2020 raptor 700 adding a Hotcams 3 BIG Hp GAIN!

Cuervo ATV Raptor 700 specialists
951-743-6328 [e-mail]
/ cuervoatv
www.ebay.com/u... Cuervo Racing Raptor 700 specialists
951-743-6328 [e-mail]
m.facebook.com...

[@locustltz400]

Most underrated ATV youtube channel out there. This man speaks and shows facts. No BS #'s no BS advice. Straight up and humble. I appreciate what you do for the ATV community Daniel.

[@MrCuervoRacing]

Thank you very much!

[@tedbear6012]

@@MrCuervoRacing do the duals make power over a single

[@Diebog]

Totally agree! He is great guy

[@graysquirreltreeservice7299]

Love it fabulous information 👌 🙌🙌

[@TerrellSpivey]

Man! Sweet gains!! Love the dual exhaust look on a bike!

[@ToyotatechDK]

Crazy too see how the tires expanded

[@shaunnicholson3854]

What would it be adding a high comp piston

[@Caseycallender]

Great video. I purchased a map from yli guys awhile back, would like to buy a cam now. Im wondering if you reccomend the springs with these pr if the stock springs still work fine. Also Where do i need tk go to buy, dont see it on the site or ebay. Thanks

[@ronjeremy1796]

Whats the difference in sound on the monster shorty vs monster standard?

[@thebishop5525]

What’s the difference between the 3 stages? Do they all just drop in a standard engine without additional mods? I keep reading people saying you need stronger springs for stage 3

[@withlinbarhm760]

Can I run a stage 3 hot cam with just the big 3? And will I lose low end power?

[@5221982]

Hey Dan , thanks for all your content and help. The map I got from you for my 2020 is great. I was going to get it dynoed but I heard it’s better to do it during the warmer weather months. Considering I don’t want to do any boring and I want to be as safe as possible, how much gain will I get if I add the stage 2 to my big 3(monster exhaust, FCIntake,PCV) and is it worth it? Style of riding is trails and hills, no dragging. Thanks again for all your knowledge! Happy holidays!

[@pw383426]

Daniel's the Raptor man. Wait till he gets to the big boy stuff

[@sixx6sixx107]

Do you have 100hp 2020 raptor vid anywhere? These aren't big numbers compared to the 2stroke banshee builds I'm used to being around. I have a 2020 myself I want to make anywhere from 80-100hp.

[@ryankooima7603]

If you add a plus 3 thottle body will that add anymore gains or make more low end gains ?

[@thomascreamer3202]

What we octane 91 ? I’m looking into the big three myself

[@Stutzvideo]

Good videos. I can't get over the rpm's they spin for that long of a stroke.

[@mikewilson1799]

Hey Daniel me and the wife are the ones who picked up the monster intake at the shop a few weeks ago and I have a couple of questions.First what a great service for those of us trying to decide how to improve performance on our Raptors very nice work.My first question is would the monster intake show similar gains with the cam/controller and exhaust?If I wanted to have the add ons shown in this video installed at your shop what is your schedule like ?Thanks.

[@MrCuervoRacing]

yes big gains still though peak will be down some. give me a call monday to discuss

[@mikewilson1799]

Will do.Thanks.

[@FREEDOMSYNDICATEOFFICIAL]

If I'm already tuned with the PCV for the big three if I add the hot cam stage 2 will I need to retune it?

[@austindenman9929]

yes

[@FREEDOMSYNDICATEOFFICIAL]

@@austindenman9929 thanks!

[@danielbunk8611]

What kind of numbers do you think this combo would make in an 06-14 with the lower compression ratio?

[@edwardseaton4492]

you recommend cam changes like that or would you typically suggest a spring up grade too?? how is durability affected??

[@garvensgarage8903]

Is this with a stock head and stock piston?

[@nahuelsanchez4081]

Just a question.... Make this modification on the quad, "stock", represent some kind of disadvantage? reduce motor life? Is any premature damage? thanks!

[@ANDREAPEREZ-vm9cg]

NOT AT ALL

[@kdcustoms1272]

do you know how much of a difference a 660 would have with a stage 2 or 3 hot cam?

[@goldenboygq9]

Hey Mr cuervo I know the channel is mostly raptors but I'm looking at stage 2 cams for the yfz450r are they worth it? Will they effect the reliability on the quad? It already has the big 3

[@goldenboygq9]

Do the cams make the idle change like a car?

[@wezos20]

Not really since what makes the noise to change is the timing in between cylinders

[@wezos20]

It will sound different but not a chopping noise

[@jpalumbo98]

I have the exact same big three setup in this video. Just purchased the hot cam 3. My question is do I need to adjust my fuel map for this modification? Thank you

[@MrCuervoRacing]

Yes. Every mod. Email me all the info to [e-mail] cost is 25$

[@jimwillis2698]

How can I got my quad dialed in by you?

[@piotrtomaszek5316]

Have you ever used WEB cams if so is there any benefits. Thanks

[@MrCuervoRacing]

We use Web cams for all our +1 and bigger heads

[@erichnitz1]

Can you create/sell a tune, CDI and stage 3 hot cam for a 07 700 with DMC dual exhaust and fuel customs intake? Rest of the motor is stock... thx!

[@MrCuervoRacing]

Yes we have mapping for you. Email me [e-mail]

[@gotime1236]

Where these the SHORTY exhaust?? And will you ever do a comparison of these vs the "In Frame" Megahurts Monster Exhaust??

[@MrCuervoRacing]

these are the standard length

[@ElijahWash]

Should show stock dyno run too

[@subshooting8414]

I agree.

[@jacobtapanes8244]

What’s the difference between the old and the new style of empire exhuast

[@MrCuervoRacing]

I dont have the old set to test.

[@jacobtapanes8244]

MrCuervoRacing Do you know if they were just trying a new look for the mufflers or is it a performance thing?

[@MrCuervoRacing]

@@jacobtapanes8244 i believe the change was mufflers style only.

[@4G63FORLIFE]

now what if you add a ported throttle body to that setup?

[@ANDREAPEREZ-vm9cg]

ADDS 2HP

[@yxiscatti]

Massive HP gain! Im planning on change my cam, I just have the Big 3. Would you recommend HotCam 3 for a trails bike? ot its better a HotCam 2? I will really appreciate your opinion. Thank you very much.

[@MrCuervoRacing]

15+ motor has enough compression to go straight to Hc3

[@kevinvandusen3777]

I do the odd xc and some Gncc races on my 17 700 and the HCIII with the big 3 works awesome on trails. You can still lugg it in 3rd and in the open field sections just open it up...pulls insane and keeps pulling..Massive upgrade in power for the $$$ like Daniel says in this vid. Great job btw on putting these up . Cuervo Racing Rocks for us 700 lovers!!

[@yxiscatti]

@@MrCuervoRacing Thank you very much for the quick and acurate reply. As I said, I have the big 3 and my intake is the Prodesign Foam air filter and billet intake (my trails are very muddy and river crossing), It would worth the money to put a bored +3 throtle body with the HC3? since the intake its much smaller than the FCI or the +3TB dont do much with the prodesign intake kit? Thank you very much, its helps me a lot to decide what is best for me (and many other too for sure)

[@yxiscatti]

​@@kevinvandusen3777 thank you for shareing your experience! its very valuable for me since I ride very similar trails as you.

[@MrCuervoRacing]

@@yxiscatti +3 tb works great regardless of fci or predesign intake.

[@raphy700r4]

Would the gains be higher on a single exhaust 15+ and can the HC3 drop in without needing heavy duty valve springs

[@MrCuervoRacing]

Drop in. No springs. The monster exhaust shows the same power

[@crispincurtis8585]

What's stock output?

[@fearoshima666]

46hp

[@Fuel_injected_dreams]

Awesome!

[@subshooting8414]

Wow that's a big gain. What exhaust do you plan to test with the hot cam next?

[@MrCuervoRacing]

Monster shorty . And Dasa

[@ABModsBlevinsTuning]

@@MrCuervoRacing Monster exhaust next please! I have the standard can though as you know. :)

[@khapin1836]

Все ли я делаю правильно с моим Raptor 700????? Посмотри видео на моем канале