2020 HARLEY DAVIDSON ROAD GLIDE S&S 475 CAM INSTALL! SOUNDS AMAZING!

[@TobyNorthEN]

Is cutting the pushrods the only way to change them out?

[@Holdon33]

No, you can take the tank off and the rocker boxes off , but it is more work. The S&S kit comes with adjustable push rods.

[@jessewoolley5421]

That was my question, but it was explained

[@TobyNorthEN]

@@Holdon33 ok. So the cutting method is just a way to get them out quicker/easier if you're not planning to sell or reuse the old pushrods. Got it. Thanks! Solid, informative video.

[@Holdon33]

@@TobyNorthEN If you are going to Stage 3 or stage 4 where you change pistons (big bore) or change heads(bigger Valves) then you pull all of that apart and you wont cut them.

[@TobyNorthEN]

@@Holdon33 THAT is incredibly helpful! Thanks!

[@vf12497439]

You glazed right past measuring the inside cam bearing depth. They don't just bottom like a twin cam. The cam thrust is set by bearing depth on a m8

[@qball007]

The difference between 2:46 and 13:30 minute marks is why I always go stage two. That aggressive WAP! sound just makes me happy, even on someone else's bike Love it.

[@ryanhundley8061]

That’s sounded wicked after that cam install!!! Great job guys!!!

[@MrSuzukiyamaha]

When it clicks, you’re good bud.

[@B702K]

Great video. I’m new to Harley coming from the sport bike world. Watching this install shows what an elegant design the Harley engine is.

[@IAmTheLittleTeaPot]

I think more that is made to be modified from factory. I came from a GSXR to a 2020 Low Rider S.. it started as 80 HP, with stage 2, 475 cam it now makes 126 HP. The factory motor is there to be beefed with when you buy the bike unless your learning.

[@disht2]

@@IAmTheLittleTeaPot seems that way doesn't it? First thing most people do with there Harley's is change the seat, bars, pipes, air cleaner, and maybe cams.

[@rsanchez5676]

So many small but important details left out: adjusting the pushrods, making sure the timing gears are perfectly aligned , the cam bearing depth , all very important!

[@jonbassett8023]

I'm going with the WOOD 22XE cam. Hauling bike to FuelMoto this winter... 2019 RK Special w/Arlen Ness monster sucker. V&H power duals, SVT Boneshakers & FP3

[@docholiday1034]

You will be happy you did. I have run the 475 the 22xx the 222 all the woods cams pull much better than SS 475. If your just a bar hopper thats want snotty cam 475 was good for that.... but nowhere near the pull of woods

[@ocglide2566]

This is the kit I want to put in my 19 RGS. Thanks for showing us the install.

[@gnastybrownbrown1571]

Looks nice----- Getting the same thing but I'm running a full rhinehart headers and slipons

[@ico0113]

That stage 2 sound awesome and I bet the performance is going to be outrageous but the pushrods needed to be chrome it give it the extra bling my opinion I would it see the pushrod install and the adjustment procedure but all in all great Video 👍

[@docholiday1034]

Installed ss cam plate,pump anf 475 with powervision... big improvement over stock. Was happy till SS pump broke. Scored my crank a bit so pissed me off. But after screwing around SS gave me a new pump. But i also had done same job with woods wm8 222 cam. So much more seat of the pants pull. I switched when i did my personal over again to the woods wm8 222. Big improvement. So 475 cam sounds good but nowhere near as much pull on the 1800-4800 range. No more 475

[@claudedevault6068]

Did this kit on my street glide I get complements all the time on how she sounds like a real Harley now lol Oh and when doing this or the other aftermarket kits they want 5 thousands or less of run out on the crank be sure to check how much your bike has because Harley allows for zero to twelve on the build from the factory. It's crazy to me but that's how there building them now.

[@Taino871]

Truly amazing work. Beautiful bike, You can hear the lower growl. I totally love the black rods

[@patrickkem689]

Damn, you guys do good work! Sounds amazing guys !

[@paulaxton72]

You need to flash tune that ASAP I personally would have done that before attempting to start the bike.

[@michiganborn8303]

I had that same bike, color scheme and everything. Had a stage 2 with a 447 cam, 2 into 1 exhaust with left side ghost pipe. I miss that bike, something bad. Kicking myself in the ass for letting the dealership sucker me into something else.

[@neilkropelnicki1790]

I like the Chrome Not into black nice bike Very nice HD niel AKA the Crock

[@hughsnyder891]

Really good looking bike . Nice paint job and with the new cam should run really nice .

[@ScottMitchell2]

The 114 has proven to be extremely 👍👍

[@danielwilliams5091]

Maybe a little bit different but the Tab Zombie pipes will make it sound very loud

[@neano62]

Love the black push rod covers. Didn't think I would, but , Nice!

[@trentdawg2832]

Love that paint scheme. .....badass bike, I'm guessing this voids any warranty on the bike?.....those lobes on that cam are like twice the size as the stocker.....this thing is gonna thump!!!

[@DOOWORKMOTORSPORTS]

Yes, this will void your factory warranty through Harley..

[@keystonedaytrip238]

That’s a beauty of a bike 🙂 My local dealership has the same marked down to $26 from $32. They damaged it in transport , right side of fairing

[@freedom6919741]

Best D&D video on you tube.

[@ridertrinity1617]

Hello. That's a nice bike. I have a question. My motorcycle is fltrx which was shipped in 22 years. I usually run from 1500 rpm to 3500 rpm. What kind of camera is right for me? 475? 465? Does 475 have a severe fever? I want to change the camera and feel the vibration and sound more shaky than the pure sound and vibration. Like an old bike. Is the 475c cam effective after 2500 rpm? Does the 465c cam have a good effect from 1500 rpm? Thank you for reading the question and please reply. Have a nice day.

[@derfskittlers6125]

Those exhaust sound nice. Deep and low.

[@whatstheproblem6606]

Man I wanted to see chic at the first of intro!! Lol sounds good man but can you get a cam that has a lotta thump?

[@KoHokCheung]

Hi very informative video. Did you change the valve springs when you installed your new cam? Thx

[@DOOWORKMOTORSPORTS]

No we did not.. Not necessary for this cam.

[@MrRW-dw9pu]

Great work! Bike looks and sounds awesome!

[@17jaw16]

Sounds a lot better. Look great blacked out

[@taps_1021]

Find a good dyno tuner in your area asap. A fuelmoto tune is just a starting point. A dyno session completes the job. 👍👍

[@DoucetteMichael]

Much better with all the black!!!!

[@roncoburn7771]

getting ready to do mine not sure if i will use s&s or zippers redshift cam your bike has a nice bark

[@andrewward4486]

Got my s&s 475 cam in the mail today..im on the fence with the push rods not sure to go black or reuse the stock ones

[@DOOWORKMOTORSPORTS]

Don't re-use the stock ones..

[@YoursInYeshua]

Dang, love it!!! So good!!! Mine is due for this cam in about a month and cannot wait!

[@anthonysayo6766]

Well?

[@YoursInYeshua]

@@anthonysayo6766 Love the cam! Awesome lope at idle and great power at 3000 to redline.

[@mikewagner4940]

I love the black push roads

[@ziapride]

Black is looking good, I love this bike keep building it.

[@petegonsor589]

With that cam it sounds bad ass. I got one question. Did you use your tuner to adjust things on it or did Harley do it? Reason I’m asking if you still have the format steps you used on the tuner?

[@DOOWORKMOTORSPORTS]

We got a remote tune from Fuel Moto and reflashed the bike with a dynojet powervision.

[@codybell87]

Been waiting on more Harley content! 🔥

[@pskemster]

Sounds like a whole different beast!

[@cadillacman8223]

sounds like a harley! just great, definitely louder👍does this cam fit a 107 m8?

[@DOOWORKMOTORSPORTS]

Yes it does!

[@cadillacman8223]

would i need to do other modifications? I've done stage 1 stuff, about to upgrade exhaust again and an fp3

[@Steve-qn8gn]

Did you check for run out on the shaft before installing the plac]te and pump?

[@DOOWORKMOTORSPORTS]

Yes.

[@michaeltaylor5550]

The black looks great

[@johndavies6152]

Great vid, beautiful looking bike. What seat do you have on it?

[@DOOWORKMOTORSPORTS]

CVO Seat from Harley..

[@CrawdaddyCustoms]

DOOWORK PRODUCTIONS Do you know the part number?

[@johndavies6152]

@@CrawdaddyCustoms Yes thanks 👍

[@mikeymixx7992]

Great, clean work!!... Would take my bike to you guys anytime!!

[@evil_musclemuscled3814]

As far as baggers goes Harley is where it's at . Sweet bike

[@steveo7767]

My Road Glide Special is all blacked out except for the covers and push rod covers..they are chrome, wth does Harley do that?? Lol

[@paulrevere4326]

I prefer chrome and the redshift cams.

[@jasonfrost2895]

You want to work on my bike ? 😂 You and your Dad should open a shop !

[@jonbassett8023]

Great video! Thanks for ur efforts!!

[@beastieboy3926]

How much more power does it make and at what cost?Give the figures.

[@mackdiesel6437]

Wow!! Nicely done boys.

[@86keen]

Those pipes have to go. Are they stock screaming eagle?

[@DOOWORKMOTORSPORTS]

No, they are D&D 2 into 1..

[@86keen]

DOOWORK PRODUCTIONS 2 into 1 would be head pipes, I was asking about the slip ons. Maybe it’s just how they sound over camera. Just seems quiet. Sick looking bike, but louder the better. I am running tab slip ons and hopefully Monday or Tuesday my bassanie 2x2 will come in. I basically want my neighbors to hate me. Typically how much does it cost 2 do a stage II

[@paulhewson4600]

I just did that build on my 107 SGS,,,,he will like it

[@soldier09r]

What a great install and sound clip video!!

[@billthomas710]

Did you have any issues removing the Tappet cover or tappet cuff bolts? I have hear that some of them have snapped during removal and had to be extracted from the case.

[@DOOWORKMOTORSPORTS]

Nope

[@2wheelwhit]

Did you say , torque the cam plate to 90 lbs. Seems high

[@DOOWORKMOTORSPORTS]

in./lbs.

[@phillipgilliland664]

Shonuff sounds great!!!

[@markdavis5980]

Why didn't you check the runout?

[@jerrybrown66]

What solo seat is that? Looks great.

[@DOOWORKMOTORSPORTS]

CVO seat from HD

[@timparsons7709]

Black tubes look great!

[@donnguyen698]

Good job guys

[@johnscott9844]

Should have done the redshift 468 cam!

[@tonydanzl]

The S&S 475 is actually pretty comparable to the Redshift 472.

[@colinallen68]

468 is undersized. It’s really meant for 107. I’m running the 468 on my stage 4 and it’s a little short. Runs like a beast still though 🤷🏾‍♂️

[@johnscott9844]

@@colinallen68 it works really well for a stage 2. Anymore than that I would go with the 472 !

[@tonymiller8286]

Excellent job guys, love the good video..

[@hexhog2551]

Will the d&d 2 into 1 exhaust void the factory warranty? Just got the 2020 rg and need some more sound.

[@tax905972]

just the tuner will void it if it's not the SE PRO STREET TUNER.

[@DOOWORKMOTORSPORTS]

No, unless you tune the bike, then you lose the warranty.

[@curtisladue7165]

Great Video! Question can you do a video on updating the infotainment system software? I’m Army and stationed in Europe. Bought my 2019 HD Road Glide about 4 months ago had 9 miles on it. None of the H-D Dealerships here will charge me about 1,500 💶 that converts to $1,777 USD😳 please help! Trying to get it to run on upgraded software with European maps. Currently all I have access to is radio and music via my phone 🙃 this has been my dream bike and not being able to enjoy it fully sucks. Respect your channel always adding recommended upgrades.

[@MrCRM2011]

Are the pipes two into one with a dummy pipe? Sounds great 👍🏾

[@Holdon33]

Yes

[@jeremyperez8753]

What was that little black block you used in between the gears to prevent them from moving?

[@theodoreko2700]

What was the adjustments on the push rods ? Didn’t you have to check end play on the cam?

[@michaelpasmore116]

My 2019 Road Glide 114 Special stock with new Vance & Hines 450 Torquer exhaust sounds much better. I’ve never been a fan of 2 into 1 exhaust.

[@TobyNorthEN]

Michael, I'm not challenging you, but the "better" sound is relevant to the listener. It depends on what the end goal is. Putting this 2020 and your 2019 on a dyno and seeing the results might make a huge difference. But I have a buddy who just bought a 2020 RG Limited and had the 450 Torquer put on and he loves the sound. I thought it sounded good too. I have a 2016 RG CVO Ultra with true dual Rhinehart Racing exhaust and headers and it sounds totally different from his.

[@michaelpasmore116]

All good points you make Toby.

[@killerb4202]

True duals for sound and looks....2-1 for powa!!!

[@CrawdaddyCustoms]

MoonshineHD did a good set of cam test videos. Part of the test was comparing a D&D billet category 2-1 pipe vs Fullsac 2-1-2. In most cases, the 2-1-2 made more power and torque- especially torque. Not all cases, but most cases.

[@SSCycleInc]

Well done guys!

[@DOOWORKMOTORSPORTS]

Thank you, you make a great product! Very satisfied!

[@docholiday1034]

DOOWORK PRODUCTIONS sometimes... 50 years using SS but some screw up recently that were very costly. Still use there product but check their quality control.... not what it used too be. Customer service not so good either...

[@wb4514]

You mentioned that the bike had a tune for stage 1, did you have to re-tune after the cam install ?

[@DOOWORKMOTORSPORTS]

Yes.

[@wb4514]

@@DOOWORKMOTORSPORTS Did you get a complete new tune that includes the S&S 475? From Fuel Moto ? Thanks.

[@DOOWORKMOTORSPORTS]

@@wb4514 Yes, thats correct

[@ronrogers3586]

Whose tuning did you use for the new cam?

[@DOOWORKMOTORSPORTS]

Fuel Moto

[@MrCRM2011]

How much difference would it be if the pipes weren’t two in to one? I’m looking for horsepower at 115 and torque around 120+. I plan on get a 2021 RGS

[@DOOWORKMOTORSPORTS]

The 2 into 1 pipes pick up about 10 more HP than a true dual..

[@InTheFleshInc]

You're a Michigander as well👍are you a Motorcycle Mechanic, just curious?

[@DOOWORKMOTORSPORTS]

No just do it for fun..

[@InTheFleshInc]

@@DOOWORKMOTORSPORTS, Cool deal, you know what you are doing...

[@danielmains4914]

Do you have to add some engine oil after opening up the cam chest?

[@DOOWORKMOTORSPORTS]

Yes.

[@aleckvassos6203]

How long did it take you to complete the job?

[@DOOWORKMOTORSPORTS]

About 5 hours..

[@larryford9732]

Did you lose your warranty with a non-Harley product install and also is the cam better than what Harley has?

[@DOOWORKMOTORSPORTS]

Yes, I lost the warranty as soon as we flashed it with a tune through fuel moto with the power vision when we did the stage 1 kit on this bike. So the warranty was already void when we did this install. And yes, the S&S Cam is better than the Cam harley offers with their kit. It sounds better and makes more HP...

[@larryford9732]

@@DOOWORKMOTORSPORTS I have a stage 2 on my 18 Street Glide and my friend has same bike with just a slip on and seems like he can can pull just as hard as my bike. I never had mine dynoed but from seat of the pants it doesn't feel 20hp stronger like its supposed to

[@SuperSnipehunter]

What tuner did you use and did you dyno tune it?

[@DOOWORKMOTORSPORTS]

Dyno Jet Power Vision, and no we did not dyno tune it. We received a tune from Fuel Moto and flashed it. Bike runs great!

[@marcmo7138]

90 ft lbs on a small bolt? maybe 90" pounds

[@__Gw]

I'm a simple man, I see a blonde on a bike I click.

[@dump3deg6]

I clicked because of panty line.

[@chevyandrews1419]

I have the same kit but not sure how to make push rod adjustments

[@nadovidaich2364]

Great job and thanks for posting!

[@mistajones315]

What is that arlen ness throttle body? Or is it just a badge you put in there?

[@DOOWORKMOTORSPORTS]

It was from an arlen ness air cleaner, it comes with that faceplate to screw on to your throttle body.

[@RoleA420]

Its the lobe of the camshaft why you can't spin the push rod not compression ;)

[@timbledsoe6737]

When did the cam go in lol

[@Hooijnbvn]

Like the chrome push rods covers much better. Doing the same install however going with the Zipper’s Redshift 468. No need to change out the oil pump on the 2020.

[@bigboy-ky3mx]

heard the 472 better

[@bjwebb2429]

Just got the same done to mine don’t know what cam was used though I have a road rage pipe though (17 road glide)

[@PaulOnTheRun]

Link is gone to the tappet covers.

[@michaelscott7482]

Sexy Bike! When installing the cam bearing, did you bottom it out or did you seat the bearing at a specific depth?

[@Holdon33]

Bottomed it out but made sure it was the same depth as the stock one.

[@timdavis8154]

How long was the total job? How adjustment did you do to the pushrods?

[@DOOWORKMOTORSPORTS]

I would say a solid 4-5 hours for install..

[@rolandb.campos4535]

Hey what brand and sizes of torch wrenches your using??

[@MrDhender13]

Nice looking scoot!

[@ccollins9981]

It'll sound completely different after you run the Auto-Tune function on the power vision for three or four rides and then save it to the map

[@richardsak887]

Auto-tune basic is pretty useless outside maybe a Stage 1 due to the lack of wide band sensors. Either add the Target Tune or dyno tune it.

[@GoodGuysCarry]

Wow! Great job on the video and the installation!!! And the black pushrods look great too! 😁👏💪

[@TommyRogersAlabama]

Did you have to run a Dynotune on it after the cam??

[@DOOWORKMOTORSPORTS]

No, I got a canned tune from Fuel Moto..

[@Paul-st2wv]

Do they making a gear drive for these yet?

[@tobpitbull]

You didn’t put a tune in this? I find it hard to believe that you swapped out the original cam for that cam without programming the tuner for the new cam?

[@DOOWORKMOTORSPORTS]

Yes, we tuned it with a power vision. We got a remote tune from Fuel Moto.. Bike rocks!

[@pistolpete6321]

Amazing! Great video!