Lowering Kits Compared side by side

[@baileypurvis8548]

Honestly when it comes to the hard components ill choose cheap, but springs and shocks ill spend the extra money.

[@saltysailor770]

Thanks for showing the comparisons!!! This really helped me justify not spending an extra grand for mods I’m not interested in obtaining!!! Great Vid!!!

[@cjnetro8647]

Phenomenal Review … Thanks bro from the heart

[@bobbygallegos143]

Just ran into this video 2024 . Seem like you did all the justice. Paying for the name and these days everything is a budget build lol great vid 👌 ebays kit seemed simpler , less parts . definitely going with ebay motors

[@1194video]

I have built another Silverado since making this video and again went with the EBay kit, was not disappointed

[@louiegutierrez2680]

I’ve used bell tech lowering products for yrs and they are great, u guys do the research on bell tech they are the pioneers of lowering components for any vehicle and still on top of innovation and design for new vehicles in the market, that they are a little more expensive yes they are the best in the market and all of their products are USA Manufactured, but hey not everyone can afford good quality parts for their build and they have to go a cheaper way and there’s nothing wrong with that .

[@mkgarage510]

I've installed a couple cheap kits. It was a no brainer after the first to go that direction on the second one. No problems on my end with the cheap kit. But like you said, I had no intention of buying higher end brake setups, like a willwood etc. Thats my 2 cents lol

[@1194video]

The beltech required smaller bearings where the cheap kit was oem size bearings so I liked the cheap kit better hands down. I dont see the need for the 1000 upcharge to add fancy calipers just for bragging rights either.

[@BOHICA01]

Great video Lucas

[@luisvillalobos4976]

I think it’s all the same. Maybe the springs might be the big difference when it all mounted and it settles one might be a little lower.

[@thatrebelboy48]

The only thing I'll add is about the springs. The one that you have linked in your description is for a V6 truck. If that's the exact same kit you have here, that's why the springs are different. Only thing this will do for a truck that has a V8 is lower it a little more than the V8 springs. Also when ordering a kit that includes a spindle, make sure you get the kit that matches your brake rotor thickness. 1" rotors vs 1.25" rotors. Great video!!

[@1194video]

That’s very true.

[@JoseMartinez-nm7ht]

Excellent review, buddy!

[@1194video]

Thank you!!!

[@sethv1488]

I have a 2002 z66 I'm also lowering it mine has 20-in wheels with BFG 35-inch all-terrains right now but that wasn't me that was the guy I bought it from so she's getting new shoes and slammed on the ground I think an even hidden side pipes stashing either into the body or fake running boards nothing too extravagant Don't have all that much time to do it The good luck and did it drive nice after you were done

[@alexo1226]

Great vid3o , thank you sharing

[@grizzlyridge4379]

I went with Bell Tech. I think i still would.

[@1194video]

They have an excellent kit no doubt

[@corey6393]

That $500 ebay kit is now over $700, just like everything else. Seems to be that the ebay kit just ripped off the design and built it with cheap overseas labor to get that price point. Who knows if Bell Tech outsources their materials/machining for their kits, but it appears they came up with the quality design, and maybe should get something out of that effort. I'm considering a 5/7 drop on my 93 work truck. one question I have about this kit is whether you need the shock relocation kit out back. Or does the new shock in the kit not need the extender?

[@1194video]

You do not need the shock replicator kit. That is only required if you use stock size shocks

[@scottrockett6382]

So helpful!

[@TimeVault1]

Nice work! Thanks!

[@stevenlynch8617]

I know this is a old video but does the eBay kit keep the factory front track width or does it make it wider. Thanks

[@1194video]

The eBay kit does seem to make it just about a .5 wider

[@KevinRoadrageGarage]

Id buy the cheap and run good shocks

[@1194video]

Good advice

[@The4cylinder]

is there a link to eBay kit

[@1194video]

www.ebay.com/itm/293579827741

[@rikkijohnson1305]

Is that the full kit or do I need to buy other parts?

[@1194video]

That’s everything needed nothing else required other than tools and grease

[@salvadorromero4038]

What belltec kit are you using for comparison? Do you have the model # or link?

[@1194video]

It’s the 694sp with upgraded spindles for an aftermarket braking system. I used oem calipers but it gives an option.

[@wigen8385]

Do you have a link to the ebay axle flip kit?

[@1194video]

It’s in the description also put the link in comments section

[@justinfox5136]

Let me know how it does may see if u wanna do mine lol

[@1194video]

iv already installed the beltech and i can honestly say that the cheap kit is the way to go. the spindle on the beltech requires you to change out your front bearings to smaller where the cheap kit allows your oem bearing sizes

[@joeaudi3408]

When lowering a truck is it necessary to change the control arms or keep The factory ones. Truck is brand new btw

[@1194video]

You do not need to replace the control arms, you can however buy lowering control arms that utilize stock suspension and use the arms to angle the spindle to lower without using aftermarket springs and spindles. If using air ride I do suggest control arms but if not going air ride then no need to replace the factory a arm components

[@reflexzyt8550]

whats a good drop kit for a 1997 ford f150 single cab

[@1194video]

@@reflexzyt8550 depends on the drop, you could do springs and shackles, flip kit. And lower control arms, lowering leafs. And hangers, it all depends on how low you wanna go, I recommend going to bell techs website

[@ItzL0s29]

Will it fit a 1st gen Tahoe?

[@1194video]

I’m not familiar with the suspension on the taho, is it coil? I thought they had torsion bar suspension

[@mrodriguez559]

That looks like a REACT spindle

[@sethv1488]

Should have used the cheap kit then you could have thrown some nice wheels on it too and maybe even took the wife out for dinner

[@reowhite4862]

When you open your mouth sounds just like corn bread. Like like you came straight out the Hollers of Kentucky or Tennessee. 😅😅😅

[@1194video]

@@reowhite4862 well….I did lol right here in Tennessee baby lol

[@sempergumby8734]

It's cheap and perfect until the wheels fall off 😂

[@1194video]

@@sempergumby8734 been 3 years and still doing fine

[@sempergumby8734]

Yeah so is my cheap blender from wally and I still don't trust it 😂

[@1194video]

@@sempergumby8734 can’t say I blame you.

[@victorgabino2988]

Sooo Chinese or American made 😂