2021-2023 2.7L Bronco: Ford Performance M-9603-B27 Pro-Cal Tuner | Install & Review

[@wheeler2816]

Installed this in my ranger Raptor 3.0. Its awesome. woke it up from 405 to 455 hp. Also shifting and throttling is so much better

[@UnityMotorSportsGarage]

Good stuff! Love the channel

[@latemodelrestoration]

Thanks! -Landan

[@Lethal_Venom]

My Bronco needs this

[@edkelley6916]

I got this the first week it came out, i absolutely love it for my 2.3 7 speed manual

[@duderdude4831]

Did you try the auto rev matching?

[@gianlucaalessia5538]

If this thing cost half this, they'd fly off the shelf and if you could use it on a new bronco after u trade ur old one in but for 800 just not worth the little bump for me anyway. They need an aftermarket version, can't see it being that hard to copy and improve.

[@ck4391]

So if I install this and need to smog my vehicle in CA do I just need to change the setting back to stock or is it more involved than that?

[@guyver77]

Since this is somewhat of a basic tuner would this tune need to be done before or after install of let’s say exhaust and CAI? All he mentioned was that you could always retune it but no mention of where you would add those add on into the software

[@latemodelrestoration]

This tuner and calibration will not support cold air intakes or exhaust upgrades that change/modify the catalytic converter. The programmable features I discuss starting at 1:35 are what the tuner can change. -Landan

[@guyver77]

I’ve seen people use this tune after changing out those parts though?

[@latemodelrestoration]

@@guyver77 Let me be more specific then. Folks are more than likely running cold air intakes that are marketed and sold as "no tune required". If the MAF housing size is changed, a recalibration is required. The catalytic converter statement is mentioned because they are part of the emissions system. -Landan

[@ibrockin4u]

Great video, will this disable the AutoStart/stop ?

[@latemodelrestoration]

Thanks for the comment! IIRC, once you disable the auto start/stop, it remains off. It's been a few years since I had my hands on this tool, but I've also read/seen of other customers/owners reporting the same thing. -Landan

[@BirdDogOffRoadAdventures]

How do you go in to change the tire size and Octane rating?

[@latemodelrestoration]

If I remember correctly, those parameters are under "Diagnostics & Tools". -Landan

[@BirdDogOffRoadAdventures]

@@latemodelrestoration Thanks, I just upgraded to 38s from 37s and want to adjust up as much as it will allow

[@subiesti06]

Has Ford updated the tuner to work with 2022 Broncos in California yet?

[@latemodelrestoration]

Unfortunately, no they haven't. -Landan

[@PathsLessTraveled]

As of now, yes. 50 state compliant.

[@Ecobeast2.7]

Does the procal remove the speed limiter

[@latemodelrestoration]

No, the speed limiter is not removed with the ProCal. -Landan

[@jjhernandez5244]

I would like for this gains to be on regular fuel.

[@latemodelrestoration]

JJ - I think you speak for most of us out there. We all want performance gains with cheaper fuel. -Landan

[@kevinskonieczny7708]

You would see near the same gains by just using good quality 93 oct over 87. Can you use 87 in a FI motor, yeah, should you, NO.

[@terminatorcoyote6319]

The 93 fuel alone gives the extra power 😂

[@jjhernandez5244]

​@@whpony96 30 horsepower with premium fuel.

[@terminatorcoyote6319]

Well go head and buy it

[@kevinskonieczny7708]

@@terminatorcoyote6319 they don't understand FI LOL

[@Aceinfinity-le8zc]

Can this be put on a new bronco or do you need to complete the engine break in ?

[@latemodelrestoration]

That's totally up to you. If it was my Bronco, I'd probably go through the recommended break-in period, change the oil, and then install the tune. Just my two cents. Hope this helps. -Landan

[@spyder3276]

Would that work with an aftermarket intake and exhaust?

[@latemodelrestoration]

As long as the intake is marketed as "no tune required". If a calibration is required, the Ford Pro Cal will not work. As far as exhaust, if you're talking about a basic cat back, yes, the Pro Cal will work. Let me know if you have any other questions. -Landan

[@ChuckG92]

Yeah, WISH my taxes were under 20%...

[@Baddeal]

Basically Livernois with a Ford Logo

[@kevinskonieczny7708]

Livernois will provide better gains. This is not a Livernois tune program.

[@YtRando69]

Wow, a Livernois knock off. Yet again. Odd though, I've seen other STOCK dyno's making 300whp and 415 wtq 🤔

[@Serenityindailylife]

10hp for $500.....yeah, ill wait.

[@codyhannigan6322]

Went up to $625