2020 silverado 2in lowering shackle (Beltech 6416)

[@mikekirk5052]

Thanks for the detailed video. It helped me with my install - especially the lifting of the leaf springs to get the top bolt out and using a 10mm socket to turn the bolt while holding the nut with the wrench(13/16" I believe).

[@joshshuza]

That’s awesome. Glad it helped. 👍🏼

[@justinhood3043]

Where do u jack it to get pressure off leaf spring

[@209Stretch]

The pumpkin aka the rear differential.

[@bordelonchris7373]

Only dropped it 1". Went from 38 1/4" to 37 1/4".

[@JamesRMuniz]

Good job!!! video is well done 👍🏼

[@txracing23]

Visually did it make much of a difference? I know looking in person and on camera is completely different.

[@joshshuza]

Yes it definitely made a visual difference. The truck no longer has the factory rake. It sits level.

[@txracing23]

@@joshshuza good to know. Gonna order the belltech set here in a few days for my 20 RST. I want to do the 3/5 but not wanting to drop all that money for tires/rims right now lol.

[@luisvaldez7467]

Did you have any vibration in the rear ?

[@joshshuza]

No, it’s smooth.

[@joshshuza]

You may have to add shims if you get a vibration.

[@luisvaldez7467]

@@joshshuza thanks I'll defiantly look into that

[@LuisReyes-ro1bx]

Will it ruin the truck warranty or the 4x4 if u swap them out

[@richeymartin4163]

I’m looking to use this same kit. Did it actually lower it 2 inches ? Your measurements are only an inch different .

[@joshshuza]

It dropped the rear about 1.75"

[@antoniobetancourt3269]

If it’s was 38 1/4 and after shackles install it was on 37 1/4

[@tgee8216]

Did you grease the bushings before install?

[@joshshuza]

No we didn't, it doesn't make any noise.

[@garybermudez6392]

Looks nice. What tints percent is that

[@joshshuza]

It's 15% sides and back.

[@joshmoncada1442]

I returned mine. It caused a vibration while driving at about 20-30 mph. Sad cause it made the truck look so good haha

[@joshshuza]

Man, that sucks. I know every truck could have different issues. Hope you find something that works for you. 👍🏼

[@beniteze04]

I almost returned mine as well, due to vibration issue. Went ahead and did the 2 degree shim install, vibration went away.

[@markashlock9017]

Great vid that gives me hope. I have a 2020 Chevy 2500 Z71 Diesel that has bed rails of 59”’s and is too tall for my new Escape 5th Wheel. I could not find a Beltech conversion kit for it. Do you know if one is available? I would like to do a 2” drop. Do you think that’s a viable solution to my issue? Thanks!!!

[@joshshuza]

Not sure.

[@kmart7855]

Why no install video? You show taking out a bolt, but nothing else and no install of the new shackles!

[@hectormendez8667]

When your driving does it feel the same or different ?

[@joshshuza]

The owner said it feels the same as stock.

[@BuenasVibras909]

How’s the ride quality?

[@joshshuza]

Ride quality is the same I’m told by the owned. I installed a similar part on my F-150 and there was no ride difference

[@Saleenknight04]

Great video

[@antoniobetancourt3269]

It just drop. 1 in

[@jerryvidal5359]

Yoy not change shocks

[@joshshuza]

No

[@molson62]

That’s only a 1 inch drop

[@joshshuza]

It settled out

[@molson62]

@@joshshuza what does that mean?