Turbo Hayabusa Raptor 700 Assembly and First Ride!

First Drive on the turbo'd Hayabusa Raptor! I got my raptor all assembled and powdercoated. This thing will be pushing north of 250hp
➥ 🔥MERCH: tinyurl.com/w3a947kp
➥MY WELDERS: usaweld.com/?ref=hvpoab1dg65
➥ CUT OFF WHEELS (Code: VASILY 10) tinyurl.com/h44bzwrd
➥ EVOLUTION Power tools (Code: Vasily5) tinyurl.com/3j5kt4pm
➥LASER CUTTING SERVICE: bit.ly/vasilybuilds
➥PATREON: bit.ly/47gB9Pa
➥ SECOND channel: tinyurl.com/yw8csmw8
➥ PAYPAL: tinyurl.com/3vck3jnx
➥ INSTAGRAM: tinyurl.com/yvaujywh
➥ 🎵 Music: tinyurl.com/zze5jz4n
For all inquires email me vasily1fab[at]gmail.com

[@_UncleBo_]

Hell yeah dude it's these type of builds that set you apart from other channels for sure! Definitely one of my favorite build channels!!

[@AereoxxOp]

Hell of a build, i think its pretty dangerous too xDD

[@santaclause2875]

Wow, Vasily, you've outdone yourself on this build!!! Good God, you have talent that sooner or later will be recognized and you WILL be rewarded BIGLY. And your choice of music in this episode, from start to finish, is fricken awesome, I might add. And, God bless you too!

[@VasilyBuilds]

Thanks!

[@razazaggazow362]

@@VasilyBuildsHey what’s up. This is great content. I only see the euro guys making these kind of builds. How much would something like this cost? Or even just a motor swap itself?

[@hunterbulliard3265]

Your going to want to put a oil scavenge pump on the return line of that turbo, being that the drain goes to the Lowest part of the pan It will keep that hose full and will smoke the seals out of the turbo, SAE outlaw performance makes one specifically for turbo busa motors, and they’re not too pricey

[@HandDriven]

Hell yeah! Love the way you’re n it afraid to critique your own work, then cut out and redo it. Awesome build

[@jamesmikesell5458]

This is hands down the baddest quad I have ever seen.

[@Derkiesmefpipe]

I was pushing 120hp on my 09 Raptor with a mild cam, +3 TB, +2 valves and a 15psi D9 kit. Cracked the case, but just bought an aluminum block that we're gonna throw dual turbskies on. They're a blast.

[@kindnuguz]

Dang you've been busy Well done

[@richardbrady2818]

Been following for a few yrs now, this gotta be one of the best, come a long way

[@joewatlington1595]

Hey bud, just wanted to say awesome job. Looks like it's gonna be tons of fun. As a welder for over 20 years and a fabricator for longer than that, one thing you can do on those joints you welded that your worrying about them cracking, sleeve those joints with some heavy wall tubing, pipe, or even rounds stock, and it will be MOREEEEEEE than stout enough to hold up and you don't have to add extra gussetts or unneeded pipe. Especially in those hard to reach places. Just some food for thought.

[@1979augistine]

Damn this build is looking absolutely awesome well done . Your fabrication skills have grown immensely excellent job my man !

[@RandysRides]

That thing's awesome. I'm impressed.

[@Neel-xe1po]

That engine case is going to break where you tapped the holes. There is a reason motor mount bolts from factory go all the way through

[@lead5s]

man your welding skills are unreal

[@benmurphy9328]

Your skills have come a long way mate, this project is next level

[@jasongodin7165]

Nice i built a sand racer once , took a xr650L and big bored it into a 400ex frame, light and powerfull, made my own extended swing arm out of DOM steel , used a 91 piston because over that is dieseling, I never tig welded before nice job, when you place a turbo its best to leave motor stock so it lasts, Il give you a trick, use auto motive oil the clutch will not slip when motor is warm

[@willaimhalford4980]

Can’t believe you haven’t broken a million subscribers yet bro your seriously one of the best fabricators on this app 💪

[@chathamguy1able]

i like how you keep it with the stock look -----great job --looks like a fun and fast ride --- great video like always

[@TrevorDennis100]

I'm not so sure about using those drain plugs in aluminium. Could you bottom out and loctite studs in the holes for maximum thread contact? If you want to keep it looking good, use stainless dome head nuts (aka acorn nuts). You can buff them up to look like chrome. With the power that engine produces, there are going to be substantial shear force on those mounts, and I would definitely worry that the aluminium threads will eventually fail. I mean it's not like you are going to take it easy with that thing.😉

[@JonWilliams-tl4uv]

Right on, great job, I like how the turbo is mounted in a perfect location plan cause, the turbo is a great mod .

[@MrGlidn07]

You have come along ways, great builds keep it up

[@LordHolley]

That quad is looking amazing! congratulations, just my opinion, but it's the best project of yours so far. I look forward to seeing you ripping that thing at WOT.

[@mastercricket7626]

Good God bro ... this this is radical af ... mad respect to the build bro .. peace and love, keep it rad, stay safe, and build on. .l8z bro and keep having fun

[@leroygrrillajames9335]

Top of the morning ! Friday inspiration!

[@ChanseMartin222]

Soo sick!! Can’t wait to hear you string it out! Great job!

[@SlapoutGamingYT]

YESSSS!!! IVE BEEN WAITING FOR THIS VIDEOOOO

[@smenginemech]

Man dude great quad build you really do a perfect job

[@MrYahoo74]

Awesome job Vasily !

[@melvinrawlings1457]

New subscriber here. Awesome video and much love to ya from Maryland❤❤❤

[@Maarlooonnn]

So cool! Really compact build, I love it 💯

[@camerontaylor2076]

had the same back tires on my raptor and love them went everywhere i wanted to go love the build

[@shark11175]

LEGENDARY BUILD BROTHER

[@joeymurray93]

Wow bro amazing work take that thing to glamis this upcoming season that thing belongs out there !

[@user-ob2np7vt9t]

Nice execution of a plan bro. It's nice work

[@tristan_andrade]

Finally❤ Love this build

[@kennynelson2269]

It turned out wicked awesome man.. its gonna freaking rip

[@Blanch89]

SICK!!!! and 24min vid too! love t! keep it UP

[@volvogt21]

Airbag vest too mate. Want to keeping watching your builds for many years to come

[@donovanwhite2244]

Well done! Very impressive!

[@heneken67]

Really liked your direction with thjs build...

[@dailyfilmfix469]

If it were me, I'd put a bump stop on the swing arm just for peace of mind to protect the gas tank from rupturing and mock up a skid plate for the bottom of the engine since it sits lower than the frame. As for the turbo, maybe a front bumper with a cage to keep debris from getting wedged inside as well as protection from accidental impacts. It's probably overkill, but the power and speed this death machine possesses, any extra safeguards can't hurt! LOL!! This build is epic! Love it!

[@FZ09Rdr]

Brother is ripping a legit rocket in his crocs, mad respect.

[@richardsmiths518]

The best bike builder on KZbin.. fact

[@omarpadilla7674]

I want to see more content. I love all the builds!! Hope to be able to do half of you do one day

[@iapologizeinadvance4812]

You sir are a special kind of crazy and I freakin love it!! Got some mad skills too!!

[@EZE6_4166]

It's kinds refreshing that you posted a longer video this time.👍🏼😁

[@KaseysYouTubeChannel]

INCREDIBLE BRO!!!!

[@FastLaneLyfe]

Bro got the broccoli 🥦 cut!! 😂😂

[@shephusted2714]

lots of good fab work here - excellent

[@lyndonhamby7432]

Awesome job 👍🏻👍🏻🇺🇸

[@user-wd3he2ie5b]

Love your videos ❤‼️

[@Tennesseemountainhomestead]

Yes, sir you do some nice work no doubt about it! That thing is going to be totally insane with that much horsepower😅

[@leeberry3155]

Sounds mint, looks mint ,it is mint,great job bro ,air vest as well wouldn’t harm any ,you may need a parachute lol,it’s gona be flying ,😎😎

[@hecwashere610]

Sharp bro 😎💪🏽🔥😊

[@jethrox827]

On the sand would be the go 👍

[@Mac181]

Good shit bro you do good work

[@That1E_K1129]

That Iroc Z in that shop was CLEEAANNNNN!!

[@Motolantz]

You're the man bro

[@ralphhondaman]

Sweet build. I can see that oil return for the turbo being a problem possibly.

[@18wheeler77]

10:51 nice IROC! I had one exactly like it. Same color. Mine was an 88! I miss it terribly!

[@27Zangle]

I had a silver 85 Iroc. Great car, tons of fun until my wife in her minivan wanted to race 🙂

[@user-bi3gk6kd7s]

You should get together with Grind hard pluming

[@MaNNeRz91]

The invisible mask the powder coat guy was wearing was awesome

[@DarrenMartin-bw8zi]

FreeDUMB!! 😂😂

[@brianammons6331]

Badass! Looking awsome man

[@Zwarte-Piet]

Nice Job, I did a R1 swap with the 660 frame

[@bobmanzi7712]

great stuff thanks

[@davidowen888]

SICK !

[@der_schlosser4488]

nice job. grettings from germany =)

[@adamlambert3892]

Awesome job

[@sgt.railgungaming1793]

Been watching since the twing engine go kart, shit tuff

[@ridebecauseucan1944]

Awesome build just hope someone can ride it.

[@WShedd]

Yes Vas!

[@jg752]

those drain plugs snap right out when u give at good gas one time with a quick clutch🤣🤣 nice build tho

[@christophertibbetts2458]

Dude, that’s sick as fuck bro. Can’t wait to see it 100% done and dialed in.

[@ManiacRacing]

This is batshit crazy. I LOVE it! Just be careful not to backflip it at 120mph!

[@mercadolibre5976]

This quad is sick frr😈😈

[@Justgonnasendit88]

Fr

[@andyshaw8334]

Bad boy absolutely awsome ❤❤❤❤

[@Mad-Duk_Machine_Werkes]

I like the front view, where you can see the ugly dirty, muddy and rusty A-arms with rattle can blue on top and bare stock dirt on bottom- TOP BUILD!

[@backseatdriver4833]

Very nice work

[@sunnyjkelley]

Sorry for being late to the party. Great Channel!

[@justincurry2907]

Few changes . Tie that front end down or get racing struts, and put a 240mph gear set on that thing so it won't be so aggressive with that boost and 1300 engine

[@tonyedwards892]

Great job from Wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿 lotto win I'll be in touch to have one built for me 😃

[@blackdog7275]

A fantastic build, you have come so far. Make sure you make lots videos ripping on that beast !!!! There's a huge difference in buying something like that or building it. You are the real deal!!! 💪🦾

[@cadecarp11]

The custom powersports goat.

[@christianhunt7382]

In the world of fabrication wverythings just temporary. What is this today, can be that tomorrow! Nice video kid!

[@DOINKS-R-USS]

Awesome flying to the moon 🌙😅

[@joeyholthusen6495]

Nice build, looks heavy though. I'm betting it's fun. Curious about a Maico 700 2-stroke engine in a atv frame.

[@Frankie--da-fixer]

Thats a Monster right there:-)

[@ethanwhite1974]

so sick

[@murk1352]

You got put some blinkers on it & register it, so you can rip it on the streets legally! Came out real nice…..✌🏻💯🔥

[@WhatAboutU.S.]

Nice work dude, that’s sick! You should invest in a tungsten sharpener if you haven’t already. It makes a WORLD of difference in your weld quality. Not saying yours is bad just trying to help a fellow fabricator out.

[@user-np6iq1og4z]

Крутой байк !!! Сними ролик когда закончишь строить atb

[@titanicfilmsbymark]

Hello, awesome video. I am actually in Adamsville, TN where is your powercoater located in TN? Blessings

[@Axels107]

Tutorial: "How to speedrun to crave"

[@edwardweisenburg6585]

Niiiiccceee ❤

[@bikers_itch]

Vasily bro you need to STOP, I still have to complete that buggy🔥🔥🔥

[@C-24-Brandan]

Should powdercoat those wheels or get black beadlocks with better tires & may want to upgrade the suspension for extra weight and power .... other than that it's a really cool build!

[@cobrasvt347]

I'd fall asleep welding at that frequency. 🙃

[@joelboutier1736]

holy crap that's awesome. don''t die on it

[@Trent28888]

When ya weldin with AC turn up ya frequency,apart from the fact it sounds alot better ya also get better welds

[@supermotofeann]

Hey, what’s up brother? Don’t forget to put an oil stricter in for the turbo or are you gonna blow it up just saying love the build. Can’t wait for the next video.

[@greggory448]

Help this guy. We wanna get a him out of them Crocs.😮 into some yeah dudes 😂

[@santaclause2875]

Crocs are timeless and cool. I had a pair of Hey Dudes, and they were like wearing cardboard on my feet. So cheap and flimsy, but not cheap to buy!