2021 Toyota Camry SE MagnaFlow 19494 Exhaust

[@saulgoodman9193]

I replaced my resanotor with a vibrant resonator, it's a little bit louder but not as loud as a res delete. It sounds great with this exhaust system, I recommend it if you want a little bit more sound out of it . If not it still sounds great with the stock resanotor. Congrats on your purchase 👏

[@miguelgeezy]

Forsure man thanks!

[@NoEpicness]

Could you upload a clip? I’m sure everyone would like to hear it.

[@saulgoodman9193]

@@NoEpicness Forsure give me a few days I have a bunch of clips but I want to splice them all together . Need to upload them to my computer and figure out how to do that .

[@eduardodelgado7873]

Dam okay....okay the v6 just sounds epic but I want to say this is the best one for the 4.

[@miguelgeezy]

Appreciate that boss 🙏🏼👍🏼

[@vercises]

Did you cut the plastic shield on the driver side to make it fit? Im looking forward to get it but the driver side shield thing is on the way

[@andrewnutter9376]

about to get mine for the 2021 xse

[@perish7578]

okay so i got the 2020 camry se i’m planning on getting on the magnaflow 19494 cat back. can you tell me what others parts do i need to complete the setup?

[@miguelgeezy]

I ordered part 90105-A0360 (2) , part 17575, and part 17565A (NO. 3) it's just the XSE drivers side hangers

[@perish7578]

@@miguelgeezy so that’s all the parts i’ll need to order for the exhaust to be put on? and i order them from the toyota site right

[@miguelgeezy]

@@perish7578 yes sir

[@perish7578]

@@miguelgeezy bet bet ty bro

[@JediYouTube]

@@miguelgeezy for part “17565A (NO. 3)” does that mean you need three of this or just the Number 3 part?

[@xgamerx3454]

Did you have to do any cutting or welding? Or did the cat back clamped perfectly on there?

[@miguelgeezy]

Clamped perfectly

[@zeroneutral]

For the SE you need to weld some hangers on the driver's side as well as a heat shield.

[@mauricewalker872]

Just installed this kit on my 2018 SE. Toyota sells the heat shield, bolt on hanger points for the driver's side (made for xse) and additional hangers. You may need to cut off the emergency tow hitch on the passenger side, but otherwise easy install. No welding needed.

[@Calbenmike]

@@zeroneutral The hangers are not welded, they are fastened.

[@talyaho9329]

what did you do to the left side? I have an SE and it’s not dual exhaust like this

[@rustykeaton8803]

I just bought a 22. Notice any drone anywhere with the MF exhaust?

[@miguelgeezy]

Only when in high rpms which is understandable haha but if you're cruising you won't hear a thing

[@rustykeaton8803]

@@miguelgeezy Awesome! That's what I was hoping to hear! Thanks man!

[@chrismoher5444]

It drones with v6. I will tell you it does 4cyl maybe not. But i will take the minimum drone for the heads that trun when i come through in my dad mobile and every one is expecting a lotus to roll up lol

[@darielivan05]

Is your camry awd or fwd? i can’t seem to find magna flow exhaust for the awd version

[@prbigmoney22]

Will this fit in an SE nightshade AWD? can’t find much for the AWD. Was gonna do a custom dual axle back muffler delete but I’m reading that doing a muffler delete can mess up your engine

[@smooms33]

Have you gotten any compliments on the exhaust in person?

[@miguelgeezy]

Yes gotten both on the road and off when I first start my car

[@smooms33]

@@miguelgeezy that’s sick. I literally just picked up my 23 Camry SE today and this exhaust sounds great.

[@miguelgeezy]

@@smooms33 would definitely recommend it

[@PapiG13]

will this void warranty w toyota?

[@michelleaguilera7536]

What part and where can you buy it like the specific part

[@lssjgabriel575]

What is a good fit for an 07’ Camry SE? I not that worried about extra hours, I just want louder exhaust but with one that fits

[@miguelgeezy]

Not too sure

[@chrisgomez8485]

I need this for my 2023 se

[@chewbacca11jv2]

Ik damn well someone was in the drivers side that started the car with a key 🔑 bc Se Models aren’t a punch to start you made it look like you turned it on with a key

[@miguelgeezy]

Lol nah man I got push to start and remote start

[@NoEpicness]

21 models come with smart keys

[@omar_9639]

did u do anything other than change the exhaust? also I have a SE nightshade so do I need to get this one or the 19410

[@miguelgeezy]

All I did was add driver side hangers you can get those at the dealership or mechanic shop. And if you don't want to add the hangers the 19410 will fit just gotta switch out the exhaust

[@chuckyh5486]

Do u feel any difference on the driving with it

[@miguelgeezy]

No everything's the same

[@briannegnubu2346]

What is the part nmber on vibrant resonator i wanna get one exactly like yours,thanks

[@marlongreene83]

I just ordered all the parts needed for the driver side besides the four new bolts, do you remember what size bolts you used?

[@miguelgeezy]

I honestly don't. What you can do is just take one out from the right side and go to a hardware store and find it. It's also cheaper than ordering it through toyota themselves. Sorry but I hope this helps!

[@marlongreene83]

@@miguelgeezy I was going to have a buddy of mines do it at his shop I was just hoping to have everything lined up for him. Thanks for the reply

[@miguelgeezy]

@@marlongreene83 I'm sure he'll have the bolt if he has a shop, good luck bro!

[@endlessaddictions1150]

I got the same part number did u not do anything else just the exhaust system for it to sound like that?

[@miguelgeezy]

Yes just exhaust

[@Buckroe]

How did you get the remote start? I was told my 2020 se awd can't have it

[@miguelgeezy]

I think you have it you just can't remote start it from your phone. Just press your lock key 3x on the last press hold it a bit until you see the headlights flashing then you can let go and it'll start.

[@loganhoff5410]

You can get a after market one

[@howardpower]

THat thing sounds like a 4-banger lol.

[@miguelgeezy]

It is haha 😂 getting the v6 next year

[@lightthemeemployee4486]

Will a cat-back exhaust install damage the ecu tuning and give me a check engine light?

[@miguelgeezy]

No check engine man enjoy it!

[@zeroneutral]

You should get a retune, ideally, after swapping exhaust or intake parts.

[@fatmanlike45]

Would this work for a 2021 Toyota Camry se nightshade?

[@miguelgeezy]

Yes nightshade is nothing except an added package. I have the TRD 0ackage so should be good

[@MeloManAce814]

I want to do the same to my 2018 se but how is the noise inside while driving? I do a lot of highway driving and that drone exhaust noise would annoy the hell out of me lol

[@miguelgeezy]

It's not bad if you keep it at a constant speed you mostly hear it when accelerating tbh. Plus I always have music so I hear none at all and my music's at 15 max 25

[@evanharrison1210]

What is the name of the black thing on your trunk like below where the trunk opens

[@miguelgeezy]

This is the SE w the TRD package. So it has TRD accents and even has the 19" wheels that black part also just has TRD on it

[@john80411]

i got a 2021 camry se all i need is the exhaust right?

[@miguelgeezy]

Yes and drivers side hangers

[@jr1566]

I have a Camry 2018 SE and I’m trying to get the same magnaflow, I know u said to look up the parts for the 2018 xse that’s needed but I’m having a hard time finding them. I might be too dumb for this car shit tbh lol can u help a man out 😂

[@miguelgeezy]

Do you have a 4 cyl or V6?

[@jr1566]

@@miguelgeezy 4cyl

[@miguelgeezy]

@@jr1566 www.ebay.com/itm/MagnaFlow-Street-Series-Quad-Catback-Exhaust-Fits-2018-2020-Camry-XSE-2-5-/264648155285?_trksid=p2349624.m46890.l49286 This is the one I got. Fits yours too! Checked it by matching up your car year/engine type

[@jr1566]

@@miguelgeezy nvm I was able to find the hangers (2) , just wondering if that’s all that’s needed

[@JuanRamirez-bj6qe]

Did yours come with the remote start? I just got a 2020 xse v4 and it doesn’t seem to have it lmfao

[@miguelgeezy]

Yeah haha I think every 21 model comes with it now

[@ltcolcapybara]

@@miguelgeezy I got a 2021 SE Nightshade and it didn't have it :-/

[@miguelgeezy]

@@ltcolcapybara press unlock 3 times a day on the 3rd press hold it for like 3 to 4 seconds lights should start flashing and turn on shortly

[@marcomedina7528]

So the quad does fit on the se?? I have the 2019

[@miguelgeezy]

Yes just need drivers side hangers

[@jacobbridgwater7338]

Get Weapon R headers next!

[@miguelgeezy]

Been looking into that tbh!

[@jacobbridgwater7338]

Me too, but there’s no 4 banger Camry with it on KZbin yet. You should get them so I can see if it’s worth it, lol.

[@miguelgeezy]

@@jacobbridgwater7338 LOL 😂😂😂

[@jacobbridgwater7338]

The main thing for me is there’s no tune out for the 4cyl and I don’t want a check engine light.

[@miguelgeezy]

@@jacobbridgwater7338 yeah same, but I am also thinking about getting the V6 next year so might not do too many things to this SE

[@cuddycuh8213]

Do you need extra parts for an Se?

[@miguelgeezy]

Yes drivers side hangers

[@blackgod3703]

So this fits a 2021 Camry se ?

[@miguelgeezy]

Yes

[@mikesevy8464]

Would it be the same for Camry se 2018

[@miguelgeezy]

I'm pretty sure you just need the hangers

[@alextran5978]

will this work with the awd one?

[@miguelgeezy]

It should.

[@jacobbridgwater7338]

Could you share what is needed for the driver side?

[@miguelgeezy]

I ordered part 90105-A0360 (2) , part 17575, and part 17565A (NO. 3) it's just the XSE drivers side hangers

[@cuddycuh8213]

For a 2021 se we need extra parts for that quad exhaust?

[@TheDMatoProductions]

Custom air intake or stock?

[@miguelgeezy]

No air intake, everything stock except for the exhaust.

[@TheDMatoProductions]

And problems or all good so far?

[@TheDMatoProductions]

Any*

[@miguelgeezy]

@@TheDMatoProductions all good so far been over a year. Sorry just saw your comment haha

[@kevinnguyen7044]

how did you get the second exhaust in there

[@miguelgeezy]

Removed the one it came with and I got the MF 19494 just need drivers side hangers

[@zeroneutral]

The SE has a removable plastic piece on the rear bumper to add the XSE dual exhaust. It's missing the heat shield and hangers though.

[@pedromorales8099]

How you put the other exhaust

[@miguelgeezy]

Just needed to buy the hangers and bolts for drivers side

[@urelmancilla6332]

not stock.

[@alpineautomotiveperformanc3185]

Anyone willing to give our 8th gen Camry dual exhaust system a try, test and KZbin review?

[@miguelgeezy]

Would love to!

[@alpineautomotiveperformanc3185]

@@miguelgeezy what state are you in?

[@miguelgeezy]

@@alpineautomotiveperformanc3185 California

[@alpineautomotiveperformanc3185]

We have shipped out several systems to california.

[@miguelgeezy]

@@alpineautomotiveperformanc3185 awesome would love to test out and review your product!

[@michelleaguilera7536]

Please answer

[@daveallen2455]

Who in the world would want to drive around all day in that fart bag ?

[@krazziejrboi]

Easy?

[@miguelgeezy]

Yes just needed the hooks/bolts for the drivers side

[@tuck_you3083]

Audio is fake . I had this same car with the exhaust it doesn’t sound like that .

[@miguelgeezy]

Trippy maybe you installed wrong or something lol but this is 100% real

[@simply-tom]

Imagine if that was the V6 version.

[@miguelgeezy]

Getting that next year 🔥🔥