*2020 update* Behringer p16 in ear system with analog mixer

Here is an updated video answering some of the questions you guys had in the previous video. If you have anymore questions please feel free to leave a comment down below and I’ll do my best to get back to you as soon as I can. Thanks for watching!

[@ourvoice7]

Please read through the comments as I answered some questions already! If you still don’t find an answer then go ahead and let me know!

[@wheeler116]

You don’t technically need these adapters. You can half insert the .25” cable so that only one band transmits data and that will provide the same effect. But its probably better to have the adapters for the security of not having a channel come loose during the set

[@neburrh1]

Thanks for the video. My church uses analog as well and I've been wanting to get in ears for the musicians for awhile now. Now I know how to set it up

[@krustonia]

Thanks man greetings from Phoenix!!

[@johnnysmith1618]

Thank you for showing this - from Calvary Chapel River Oaks in Georgia

[@jessemarino8705]

Thank you for the video. One question; why do you need a stereo adapter for your snake cable that is already stereo?

[@dkgerman1]

Thanks bro. Great info. God bless 🙏🏽

[@charlschuck6]

Bro that setup is nice I’ll suggest To raise funds and your already in the Behringer platform get any digital Ethernet mixer they are awesome your control over Ethernet will be much better just make sure they are compatible with the play p16 you got and you can sale the Yamaha with that Ethernet you have hooked up you won’t need it the 16channels so much space you’ll have :) but for now keep praising the lord for what you guys have

[@racingbarrow3794]

I have a question so I see you have the P 16 running for your input on the back of the board but how are you getting sound out? Those are not outlets, so how is it getting signal back to the P16 through that with a quarter inch connector is for

[@lamlo]

Thank you for this! I've looked everywhere for information about running the P16-I into the P16-D, and this video proves that it's possible and it works!

[@danroxas]

why did you need an adapter for the io port? and did not just plugged straight in to the board using the snake? the snake cable looks like a stereo cable aswell... is because of the polarity? been wanting to do this set up for our iem at church aswell but for now we just get all our signal from the phones out from our old analog mixer

[@divinefamily9365]

Was is the insert port on the mixer you used

[@markreynaldarique9109]

How maany auxillary out does your moxer have?

[@quavonbrooks2031]

I do have a question do you need the P16-1 and P16-D?

[@godspeed7771]

Ok thank you for showing us this video I have a question when putting every channel in the mixer for the inter ear monitors does everyone have to use in ear monitor or can they still use the weg monitors we still have some that don't know if they like inter ear monitors yet

[@JuanManuelOffical]

I have a question what if I only have 8 channels that has the I/O. Can I substitute it with something else?

[@pgianola]

does the mixer need to have 16 aux out???

[@nxsrf]

thank you my friend. the video is perfect. I managed to assimilate everything you said. I have two questions ... can I use the Behringer p16 with another personal mixer for example, Roland or aviom, or does it have to be exclusively from Behringer ??? and I can use the p16 directly on the personal mixer and link to each other without the need for a distributor like the one behind the drum ??

[@woodyoulove-reynaldguibone6890]

Hi.. Thank you for the video. May I know why do you have to use an trs adapter? since I'm seeing that your snake has already have trs adapter.

[@lilacst]

thank you so much dude, blessings and take care♥