2019+ Ram 2500 LED Bed Lighting - The Build Episode 2 by Infotainment.com

[@Road2Offroad]

I purchased the oem ram light kit for my truck 2 years ago. Instructions wrong. I just made the wire switch and worked like a charm. My lights function as they should now 🙌🏻 thank you Infotainment for the quality installs and detailed instructions.

[@Infotainment_nav]

Thanks for sharing!

[@on4acres]

Damn this was far more complicated than I expected.

[@Infotainment_nav]

Yeah, it's a bit intricate. Technically not complicated, but intricate.

[@on4acres]

@@Infotainment_nav it was ok up until you had to start taking apart the dash.

[@Rickteg]

3 wires you don't even have to buy the kit to run 3 wires and don't use those posi taps so unprofessional always solder

[@ericsteele1678]

U can buy a bypass cable that’s way easier to install than that and bypass the gateway security module did it on my 22 ram 2500 to change the drl and fog light drop out

[@Infotainment_nav]

We've got you covered on a bypass harness: infotainment.com/shop/interior-accessories/wiring/c-intbyp/

[@gmunoz1073]

What the price on the led tail light with blind spot sensor

[@Infotainment_nav]

You might have to check with your local dealer or MOPAR supplier. We don't sell the BSM tail lights by themselves, but we do sell them in a blind spot upgrade that includes the harnesses, programmer, and mirrors. We do have a kit that doesn't include the mirrors, just in case you have specialty mirrors with 360 camera or something unique, and we provide the part number to the mirrors that you'd need to get on your own to retain special mirror options and gain blind spot monitoring.

[@TheSmiddy70]

I have a 22 Ram 2500 and the instructions with my OEM bed light kit say to connect tn/wt wire to C3 pin 17 in the fuse panel in engine compartment. Will I have any issues wiring to F6 like your saying to?

[@Infotainment_nav]

Where did you get the kit? Is it Mopar?

[@301tefal]

I have the same problem. Manual shows C3 pin 17. I get my kit from my local dealer. I own 22 ram 2500 6.7 cummins. Kit # k6862869ab. Should I connect like you did?

[@TheSmiddy70]

@@301tefal I took mine to dealer to finish connections and they said it needed to be connected to c3 pin 17. Not sure what issue if any it would cause the other way, but wasn’t worth the risk for me.

[@TheSmiddy70]

My dealer charged $125 to make connections and flash computer. It took them about 45 minutes for all.

[@311rigs]

Instructions show different way to connect wires. I have a 21 ram 2500

[@Infotainment_nav]

Contact support at 855-636-6287. They can help you with the installation.

[@rickrucker5042]

What do you do if your kit only has one wire ? Do you only hook up to pin 16 on G blue connector ?

[@Infotainment_nav]

I believe there should be 2 wires. Contact our live support team 855-636-6287

[@JorgeCastro-ui3pi]

Find somebody who isn’t going to whisper and talks clear to do the how to videos or at least up the quality on production because I can’t understand what the hell this guy is saying.