2020 WRX STI Brake Rotors & Pads - DBA T3000 Hawk 5.0

Not a how to completely because im not a mechanic this is a hobby and this is how i did my brake rotor and pad replacement
Parts
Rotors = DBA 4000 Series T3 Slotted
Front = DBB43050S-10
Rear = DBB43051S-10
Pads = hawk hps 5.0 brake pads
Front = HB616B.607
Rear = HB914B.580
TOOLS AND STUFF I USED
-3/8 RACTHET
- FLAT HEAD SCREW DRIVER
- BREAKER BAR FOR LUG NUTS
-19 MM SOCKET (LUG NUTS & FRONT CALIPER BOLTS)
-17 MM SOCKET ( BRAKE CALIPER BOLTS REAR)
-13 MM SOCKET ( BOLT THAT HOLDS FRONT BRAKE PAD HARDWARE )
- TORQUE WRENCH
- PUNCH PIN TOOL "TORPEDO"
- 5 POUND ORANGE MALLET
- METAL MALLET TO SMACK RUSTED ROTOR OFF
- METAL BRUSH
- PERMATEX ANTI-SEIZE LUBE #80078
- BRAKE PARTS CLEANER

[@anthonyc.6170]

Just a FYI, from the video, it appears that you put the rear rotor on w/o aligning it to the parking brake adjustment access opening.

[@Dr_hehe]

your absolutely right Thank YOU!

[@JettaGli08]

Is it the same for the rear?

[@Dr_hehe]

Rotors = DBA 4000 Series T3 Slotted Front = DBB43050S-10 Rear = DBB43051S-10 Pads = hawk hps 5.0 brake pads Front = HB616B.607 Rear = HB914B.580

[@Electro151000]

Have u been hearing any clanking from the front ? I heard that was an issue with those pads since there is no shims

[@Dr_hehe]

i thought i would to but no quiet as can be without the shims

[@Dr_hehe]

also i do have a ets cat back thats kinda loud but even in stop and go traffic i dont hear anything

[@Electro151000]

@@Dr_hehe thanks man I just bought these exact pads, I’m running a tomei so I probably won’t hear anything either lol

[@anotherstar8125]

what did you torque all the bolts to?

[@chocOneOOne]

Off the top of my head I know the front bracket bolts are 59 ft/lb - Pins - 20 ft/lb...the rear may be the same

[@toxicwaste491]

Is it 80 ft lbs for the caliper bolts

[@Dr_hehe]

@@toxicwaste491 yesssiirr