We’re 300+ miles into our Pro XP ownership, so we’re going to do a walk around of the accessories we’ve added and provide some first impressions.
Пікірлер: 47
@markdrake65452 ай бұрын
Limit straps w/sway bar attached? Interesting! Side view mirrors that won't let you see behind the car? Crazy! Thank you, I needed that. I was having a hard day!
@dirtjunkienation Жыл бұрын
I ordered a proxp will be on Tuesday! Super stoked! Your buggy is looking good!
@DirtyRoosterOffroad Жыл бұрын
Thank you! It's been a great machine so far.
@jeffmorse55992 жыл бұрын
interesting point on the roof, they should make a closeoff for the slots on rainy days as air down the back would be good on hot days.
@shreqboi12 жыл бұрын
For the light bar you can probably bend the mount tabs on either side out a bit so you can center it instead of flipping one mount in the opposite direction. Nice mods 👍🏽
@DirtyRoosterOffroad2 жыл бұрын
Thanks. We did consider bending the mounts, but decided against it.
@scottsizemore18212 жыл бұрын
I was wondering if you have or had any rubbing issues with the 32 inch xrt370 tires since they are a true 32 inch tall tire?
@davidreeder80742 жыл бұрын
Add the Wolfsnout cool cab kit. I added it to my Pro XP and noticed a huge difference in the heat in the tunnel
@DirtyRoosterOffroad2 жыл бұрын
We knew about this for the XPs, but not the Pros. Will definitely go check it out.
@patrickraf98844 ай бұрын
Great video! How do you keep it clean or clean after its muddy ? Any of products?
@DirtyRoosterOffroad3 ай бұрын
Thank you! It just takes patience and some SC1 for the plastics and Bleche White to get the crud off the tires.
@petemietz79672 жыл бұрын
Who makes the slider/kickers? Looks like HZ but can’t find then on line. I like the dual purpose and looks of them. Thanks!
@DirtyRoosterOffroad2 жыл бұрын
Houser Racing.
@tddcmptn2 жыл бұрын
Good info. Where did you order your NRP shifter from. Thanks
@DirtyRoosterOffroad2 жыл бұрын
This one, we purchased from Kombustion Motorsports while they were running a sale. The other two we've installed came directly from NRP.
@reddirtwarriors48462 жыл бұрын
Who makes the low-profile rear bumper? Nice and clean!
@DirtyRoosterOffroad2 жыл бұрын
It’s a Polaris OEM bumper. They make two versions. This one and high coverage.
@BJ-fi7mx2 жыл бұрын
Raise the console lid there are two quarter turn screws and console and all comes out without taking torque screws out I done the same thing as u before I figured that out
@DirtyRoosterOffroad2 жыл бұрын
Good point. I’ve had the entire interior out, but missed that method. I can see it now that you said it.
@snomofilms2 жыл бұрын
Have the Amazon link to that light bar and mounting?
@DirtyRoosterOffroad2 жыл бұрын
Here's the link to the light. I used some other mounts that I had laying around, so don't have a link for those. You'll be looking for a mount that's about 2" from the base to center of the hole that mounts to the light. www.amazon.com/gp/product/B07PYR79WR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@brianbyers26822 жыл бұрын
On your rear shocks you have the plastic spacer in upside down per shock therapy instructions! That might be why they are rubbing.
@DirtyRoosterOffroad2 жыл бұрын
Thanks for the input. We're always glad to hear from our viewers. However, the spacers are, in fact, installed correctly. Check the shock therapy video here: kzbin.info/www/bejne/f6jKXoePbd-qrKM. Also, if they were the other way, they wouldn't engage the cross over rings properly. It's normal for the cross over rings to rub, but we just don't like how much these are rubbing.
@brianbyers26822 жыл бұрын
Check this video out at the 5:30 mark kzbin.info/www/bejne/api4Y4N4fKadsNk
@brianbyers26822 жыл бұрын
I seen the video, I may call ST tomorrow and ask them what's going on. Everyone Ive seen around here and including mine are installed the other way per the directions that were in the box.
@DirtyRoosterOffroad2 жыл бұрын
The video you linked is for the Fox shocks. Shock Therapy supplies their own divider for the Fox shocks, and it is upside down compared to the stock divider. Our shocks are Walker Evans and use the stock divider in the stock orientation. So, if you have Fox shocks you're good.
@bradysnell4774 Жыл бұрын
The outlaw trails in West Virginia??
@DirtyRoosterOffroad Жыл бұрын
Not sure what this is in reference to. Maybe a different video?
@castper19882 жыл бұрын
simpson seats work with pro xp also
@DirtyRoosterOffroad2 жыл бұрын
Good to know. Thanks!
@josephoverstreet55842 жыл бұрын
Did you end up changing harnesses?
@DirtyRoosterOffroad2 жыл бұрын
No. The mobility is worth the slight discomfort.
@josephoverstreet55842 жыл бұрын
I was hoping you did. I was going to try to buy them from you 😂
@skeim56202 жыл бұрын
Do you think it’s built as well as Honda talon
@skeim56202 жыл бұрын
Do your doors rattle
@DirtyRoosterOffroad2 жыл бұрын
I can’t really say on build quality. Honda has a reputation of great quality. I do know we didn’t even consider the Talon, mostly due to what we’ve heard about suspension geometry and it’s terrible ride.