2020 Gravely Pro-Stance 32 Full Review

In this video I will walk you through the features and benefits of the 2020 Gravely Pro-Stance 32. We'll cut short grass, tall grass, test hillside stability, as well as do a complete walk around of the entire machine. There are so many great features on this machine, but there are a some that should be improved.
Like what your watching? Subscribe for more!
Just can't get enough of JC's Lawn Tips?
Follow me on Instagram where I post lots of pictures and videos reguarly!
/ jcslawntips

[@leroycoleman7827]

Thank you for a awesome review on the Gravely 36inch . I will be purchasing one very soon.

[@maxchi9]

Thanks for your video. I have one of this and happy with it so far

[@jimmydickson8854]

Very well though out mower love it push mowing is phicicaly draining in the heat very good for small back yards with narrow gates ,I’m going to buy one eventually, well done gravely

[@CraigsCuts]

Great video! The standing platform is way too bulky and very hard to use that pin, you’re spot on with that...also, the beginner bar setting is absolutely pointless 😂

[@darrensmowing9773]

Love it... great review.. thank you.. 😎👍

[@DoctorHenrysDinos]

Jared! Great video. Lots of good info. I with you on that foot pedal. I took out a residential gate with darn pedal. Other than that, this is my favorite machine. -Craig

[@dereksdiatribe]

Switch the foot pedal from the right side of the lever to the left side. Appears to be a simple bolt. 4:49

[@dworksmaintenance]

Really great review......

[@robertwilliams7842]

Great 👍 review wish you could Do one on it mulching leaves!!!!

[@CatchProAustralia]

Great review. Gravely is defs ahead of the curve with that deck pedal. Cannot believe every stand on manufacturer does not incorporate this.

[@javelinlandscaping4881]

Spartan does!

[@greenslawngarden7809]

Just ordered one. You guys got a catcher for it?

[@CatchProAustralia]

@@greenslawngarden7809 yes sure do.

[@awrlive]

@@CatchProAustralia Hi mate stander b vs gravely for catching? And overall for Aussie lawns. Thanks

[@logansimpson305]

Great video

[@iridemotorbikes]

Great walk through. Keep up the good work! New subscriber here.

[@jcslawntips]

Thank you, I appreciate it!

[@rodrigosanchez7799]

How much you get

[@joehill8752]

Well done 👏

[@jeremiahjorenby2275]

Stand-on manufacturers should add a hydraulic deck lift with a little pedal on the platform, I've run some Kubota zero turns with that system and it was sweet as

[@Coachplayer]

It’s all about the gates.

[@Draega007]

How wide is it? I know it says 32" cut but exmark has a 32" but it actually measures over 45", kinda defeats the purpose when most small gates are less than 45"

[@dgdservices9993]

Good review. I bought on in the spring and sold it within 5 hours. I have other older Gravley mowers for 6 years. I was disappointed in the 32”. Great review.

[@jcslawntips]

Thanks for the comment, what was the main reason for selling? Just curious

[@dgdservices9993]

Well lack of tie downs in the BACK of the machine is one thing. If make a 32” machine then make it 32” with the deflector up. I always like the removable so it doesn’t make the machine wider. Platform locking pin is dumb. We flipped the foot lever to the inside so it would stay 32” but wish it would lock out of the way. Top of the tower layout is not the normal user friendly like the older models. (Reminds me of the Scag). Bring back the trash bin and put all PTO, key, throttle, choke back above the throttle controls. Gas gauge sight hole is dumb. Rear tires are to narrow for hills and turning without grass skids. Love Gravley over all, but if they would address my dislikes I’d buy anther one to go with the other 5 mowers 48” & 36”

[@medusa210562]

What about going up the hill slower as a walk behind, as this machine allows it.

[@raula1113]

What happens when you decide to use the grass catcher, do you still need to carry wrenches to unbolt the grass deflector in order to use the basket like the previous pro-stance models? That was so annoying!!!

[@CarlosJuarez-ux3ve]

What is the total width size

[@dkbbeatz832]

Do the tires leave ruts in lawns being that there smaller

[@jcslawntips]

They can if you follow the same pattern regularly

[@Riverside_Lawns_n_Garden]

Why did y’all go with the 32? That seems really small for those big fields

[@dereksdiatribe]

It appears you can just unbolt the foot pedal and bolt it back in with the pedal on the left side of the lever instead of the right side. That would let the pedal be inside the "32 inch" foot print. Referring to 4:49

[@jcslawntips]

Yes you can however then the platform will not latch up in place

[@user-to1tx9mt1e]

I'm looking at a '21 with 70 hrs for $5500. Worth it still?

[@jcslawntips]

I think that’s a good price in today’s market a new one is probably pushing close to $8,000 if I had to guess. Maybe they’ll negotiate and you can get it for $5,000. You never know

[@NewVisionLCS]

I understand the fit and function, but part of me is saying, if the gate doesn't fit a 36", is it worth the headache?

[@jcslawntips]

I hear that and agree from my business perspective. There are some places down south where all the neighborhoods have 34 inch gates or smaller. This covers the market and gives people more sizes to choose from

[@NewVisionLCS]

@@jcslawntips I agree. I'm in Georgia, and alot of the homes have decent size backyards with tiny gates!

[@Thormana24]

Grate video but is that a floating deck?

[@jcslawntips]

yes it is

[@trucker_rob]

Why do you wear ear protection when cutting?

[@jcslawntips]

So I can still hear when I am older

[@robertwilliams7842]

I have this mower purchased it the 1st release day cost me $8,200 i Put $4,500 down finance the rest Through Sheffield.... PROS; Can climb hills 😊 Fits through 98 of my gates 😊 Fast as hell😊 Easy control 😊 Wonderful stand on platform😊 Cons; Doesn't cut low Worth a damn So low accounts are out!!!🤬 Will not mulch leaves or debris due to the deck doe's not go low 😡😡😡 Mines have mulch blades as A mulch kit and a quick clutch Still will not mulch a thing due to the deck is at a tilt will not cut Low... The very 1st cut was Wonderful The deck belt broke at end of cut The dealership re-adjust it and My mower never cut low again I have taken it back 3 times to be told the deck is adjusted correctly In fairness to Gravely my deck sat Flush with out tilt when I 1st got it The dealership in Memphis Tn Said the deck belt broke due to It needs the tilted pitch on this Video their deck is straight the Way mine's once was but not Anymore so if the dealership has the deck currently correct this Machine is flawed it can not cut low at all only high as mid range Cuts..... It ruts very easily but I expected That in honesty on slim tires to reduce it I step off mines when Turning to reduce weight and use It like a walk 🚶‍♂️ behind.... It can hold climb a hill but not cut Will slide it a 32inch stand on with Slim tires I did expect that... It doe's climb a hill to get to the Top of a flat surface if it is there But won't hold one cuting from a Side angle.... The locking pin to adjust the deck Is hell the foot assist helps big time In lifting the deck ... My only major gripe is the machine Can not cut low or mulch at all!!! In fairness this one is so is it my Dealership in Memphis Tn can Not properly adjust the deck Or is this Machine flawed? The one cut before the deck Belt was great but after the Dealership re-adjust it bye- Bye to everyone cuting low again ! This Machine is worth $6,500 In my opinion not the $8,200 I Paid in my opinion if I could do It over again I would purchase a Hustler 36inch stand on a Farris A scag Xmark... But it being 32inch getting in Small gates sold me if only Mines could cut as low as your Video does i would be happy With the purchase!

[@NewVisionLCS]

This is the exact reason why I'm looking at the Wright Intensity or JD 636m!

[@mrperfecto2758]

@@NewVisionLCS I have the same problem when I first purchase my mower, but yes you can cut low, you have to do a little work by changing the pin on the deck to low position, the deck comes high to cut from factory, but everything is possible, or call your nearest mower dealer they can adjusted for around $75 dollars so you can cut low, hope this help.

[@NewVisionLCS]

@@mrperfecto2758 👍🏼

[@josephcollins3447]

​@mrperfecto2758 does the adjusted lower level have to be real level lawn, so not to scalp cutting grass as short as a push mower? As I don't think it has a floating deck.

[@Axel-tk3tk]

I would cut off the foot pedal if I bought that or flip it if possible. Also take off the chute blocker, maybe add a nice leather one. If a 32in doesn't fit in the gate there is no point.

[@jcslawntips]

You can flip it but then the platform won't latch. But I hear you on that

[@robertwilliams7842]

On a hill that steep step off the Stand on walk it like a walk 🚶‍♂️ behind

[@jcslawntips]

You can, but depending on the terrain the machine would loose traction because the operators weight is not on the platform

[@robertwilliams7842]

I agree 👍I was thinking Of just riding to the top vs Cuting

[@mrperfecto2758]

No No No, please Gravely bring me back my previous model, this is a total mistake, I love my mower.

[@owenslawnmaintenance7593]

Hey

[@greggreen6636]

I hope pro stance better then their zero turns, i wasted my money on them. Horrible cut quality, deck height adjustment about 3” off, even adusted all the way up it still wont do 5”. Breaking springs, belt alignment horrible, discharge is a joke

[@jcslawntips]

Man sorry to hear that. I've had my pro stance 52 for a few years and its been great 700 hours and only had to replace one small part

[@prestonweitersjr.9460]

@@jcslawntips 6/7/21, Why would you want this over a [pro-turn] or other commercial-grade w/a seat? I just got a new consumer-grade ztx42...just right 4my property.

[@IMorgan-jd6rm]

Sharpen your blades every week

[@greggreen6636]

Mine are sharpened weekly , even tried about 5 different sets of blades

[@greggreen6636]

Now its parked, i switched to scag. Best thing i ever did

[@John_D2]

Only gravely would pull some crap like that on the pedal. Just like the older version burning the flap. What a joke.