2021 - 2023 Hyundai Santa Fe Key Fob Battery Replacement - How To Change Or Replace Remote Batteries

A quick DIY video tutorial on how to change the remote fob smart key battery for a 2021 - 2023 Hyundai Santa Fe. The remote key fob battery that you will need to remove and replace is replacement battery CR2032.
This Hyundai Santa Fe smart key remote fob uses:
FCC ID: TQ8-FOB-4F27 , TQ8FOB4F27
Frequency: 433 MHz
Battery: CR2032
On Board Programming: No
This video tutorial will show you how to remove and replace or change the smart key remote fob battery on the following Hyundai vehicles:
2021 Hyundai Santa Fe
2022 Hyundai Santa Fe
2023 Hyundai Santa Fe
Free keyless entry remote fob programming instructions available at www.ProgramYourRemote.com/
Free Ignition key programming procedures available at www.ProgramAutoKeys.com/
Find a Locksmith in your area with www.LocateALocksmith.com

[@raymondchui5375]

If you don't have a screwdriver handy, you can use the tip emergency key and twist to pop the corner near the emergency entry slot for removal and access.

[@keithburritt2330]

Thank you. Very helpful.

[@PYR-Auto]

You're welcome!

[@RealtorEarl]

Thanks ver much for the instructions that were hard to find.

[@PYR-Auto]

You're Welcome!

[@fossilmaker5745]

Thank you for video.

[@PYR-Auto]

You are welcome!

[@Bennyboysgarage_]

Heck ya! Saved me n my wife lots! You the man

[@PYR-Auto]

Glad it helped

[@dawnokuka1716]

Thank yoi

[@PYR-Auto]

You're Welcome!

[@iismyii5585]

Thank you are a life saver

[@PYR-Auto]

You're Welcome!

[@romantashevRT]

HI. Do you know how to disable the wireless signal on the key fob? (instead of making a faraday box) ..as a theft precaution. Thanks.

[@PYR-Auto]

Other than taking the battery out the only thing I've really seen is the little pouches you can buy that the key fob be put into and it blocks the signal.

[@romantashevRT]

@@PYR-Auto Thanks...that's the faraday box )

[@corinnetitcomb7167]

How do you dry one of these key fobs out. I accidentally put mine in the washing machine & now doesn't work. Cheers

[@PYR-Auto]

You can try taking it apart as shown in the video and letting everything dry out - then replace the battery. However, the fob may end up just needing to be replaced