2019 Yamaha EX Deluxe with Stage 1 Kit+8400RPM Tune.

  Рет қаралды 9,737

NC Drone Flyer

NC Drone Flyer

2 жыл бұрын

2019 Yamaha EX Deluxe with Stage 1 Kit+8400RPM Tune.
I tuned my jetski to run on the Stage 1 Tune using the MaptunerX that I bought from RIVA Racing.
Here's a full list of upgrades to my jetski.
Upgrades to my jetski~
(Bought from Brewer Cycles)
~2020 Yamaha Ex Fixed Bow Mounted Storage Bag.
~2020 Yamaha Ex Fixed Stern Mounted Storage Bag.
~2020 Yamaha Secondary Upper Bow Mounted Storage Pouch.
~2020 Yamaha EX/FX Front Bow Cleats installed at Brewer Cycles Inc.
(Bought from Shorlock Marine)
~Shorlock Painted Gloss White Steering Jet Nozzle.
(Bought from RIVA Racing Watercraft Performance Parts Specialists)
~RIVA Racing MaptunerX ECU Reflash Computer Software.
~RIVA Racing Free Flow Exhaust System.
~RIVA Racing K&N Air Intake Filter.
~RIVA Racing ODI Rogue Lock-on Grips, 130MM.
~RIVA Racing Power Filter Air Intake kit.
~RIVA Racing Pro Adjustable Racing Sponsons.
~ RIVA Racing Ride Plate.
~RIVA Racing Solas Impeller (pitched at 12/17)
~RIVA Racing Water Intake Grate.
~RIVA Racing Yamaha EX Mirror Removal Block-off plates.

Пікірлер: 29
@videntemusic2465
@videntemusic2465 2 жыл бұрын
I have questions you flash with maptunerx you can put in 8400 but I have warranty is possible flash and put back to stock?
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
Yes, you can return to the factory tune. But I'm pretty sure the dealer could see you went into the computer. But I'm not sure. 🤔
@jetskiordie3448
@jetskiordie3448 2 жыл бұрын
@@NCDroneFlyer riva says that they dont se it but I know they have a tool that read your rpms
@EthanRose666yudodis666
@EthanRose666yudodis666 2 жыл бұрын
@@jetskiordie3448 that can come down to an “over rev” issue 🤪
@ryan1803
@ryan1803 2 жыл бұрын
I’m looking at getting the stage 1 kit for my exr, I currently hit 57mph gps with restrictor from intake manifold removed and restrictor from exhaust manifold and the riva free flow exhaust, I plan on going e85 does the solas prop improve traction vs the stock impeller?
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
Stainless steel is always better than the factory ones! 😁
@ryan1803
@ryan1803 2 жыл бұрын
@@NCDroneFlyer do you think I’ll get much improvement with the tune for top end or is it acceleration, I usually run against a vxr and always get him on acceleration but the top end is where he comes around.
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
@@ryan1803 For me it was pretty much acceleration. But the EXR might fare differently. I don't run the tune any more because it isn't much benefit for my EX. The EXR is perfect for the tune and if you run e85 you might reach 60mph.
@ryan1803
@ryan1803 2 жыл бұрын
@@NCDroneFlyer thanks for the info, if you get a chance remove the restrictor in the exhaust and intake manifold that’s where I gained the most I turn 8100 rpm stock.
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
@@ryan1803 I turn 8400rpm with the tune and 7650rpm without the tune before I hit the rev limiter.
@sandertalsma3245
@sandertalsma3245 Жыл бұрын
what size odi grips do you have I can't find the right size?
@NCDroneFlyer
@NCDroneFlyer 8 ай бұрын
I got mine from the Riva Racing site by narrowing it down to my Year, Make, and model. Much easier that way.
@dezzahayes6492
@dezzahayes6492 2 жыл бұрын
Hello, Are you happy with the results of the riva racing kit? I’ve also got a Yamaha ex and I’m looking for a bit of more acceleration, not so much more speed.
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
Oh yes, I'm very happy with everything I've done to it.
@dezzahayes6492
@dezzahayes6492 2 жыл бұрын
@@NCDroneFlyer thanks for the reply, I’ll have to checkout all your videos.
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
@Dezza Hayes I recommend the top loader Intake Grate, Power Filter kit, and tune as they improve acceleration and makes it run better for sure. The stainless steel Impeller will make the 2nd biggest impact other than a tune.
@sasha-103
@sasha-103 8 ай бұрын
Very good👍my friend, how much time Yamaha can run with water without damage of engine and shaft seal? 15, 30, 60 minutes?
@NCDroneFlyer
@NCDroneFlyer 8 ай бұрын
I only run it for a couple minutes at max. That's about it.
@videntemusic2465
@videntemusic2465 2 жыл бұрын
Hi hi bro what is you high speed mile right now with 8400 rpm ?
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
56mph right now at 8400
@videntemusic2465
@videntemusic2465 2 жыл бұрын
@@NCDroneFlyer you have Sola impela
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
@@videntemusic2465 yep the 12/17 stainless steel by Solas.
@videntemusic2465
@videntemusic2465 2 жыл бұрын
@@NCDroneFlyer ok am in 53 right now with all rivaracing rear plate ,sola 1217,exhaust, worx Racing air filter ,riva power intake next flash I want tosh 61
@NCDroneFlyer
@NCDroneFlyer 2 жыл бұрын
@@videntemusic2465 That's about what I've done to mine! NICE!
@puttingwarheadsonforeheads9872
@puttingwarheadsonforeheads9872 Ай бұрын
Why not just save and buy a vxr or gp1800
RIVA Stage 1+ tune Yam GP1800r SVHO
13:16
Watercraft Talk
Рет қаралды 16 М.
Happy 4th of July 😂
00:12
Alyssa's Ways
Рет қаралды 65 МЛН
Introduction to Yamaha EX Deluxe WaveRunners - Aquaventure Boat Club
13:01
Aquaventure Boat Club
Рет қаралды 67 М.
2023 Yamaha Jetblaster Stage 1 Kit
7:00
No Reverse Garage
Рет қаралды 3,1 М.
Niagara Falls on a Jetski (I nearly pooped my pants)
21:38
Lake Erie Vlogger
Рет қаралды 62 М.
Yamaha EX cold air intake installation
29:15
Joe of all trades
Рет қаралды 707
2023 Yamaha EX Build walk around
6:50
Watercraft Talk
Рет қаралды 4,3 М.