The 2021 racing season is finally approaching and it was time to get a fresh setup for the year. If you enjoyed the video don't forget to leave a like and subscribe for more!!
Пікірлер: 81
@Mid-MichiganFilms2113 жыл бұрын
Keep up with the videos man. Doing a good job 👌
@zycjsubs98723 жыл бұрын
I love when u build
@matteo_2453 жыл бұрын
Sick bike. Love the attention to detail.🔥
@BayAreaBully76672 жыл бұрын
are these beats by nick mira?
@lithec34342 жыл бұрын
see where do i get all these good looking parts like the gripper seat and the exhaust and all that nice looking stuff
@jdstory3 жыл бұрын
Awesome bike Bailey! Hope the season goes well for you. Just wondering what forks and front brake set up you are running? I have a Thumpstar TSX 212 for playing around on and I'm curious what aftermarket parts people put on these little bikes... you seem to be getting some pretty decent air in some of your other videos.
@BaileyLuntsford3 жыл бұрын
The front forks are a set of fast ace they also came with the clamps, we had to make a custom steering stem to get the clamps to fit with the thumpstar frame and front brakes are just stock Thumpstar
@juansprojects30562 жыл бұрын
Sick graphics kit. Like how the frame bends were made.
@harvey97022 жыл бұрын
Excelente 😎👍
@Cummins2 Жыл бұрын
What size front and rear tires are you running? Also what is the bend of those bars?
@unkownmedia70033 жыл бұрын
LOVE THE BUILD BRO, curios what tires are those
@BaileyLuntsford3 жыл бұрын
Thanks man, but they are Mitas pit cross tires.
@dirtwheels66792 жыл бұрын
Do you have the suspension modified? Also, what is that front tire. It looks WIDE!
@Jazsft3 жыл бұрын
Killer bro sucks to hear you’ve only had trouble with the 4 speed curious to know why you don’t run an oil cooler? how you find running the carb in front?
@BaileyLuntsford3 жыл бұрын
Not really a need for it when your only running a few laps on a racetrack and it also opens up room for me to throw a bigger carb in there. And I had to run the carb out the front bc there wasn’t room to put it facing backwards, but so far it’s working out good!
@permafrost85413 жыл бұрын
how much front travel do you get on those forks? love the vids m8
@BaileyLuntsford3 жыл бұрын
Not exactly sure I’ve never measured, but thanks man!
@andrewfinch67753 жыл бұрын
Sick bike dude! Just wondering what plastics are interchangeable? Are they the same as the KTM65?
@BaileyLuntsford3 жыл бұрын
Crf110 older style
@Sub_division_2 жыл бұрын
Hey man what rear shocker is in that?
@Dennis24_3 жыл бұрын
What’s the major differences between the tsr and tsx 190
@twistedmxracing87703 жыл бұрын
Did you get the new motor with the transmission fix? They had a issue with popping outa gear and hitting false nuetral randomly. Mine popped and I bailed off the bike. They had a fix for it and it fixed it, just a keeper on the fork in behind the clutch basket
@BaileyLuntsford3 жыл бұрын
My motor had this issue right out of the box and I heard that they were known to have it so I took it apart when I was building it and fixed it right away. All it is is the little holder for the shift star it just needed bent in so it kept tension and didn’t pop off and it was good after that!
@michaelkrautz9353 жыл бұрын
Best power mods?
@DumpySkittles3 жыл бұрын
Rad champ good work! Why wouldn't you use the air filter they come stock with? Shit air flow?
@BaileyLuntsford3 жыл бұрын
With porting and high comp piston it’s very reistrictive, and the carb I’m running won’t fit pointed backwards
@mikem99532 жыл бұрын
I’m looking at buying a new 2021 140 in the next few days, and your comment about breaking that kick start shaft is freaking me out! Should I be afraid? Any tips or tricks o need to know? Must do’s?
@BaileyLuntsford2 жыл бұрын
140’s I’ve never had a problem breaking the kickstart shafts. It’s only the 190’s
@chrishickey8710 Жыл бұрын
What bend is the handlebars??
@misfitreid56943 жыл бұрын
are you using stock risers for you handle bars? i got a thumpstar 125 that i need to raise the cockpit on and im looking for some advice.
@BaileyLuntsford3 жыл бұрын
With these clamps I am... you can buy risers for the oem bar clamps I believe the brand name is “zeta” that makes them
@misfitreid56943 жыл бұрын
@@BaileyLuntsford ok sweet thank you
@Bikingwithliedtke2 жыл бұрын
hey where did you get those graphics?
@sebastiaannieuwoudt81952 ай бұрын
Hey man just wondering can you tell me all the mods your running ?
@nocornerscut53143 жыл бұрын
What headpipe are you using? I’m having trouble finding one for my 140
@BaileyLuntsford3 жыл бұрын
We custom fabbed one up
@SuperHuijs3 жыл бұрын
I have a Pitster Pro fse190r with the same engine as your Thumpstar. Your engine sounds much more brutal and more direct. I just found out that my pitster pro has a fake keihin pe28 carb from the factory. Now I'd like to put a real one on it. Should I buy a real keihin pe28 or do you recommend another one on the Daytona 190.
@JerickWallace3 жыл бұрын
Oko 30mm flat slide
@SuperHuijs2 жыл бұрын
Thanks for your reply. I have bought a real OKO 30mm carb now. Can you tell me what is your main jet and idle jet? How did you set the mixture? what position is the needle at.
@JerickWallace2 жыл бұрын
@@SuperHuijs id start at 45/125 jetting adjust from there based on your elevation and area. I didnt have to adjust my needle clip and screws on the side lower one is fuel air mixture above that will set your idle with
@SuperHuijs2 жыл бұрын
thanks, I'll get on with it.
@FALiNABoX3 жыл бұрын
So after u bent the little shift star did it fix the problem with it shifting out of gear?
@BaileyLuntsford3 жыл бұрын
Yessir
@samdibsyd61832 жыл бұрын
Bailey I’m about to buy that LM exhaust but wanted to ask you if it’s bolts straight on, I’ve got same frame as u and Zongshen 212cc
@BaileyLuntsford2 жыл бұрын
It does not, you have to cut twist and re weld a couple pieces to make it work
@samdibsyd61832 жыл бұрын
@@BaileyLuntsford you’re a champion. Thanks for your fast reply, my bike is choking with this factory Thumpstar exhaust. Urgent need of an upgrade but I’m not sure whats the best bolt on pipes for these frames & obviously engines.
@samdibsyd61832 жыл бұрын
@@BaileyLuntsford Mate I need your advice thanks, I’ve just installed my Zongshen 212 but I’m unsure if the valves are meant to be tapping that loudly, I’ve uploaded the video on my channel if you could please have a look and give me your opinion thanks
@DoubleR_Gaming2 жыл бұрын
Who did the graphics?
@samdibsyd61832 жыл бұрын
Where did you get those awesome thumpstar black decals from?
@BaileyLuntsford2 жыл бұрын
We custom made them on motocal.com
@samdibsyd61832 жыл бұрын
@@BaileyLuntsford thanks mate, I appreciate the reply. I’m here in Sydney Australia. Next week I’m upgrading from 190 to 212 big bore kit, do u recommend I run inn the 190 before installing the big bore kit. what carburettor should I run? And if u don’t mind letting me know the diameter of your custom made exhaust, how many inches n what are the bends of pipes. Thanks Bailey.
@samdibsyd61832 жыл бұрын
@@BaileyLuntsford loving the graphic website u sent me, thank you
@samdibsyd61832 жыл бұрын
@@BaileyLuntsford I was thinking about getting a 28mm Klein racing carburettor for my 190cc Zongshen but don’t know if it will fit on my 2021 141E frame which is the same as yours, what carburettor have u fitted Bailey?
@samdibsyd61832 жыл бұрын
@@BaileyLuntsford Bailey is their a way I can pay u to get me the same decals made up! I tried that site u recommend but they don’t ship to Sydney Australia and I don’t know what to do other than to ask u if u can help me out.
@07scoobywrx3 жыл бұрын
What tires are you running?
@BaileyLuntsford3 жыл бұрын
Mitas pit crosses
@YZFMX2563 жыл бұрын
62 Sunday if it doesn’t snow too much?
@BaileyLuntsford3 жыл бұрын
Wont be able to have a birthday dinner but I will be at ramjam tommorow!
@primoscustomsandrc97573 жыл бұрын
Hey mate I wanna supply these bikes where do I get one these and tsx 140s and other sizes what do I need to do
@BaileyLuntsford3 жыл бұрын
I would check on thumpstars website about becoming a dealer!
@primoscustomsandrc97573 жыл бұрын
@@BaileyLuntsford yeh will do are you a dealer still or just sponsored by thumpster
@bkoutside8933 жыл бұрын
@@primoscustomsandrc9757 He works for a dealer.
@kadeos36102 жыл бұрын
where do u get those decals
@BaileyLuntsford2 жыл бұрын
We custome made them on motocal.com
@Jude08183 жыл бұрын
Where did you get the graphics I have a tsk 140 and want graphics
@BaileyLuntsford2 жыл бұрын
Crf110 plastics and we made the graphics on motocal.com
@Dennis24_3 жыл бұрын
Thump star vs piranha. Which is better
@BaileyLuntsford3 жыл бұрын
Both are about the same, in my opinion I like how the thumpstar chassis feels better it feels more stretched out like a big bike
@Dennis24_3 жыл бұрын
@@BaileyLuntsford appreciate it. I’ve been having a hard time deciding which one I want. Overall which would you prefer and why.
@Dennis24_3 жыл бұрын
Besides the feel of the chassis. Like power, reliable, parts, ect
@alexandersopov5424 Жыл бұрын
what size front tire
@BaileyLuntsford Жыл бұрын
90/90-14
@BushCampSon10 ай бұрын
I got a thumpstar 125
@victorguajan8205 Жыл бұрын
Precio de la moto
@diehard20333 жыл бұрын
I am getting the 190thump but it looks nothing like this bad bou
@diehard20333 жыл бұрын
See this looks nothing like the 190ime looking at getting
@Hudson123392 жыл бұрын
Man! Why would you not stick with Kawasaki or Honda?
@BaileyLuntsford2 жыл бұрын
China bikes are just as good as long as you keep up with your maintenance. I still have both my name brand bikes as well
@Hudson123392 жыл бұрын
@@BaileyLuntsford Yeah but they look weird. Anyway, i love your channel! Also, can you do another Klx 110 build?
@BaileyLuntsford2 жыл бұрын
Would love to but the one I did costed me wayyy to much $$ I might do some small things to the stocker I built but won’t be anything near the full build I did to my first klx