gear? Have heard that there is no gear safety on those.

[@trav5205]

That’s correct it does

[@801Outdoors]

yes starts in gear

[@mrjayd]

I’m thinking of getting the 4hp so I can have the external gas tank option so will this conversion work with the 4hp motor also?

[@801Outdoors]

i dont know

[@frankmills5284]

My 3.5 has a little more water flow than that at idle. Not alot more though.

[@801Outdoors]

i have never had a good tell tell water flow out of this motor dont know what it is

[@motorikiller3150]

where i can buy a kit , can you put full adress

[@801Outdoors]

www.readysetboat.com

[@lyndonwebber1389]

Wear did you get the kit ?

[@801Outdoors]

www.readysetboat.com

[@carlitodidthat]

Can I do this with a 2.5hp?

[@801Outdoors]

I don't know of a kit

[@luca_tdn3240]

Needs new impeller

[@801Outdoors]

yes sir

[@baliramdas2999]

I see the conversion of Carbo n propeller of mercury 3.5 hp to 5 hp . Please refer where from I will be able to procure this 5 hp Carbo n propeller Thank you I am from India State Assam City Dibrugarh Pin 786003.

[@johnfresco5365]

I hate this little cooter scooter, Japanese junk, mfg has gone down worldwide. We are getting the junk