2021 Mach 1 Mods - Installing GT500 Gauges

[@mallakiNY]

Are you sure the Part# FR3V-10B944-AC is for Oil Pressure and Oil Temp? When I google FR3V-10B944-AC - I get the standard Mach1 with Vacum... It seems that Part # FR3Z-10849-E is for Oil Temp.

[@wiskeybear9759]

I didn’t pay too close attention to the my color part, but that should only work for the middle gauges with the headlights on. It’s also controlled by the primary color option. I just checked in my Mach 1. By the way great color :). Have the same one.

[@georgeboussi9262]

We're not so lucky down here in OZ, we don't get those gauges in our Mach 1's !!! (great vid mate keep them coming)

[@bobrocco5754]

In Gauges, there is a Configure Gauges menu item where you can select up to 3 "virtual" gauges that will display between the tach and speedo (Show Gauges then scroll up or down from the line item menu you have on display ). For temperatures you can select Inlet Air, Engine Head, Trans Oil (I have the 10R80) and Axle temperatures. With the water temp gauge on the dash, I've found during track use that head, trans oil and axle oil have been more than adequate indicating overall temp status of the car. Oil temp would have been nice and I do agree the vacuum gauge is not very useful. Even in a boosted config you would still have to replace it!

[@sailingzigzags6511]

Man Truck your brave popping the panels loose. I love the GT500 bezel look. Maybe change the vents to the 500🤔. Can’t wait to see some more track time and the drag between y’all’s two rides

[@dougcoleburn1579]

Just found your channel today! Really enjoying! I have a 2019 black Bullitt. And yes that Vacuum gauge is a waste. I may just do this upgrade. Although I may want a Camaro ZL1 now :) Have a great day!

[@bobdicicco3979]

Nice video. I would be a wreck trying to take that dash out of my Mach 1. Thar's why I follow you. Thanks. BTW, I agree with you 100%. This car is made for driving fast. It is so much fun to drive. And it looks goods great doing it. I have the Fighter Jet Gray Mach 1 and almost every time I take it out someone is giving me a thumbs-up or beeping their horns.

[@michaeld5198]

That’s too bad about the my color but I’m definitely loving the mod. The car is looking great man keep it up 👍!

[@MetalEffort]

Thanks for taking one for the team.

[@dougwatson6406]

Installed the gauges today and of course no my color, not a big deal. It's nice not having the pressure gauge pegged out on cold starts and having oil temp available now.

[@whpony96]

FR3V-10B944-AC

[@DeadBen.]

Thanks for the vid and idea. I bought a Mach 1 a couple weeks ago. Love it. Now gonna search for a set of these gauges because not seeing oil temp is for sure a bit of a miss...and I don’t mind so much if My Color doesn’t work. When I searched that part number...seemed to pull up 2016+ sets...so maybe it’s legacy part...or they didn’t send you what you it was supposed to be.

[@truckandroll989]

Yea thats interesting. I got it from Midway Mustangs off Ebay. Maybe its the same part as a 16 GT350

[@Jon4335]

You should definitely try turning on your headlights and see if the color works. I believe the color only come on at night with the headlights. Curious if that works?

[@Taino5.0]

You can get gt500 vents if it really bothers you too. They are very easy to take out and put in. I changed my dash for a California special dash.

[@arkanesh]

This is a realy intresting Video for me, because in Austria (Europe) we do not have this Gauges installed in our Mach1. There is just another ventilation outlet, like the GT''s. If i figure out where this wire is to connect i can install these Gauges too....

[@truckandroll989]

Interesting. Yea that would make your car very unique in Austria. Im assuming the units would be wrong (i.e. psi and F) but otherwise very cool

[@xGR1MxREAPERx]

I seen in another video of a guy like you who didn’t have them based on location not model. He took the panel off and the wires were wrapped up under there. Good luck 👍🏼

[@arkanesh]

Thanks, this is a very good informtion and makes decision a lot easyer

[@keithehrecke3946]

How did you change the signal from vacuum to oil temp?

[@truckandroll989]

Funny thing is the car just “knows” its plug and play. The right term might be like a can bus signal but dont quote me. The values are calculated based on other engine sensors

[@floyd4311]

That was my first thought. I’m not a car engineer so 🤷🏻‍♂️. Cool ass video tho.

[@paulmiazga7423]

Is the gauge plug a multi sensor capable. If you we’re measuring vacuum before, how does it transfer to measure oil temp? And does the gauge now match the readout on the dash cluster? Thx!

[@truckandroll989]

Yea no changes are required. Just plug and play and it works. Theres no digital readout on cluster but yes it tracks

[@SkullcrusherGamingTV]

You should try and see if the GT500 radio bezel will work on the Mach 1. The GT500 has a physical switch for active exhaust 👀

[@truckandroll989]

The GT350 is the same way and I prefer it. The steering feel dealio is dumb in my opinion. I wish it was an exhaust toggle

[@TheCdM1981]

The dash never breaks when you pull it out. What does break extremely easy are the clips on the cluster. In the end it’s not a big deal because it’s screwed into the dash and has 2 clips. So if at least one doesn’t break off it’s fine. And lastly. That trim on the bezel comes off extremely easy. Just swap it out with the gauge you’re removing. There’s no reason to have mismatched trim.

[@alnfong1228]

Great video man! Can you also do a video on your 4 posts lift? Please and thank you 🙏🏼

[@ronaldfierro9986]

hello.......enjoying your vids........???.......your new Mach 1........are you thinking of changing your exhaust system....if your doing that what are you looking at.......the X or the H system, and what brand do you prefer.......thanks for your time....

[@truckandroll989]

Just did an h pipe only and it sounds great. Ive got another video of it. I wont change mufflers as i like active system it comes with. Thanks for watching!

[@ebassstudent1454]

I’d like to see a similar video putting GT500 gages into a Mustang GT. I think in order to do so the center air duct must be cut back and the harness found.

[@sirgaming3813]

The Mach 1 does not have an oil temp sensor, how can it read oil temps?

[@tobization]

The number on the part itself is the engineering number and not the part number. They are very close but not the same.

[@truckandroll989]

Good info didnt know that

[@DeadBen.]

@@truckandroll989 I just installed a set...ordered directly from a local Ford dealer. Part # FR3Z-10849-E as shown on the invoice and box (GT350 gauge though). Thanks again for the idea!

[@dougcoleburn1579]

@@DeadBen. Thanks for the part number. So did your my color lighting work? Or just shows the lighting as in the video. Thanks

[@DeadBen.]

@@dougcoleburn1579 Just white light...no My Color. But I think it still looks great.

[@dougcoleburn1579]

@@DeadBen. thank you!

[@ThomisticAmerican13FOX]

Thanks for the attempt at this, I had the same exact thought process. I want to do this for the oil temp guage alone, but squeeks ans rattles bother me so Im terrified of pulling dash trim off. I also have premium, Velocity Blue, 6MT, upgraded wheels, NAV, amd I have red calipers.

[@Sly_Wolf_1]

I would open up the module and see i I couls swap out the gauges only and keep the lighting electronics. Further more I'm in the uk, and considering a mach 1, sad thing is that here we don't get track packs, performance packs or extra two gauges in centre dash between vents yet we pay $20k more than the US for a mach 1.

[@dead_miles]

Does the oil temp in the new gauge match the oil temp shown in the gauge cluster? Just wanted to double check that you're getting an accurate reading. Thanks for doing this!

[@truckandroll989]

My model does not show oil temperature in the gauge cluster. Which is pretty stupid in my opinion

[@Ponyreiter]

​@@truckandroll989Cylinder head temperature (measured on critical cylinder 8) can be unlocked with ForScan.

[@gt350deuce5]

@truckandroll what is considered normal temp for the mach 1? just ordered the gt350 gauges for my 22 mach 1

[@truckandroll989]

I believe youd like to see oil temp within 20degrees of coolant temp. On a road course if you are flogging it its going to be hotter but generally it should track close ish to your coolant temp

[@TheHolyHandGrenade763]

What part number did you order? I have a 22 Mach 1 and when I search for the FR3V-10B944-AC gages in this video I see matches for FR3Z-10849-E gages. It looks like the same application, but one is a MFR part number and the other is an OEM part number?

[@kpowren1665]

Have you tried turning the headlights on? My gauges don't show color unless the headlights are on. Might be worth a try(and I want to do this mod so I gotta find out!)

[@Taino5.0]

Also check if forscan could fix the color change.

[@Japplesnap]

They need to make a boost/vacuum gauge for us who plan to install a turbo.

[@truckandroll989]

They do! Its about $250 bucks. Check out american muscles website

[@truckandroll989]

www.americanmuscle.com/ford-performance-center-instrument-performance-pack-boost-gauge-kit-1517.html There ya go!

[@Japplesnap]

@@truckandroll989 Nice!

[@odfloresruiz]

Quick question my friend. Which K&N filter would fit your Mustang Mach 1 2021?

[@truckandroll989]

To be honest Im not sure sorry. I plan to just keep the stocker for a while

[@odfloresruiz]

@@truckandroll989 I think I might too at least while the guarentee is valid... I haven't found a clear option 😞

[@acexbox3982]

Does it change colors with the headlights on?

[@truckandroll989]

No it does not unfortunately

[@swndle1]

What or where are you getting the oil temp from is there a sending unit or is it part of the original wiring harness?

[@truckandroll989]

Yea its the same harness for all the cars so the functionality is built in

[@Ponyreiter]

​@@truckandroll989As far as I know, there is no oil temperature sensor. Are you sure, that you not only get a calculated value or the value from the cylinder head?

[@truckandroll989]

@@Ponyreiter i know for sure there is a pressure sensor as I has to move it when I installed my turbos. You may be right that its inferred from the ECU. I know on the gt500 they show it and Im assuming its a similar system. It always worked without issue.

[@Ponyreiter]

@truckandroll989 GT500 has a Sensor in the oil pan. I think the oil pan with sensor is also available for the Coyote 3 from Ford Performance (M-6675-M52S).

[@truckandroll989]

I wonder if the Mach 1 has anything different from a standard GT. However its coming up with the value I can tell you the gauge pod plugs in no problem and supplies a value that tracks similar to coolant temp. I believe it to be accurate. If you are a stickler all you need to know is the GT500 bezel is a slightly different color and although the gauges are backlit they cannot be controlled using mycolor

[@Spartan_ZR1]

When you turned the headlights on(or went out at night) did the color change?

[@truckandroll989]

It did not unfortunately:/

[@Spartan_ZR1]

@@truckandroll989 copy that

[@JoeyBurnsRed]

The gt500 only has my color on the cluster kinda lame it doesn't offer ambient lighting for a 80k car

[@truckandroll989]

Yea the Mach 1 had ambient lighting with the stock gauges. The GT500 plugs in and works but for some reason you lose the functionality of the ambient lighting when swapping a GT500 gauge into a Mach 1

[@dougwatson6406]

When you installed the new gauges did you still have the blue color?

[@truckandroll989]

No you lose that functionality for whatever reason.

[@dougwatson6406]

@@truckandroll989 Any color at all so at night you can see them?

[@truckandroll989]

@@dougwatson6406 yes they are back lit fine just no MyColor

[@dougwatson6406]

@@truckandroll989 Great thanks

[@dougwatson6406]

What's your normal oil temp running?

[@truckandroll989]

Typically within 20 degrees or so of coolant temp. Low 200s. Only time i saw any sort of elevated temps was after a bunch of back to back roll races from 40-130mph

[@dougwatson6406]

@@truckandroll989 Good info thanks

[@bowchickawowwow6246]

It’s an amazing Mod.!!! Could you try this at night with My Color maybe playing around to see if it work’s. Thank you.!!!

[@truckandroll989]

I have driven then the car at night and unfortunately that doesnt change the functionality. The was my gauges are setup it works for me but if you like having red, green, purple, etc. it might be something to consider.

[@GTPRIME209]

Yes...new video.

[@truckandroll989]

Thanks for coming back!

[@TinaJohnston-i3d]

thank you for the info

[@ajah3247]

Your car just gained 63 more HP lol

[@truckandroll989]

64 if you count the stickers I have tastefully hidden ;)

[@allanhood8402]

Garbage mods makes the car worthless on the resell value

[@truckandroll989]

Couple things 1. Why all of the negativity. I make my videos to help people, answer questions etc. This is the second comment you’ve made that is just rude. If you dont have anything nice to say just move along. 2. Who says I need to sell the car this way? It is plug and play I could swap the stockers back in. 3. I track my car, as it is intended. Im not sitting here worrying about resale value for the next guy. Please keep the comments nice.