2021 Yamaha R1 ECU Flash + Dyno Tune

We are FINALLY able to flash the 2021 Yamaha R1 and boy did it make a HUGE difference after it we installed an exhaust and tuned it on the dyno.
Get your ECU Flashed by me.
Call me at 864-608-0119 or www.mooremafia.com/ecu-flashi...
Moore Mafia Drag Racing School
www.mooremafia.com/dragracing...
Moore Mafia Merch
www.mooremafia.com/shop
See some of the performance products we have at:
brocksperformance.com?aff=3
ENTER DISCOUNT CODE MooreMafia5 for a Special Discount!!!!!
To have us make your bike go fast like ours. Just call me
864-244-5447 Tuesday-Saturday 9am-6pm EST
Follow us on Instagram
@chrismooremafia
@bigkountrymooremafia
@mooremafiatuner.beej

[@morley3810]

Those midrange gains really extend front tire life haha.

[@joseungos4948]

So excited. Stopping by the shop tomorrow on my drive home from Florida to Maryland.

[@tylerdeagan2818]

love your work!!!! and absolutely love my cbr1000rr ecu flash from you killers over at moore mafia!!!! keep up the great work and amazing content!!!

[@blueprince2330]

This was the best video on this subject that I've ever watched. Incredibly detailed explanation, thanks for the info.

[@remsangachhakchhuak1738]

My dream bike,so beautiful. Please Moore Mafia make it angrier and deadlier. Make it super fast.

[@jmrS1k24]

you guys insane huge gain !!!

[@kungfukenny4439]

Love the sound of these engines man. Cannot get enough of it. Good job Chris.

[@crookdogg1385]

Damn good HP!! Gota love that

[@SquireSCA]

Dude, that's some serious gains right there. Awesome. I may replace my headers on my Z900RS and have you guys retune it. Mike agreed that the headers are really plugging things up, and there is 8-10hp just sitting there waiting to be unlocked...

[@MrPeteRR299]

That sound ❤️

[@dsmstealth92]

Finally!!! I’ve asked about my 20 R1 before. If I still lived in NC I would have brought it down. I’ve got a two bros exhaust and stock after that

[@terrytaylor424]

Hell yea good job

[@powamoto]

ECU flash = fun times 👍👍✊✊🚀🚀⚡️⚡️

[@Kwaka28]

Cross plane 4 sounds really nice.. great tune mate.. wheelie Monster in mid-range..

[@TEAMWRIGHTEOUS]

Bro... 15hp gain with just a slip-on.... That's skrong💪😎💯

[@franklinwilkerson2061]

And de-cat @ tune. Comes stock w titanium headers.

[@lawnguy5155]

My 3/4 exhaust is ordered. Once I get it installed I will be sending in my ECU.

[@kingrc6865]

Man I love R1's that crossplane crankshaft sound just does something to me all the time 😩🙌🏽🙌🏽

[@steveyork8069]

We need to see Moore of that beastly looking boat,very intrigued.Great gains on the bike.🔥👍

[@jordanlynch6223]

Yes, wonder what it’s got in it?

[@NaveenKumar-eh3dn]

Ooooohhhhh yeeeaahhhh ❤️🔥

[@QuicKurtZX14R]

184 ...before watching..181 I was very close..Good Job !

[@badass1g]

I got my flash done and re installed. The mid range power change was MAJOR!!!. My bike is now a wheelie machine where before it wouldn’t have enough power with my high elevation and me being a heavy guy. My butt dyno can’t feel the top end gains nearly as good as it does the mid range gains but I’ll be racing my buddy soon to see how it fairs. All in all this was BY FARRRR the best bang for buck mod I’ve ever done! Also something he didn’t mention, you can now adjust power modes etc ON THE FLY WHILE ROLLING!!! 🥰🥰🥰🥰 I was pleasantly surprised by that. The second best mod was my sprint p08 air filter. That also made a noticeable power change and for only $100. Get them both together and it’ll be a totally new bike. I’m gonna make a review video soon on my channel so any r1 guys interested subscribe to my channel for r1 mods and content. Thanks chris you rock bro. I’ve talked to him on the phone a few times and his customer service is the best I’ve ever had! A+ 👍

[@TeamMooreMafia]

Thank you sir! Let your friends know about us!

[@badass1g]

@@TeamMooreMafia I def will. I ride with lots of people out here in utah. Thanks again buddy!

[@boombaamboom5]

Great looking bike Not a fan of a chrome pipe with all the black goin on tho

[@chasp_0784]

That’s kind of yoshi in a nutshell, to me they always looks like fake chrome plastic, way brighter than anything.

[@albegt98]

good job man ;-) pity that it is not possible to have my GIXXER 2018 mapped ...

[@FreshRides]

Just sent my GSXS 1000 ECU in to get flashed, can't wait!

[@daveyt4802]

New version coming out. Wonder if CM can flash the new ones. ST version.

[@MattBruzdziak]

I plan on sending in my 06 ZX-10R ecu for flashing. I'm getting rid the PC3 that's on there. Just gotta save up some $$ for it

[@michaelbrill6609]

May as well use the BROCKS sticker since we can't get our hands on his exhaust right now.........LOL

[@AmritGrewal31]

That torque curve seems much smoother than fireblade

[@crisnmaryfam7344]

Stock? Yes. Tuned the Hondas end up butter smooth. Just part of their engineering. Sad they butcher them in the process of passing EPA and SMOG bullshit regulations. Thats what the crap tunes and bullshit throttle input from the factory are all about. Makes the bikes get better MPG and put out less nonsense they test for.

[@jmc2567]

Awesome gains,and sounded a hell of a lot better too.why they make them suddenly drop off at 11,000rpm baffles me,surely even a steady decline would be better,but I suppose it equates to the same outcome,no power,Awesome vid,commentary,sound,editing as usual,thankyou guys for posting,Best wishes to all,from,Auckland,New Zealand,🏍❤🏍⭐🏍👍🙂🙂🙂😉😉😉

[@hphillips7425]

I would be curious to know how much power loss is running with just the header?

[@hiroshiphillipnakamura5358]

Chris, Can you guys do a 2021 Yamaha MT09SP?

[@nk7123]

what would be considered a stage 3 or 4 r1 flash

[@blackbutmild1]

It would be cool if you guys built a Yamaha drag bike and make it competitive. Just something different.

[@alexrolef5958]

something similar (watch 650ib and rocket taxi)

[@SkitPete]

Hahahaha ...

[@kenny.xturbo3315]

There is a drag bike Yamaha R1

[@carviews9866]

What bike yal going with r1 2022 or Suzuki gxsr 1000 2022???

[@theman200831]

That bike looks sick. Not saying that Yoshi is a bad pipe but there's definitely better options out there I think but to each its own. Never the less great bike great video guys.

[@terry.non-ofurbiz3948]

I was waiting on Brooks for the pipe for that bike but they don’t make it for that year of Yamaha so I couldn’t wait no more and that was in my price range but yeah I tried waiting for a brooks.. plus I’m only weighing 150lbs so it did the trick for me..

[@1keykneedeep]

Free up them horses. Nice work

[@alexrolef5958]

On the s1000rr you didn't remove the O2 sensors. In one of the r1 videos you did. why may i ask?

[@delilahzx10r47]

I'm confused was the electronic throttle valve derestricted/ flashed?

[@Wheels2go]

Sooo for a 2023 what exhaust and mods do i need for close to 195

[@ernestwelborn731]

Hello, if I may ask a few questions… I am in the Philippines and I had my 2022 R1M Flashed and Dyno Tuned they made a cat delete link pipe from stainless. The base line power was 163 and after the flash and dyno tune only 173 max power. The bike didn’t really gain much power through the revs but it does seem much smoother power and the QS is much smoother! I asked why not much power gains throughout and they said my pipe choice (kept the stock end can and they custom made a link pipe). If possible, could you provide an opinion please. Thank You 😊 Ernest

[@outquick]

Im looking for less stall @ 20ish mph in 2nd for the constant twisties, The bike is suffocating from 4 catalytic veters in the exhaust. What can i expect from a full Acroprovic n KN air filter n i send u the ecu to flash? Yosi is great on the GSXR but im not liking it on da Yama at all. Catch u next season 🇱🇷🐉localish🐉🇱🇷

[@zozonotfound3151]

hi is posible to flach cbr sc57 2004

[@badass1g]

So when drag racing with a stock tune, would it be faster if shifted at 12k rpm vs redline?

[@garyparietti5124]

Can u please do a rsv4 rr already

[@kboone122]

How about 21 zx10 tune and flash

[@lewisdeclouette6342]

Sounds better

[@pboothus]

can you recommend anybody in the sac, ca area? I need my 18 R1 tuned up.

[@CamboRambo616]

My dream bike ❤️❤️

[@roadglide128]

Man I wish you guys did Harleys I got a beast that's just super restricted and I know if that was your cup of tea I would be so happy. Plenty of amazing tuners out there for harley but I would live to support yall as well

[@cheskys.5910]

They do Harleys, just probably need to bring it in

[@fivespeed3026]

Same here. I am planning on sending my R1 ECU in soon. I’d love to do the same with my FatBob.

[@Deuceblank]

Potato bikes all slow and no go....lol...but pretty though??? Jkjk but seriously they all slow 😄

[@Volatile_moo10]

@@Deuceblank damn not potato bikes😂😂

[@roadglide128]

I miss the potato Years times have changed and yes they are technically slow in comparison but...times have changed street light to street light these m8 motors are nothing to sleep on

[@berdzena8797]

is it possible to change throtile on 100% after 11500% ? mine was same and i changed A/F is norm and..

[@broddrickruffin220]

Any update on the 21 zx10 ecu flash/tune? I’ve been waiting months to witness your greatness with that bike.

[@tysoncott7402]

yeah, brentuning has a flash/hand held tool for flashing the 21 10R

[@broddrickruffin220]

@@tysoncott7402 I seen that. I think Chris only use woolich racing for his ecu flashes. I think BT is the only person who unlocked it and I want to see comparisons across board.

[@leadsled8961]

Other then weight is there really a flow difference with a aftermarket header, factory header very hard to beat on a dyno.

[@jternesto1981]

If I recall it's 1-3hp with only the high end headers.

[@terry.non-ofurbiz3948]

The research I’ve done the 2022 Yamaha R1 put pretty good headers on that year and the gain compared to the $ I would’ve spend didn’t make sense to me.. my bike btw. But those headers are just has good as if I would’ve bought a set .. didn’t make sense to my wallet..

[@dg8062]

I know "zuk" nation doesn't agree but I love that Yamaha crossplane. Already have an mt09, mt10 coming up. Keep them both.

[@robd1859]

I wonder if you could get 200 horsepower 90 lb feet of torque both at the rear wheel with a full titanium exhaust system air filter and removing the catalytic converter with an ECU reflash and full Dyno tune

[@terry.non-ofurbiz3948]

That’s my bike btw! And the research I’ve done those stock headers are pretty close to just as good as if I bought a set.. Yamaha put pretty much the top end headers stock on that year. So the gain and the $ just wasn’t worth it to me..

[@Gunmaker55]

Do more r6’s

[@AlvlUpSavedMyLife]

I’m confused. I thought you only needed one? Why do some people have a PC and dyno tune? Or an ecu flash and dyno tune and a PC!!?

[@alexclawson6107]

👍🏻

[@apriliaguy4life198]

Awesome gains. Are you using the O2 sensors with the new R1 after tuning?

[@BfaltS1K]

If you watched the full video you would see the answer

[@apriliaguy4life198]

@@BfaltS1K Sorry I watched the full video and didn’t exactly what I asked. I saw the sensors could be disabled but didn’t hear if they were. Sorry again if I missed something

[@fivespeed3026]

I think the answer is no.

[@daveyt4802]

I saw bungs in each side of Yosh header. I think they are there but disabled?

[@badass1g]

You remove the 02 sensors once flashed.

[@blmlove3138]

Hey guys I have a quick question I have a 2021 Yamaha R1 with a 3/4 sc project exhaust currently installed with stock map/ecu. I was wondering do I keep the o2 sensor on the bike while I do the flash? Or when do I get rid of them, or if I have to get rid of them at all. Thanks.

[@badass1g]

No you either unplug or remove them. I asked chris directly about this same issue.

[@Thelonewolf1154]

Hey Chris, have you every encounter a R1 with M4 streetslayer (3/4) slip-on?

[@tejaksz]

Could someone explain me, why their numbers are much lower than xplane tuning’s? They claim around 200 whp with a slip on. I mean no offense, just want to understand.

[@randyschmidt19]

Their dyno reads higher. Maybe they manipulate the correction factors? You need to look at baseline vs finished product and don't get hung up on peak hp

[@StayFreshAF]

I saw that busa in the other side of the glass, whats going on with that? Lol

[@SquireSCA]

Dude, I just traded in my zx6r that you flashed, for a 2021 R1 this afternoon. You can flash this once I get the y pipe fitted? Gonna keep stock muffler for looks and just get the Y pipe for now…. Thoughts?

[@TeamMooreMafia]

Yes sir!

[@SquireSCA]

@@TeamMooreMafia Cool, as soon as I get the Y Pipe, I will bring it on up for a flash. Looking forward to it!

[@AIC68]

🤘😈🤘

[@miguelcolon8929]

185

[@excrement8776]

hey chris might be a little off subject of this video, but does your shop sell exhausts? im looking for a full system akrapovic or yoshimura for a 2006 cbr1000rr and im having a hard time finding any. thanks!

[@allgasnobrakes919]

Chris I NEEEEEEEED u to flash my 2012 model brO!!! Plz tell me how I get it too you and I have no idea on how to take the ecu OFF 🤦‍♂️

[@TeamMooreMafia]

All the details are here Www.MooreMafia.com/ecu-flashing-service

[@clubstyleridahd4695]

Have you tuned any of the new 3rd gen sv650?

[@daveyt4802]

He flashed my 2nd gen V-strom. Like to see the SV myself also. Nice things about the smaller bikes, they are much less restricted and don't have the exhaust servo junk either.

[@clubstyleridahd4695]

@@daveyt4802 Did you notice a big power difference after the flash? I can tell that gears 1-3 are limited I'm guessing due to the secondary throttle valve doesn't open all the way. I'm was going to have Chris do it or send it to superbike unlimited.

[@daveyt4802]

Dyno runs are $150 around here with AF. CM does it for $60 I think. Wish it were cheaper round here. Dale Walker has some good SV tuning videos.

[@daveyt4802]

Those things sound awesome on the drag strip with a quick shifter. What octane is recommended? Isn't Graves the sh*t for Yamahas?

[@terry.non-ofurbiz3948]

This bike has the Quick shift in the electric set up.. Up & down..

[@ecc5119]

Synthetic oil needs the temp to prevent deposits. Conventional oil doesn’t need temps over 200 but being performance driven engines will probably need a rebuild before deposits form.

[@WhyDidYTstartThisHandleShit]

THE REAL question.. are you able to control the upper injectors?

[@TeamMooreMafia]

YES

[@benrice6244]

I think moore mafia should build a pro street bike off a r1 I haven't seen one yet even online there's always a first for everything

[@alexventrov6826]

Aftermarket exhaust that's bigger than OEM..... That's not something you see everyday lol. What was Yoshimura thinking.

[@thisguyfromyoutubesaid1537]

How old of bikes do you have ecu flashes already done for? What about a 2006 yamaha fz1?

[@Fearless154]

For older bikes, you can get a power commander.

[@thisguyfromyoutubesaid1537]

@@Fearless154 on a carberated bike?

[@Fearless154]

@@thisguyfromyoutubesaid1537 2006 fz1 is fuel injected and I know there is power commander V available for it. But you don't "tune" the carburated bikes with electronics but by physically tinkering with the carburetor by changing the jet size and needle profile.

[@thisguyfromyoutubesaid1537]

@@Fearless154 ooo okay. So do you think you could send the ecu to this guy with a 2006 fuel injected car?

[@Fearless154]

@@thisguyfromyoutubesaid1537 As I said older models you tune by adding a power commander. Just buy one for your model and it'll have the new maps for your bike which you can switch for your liking if you need the most performance or comfort. Also, you can download new maps.

[@SkitPete]

Tip: 88 deg. Celcius is better...try it

[@mrrandy1]

are you able to update a 2021 BMW 1000SRR?

[@tipenelee]

That's interesting it only develops 164 rear wheel HP in stock trim. I'm sure there someone out there claiming their stock bike produces 200HP lol

[@exothermal.sprocket]

Let's hope the EPA never becomes what they are pushing hard for the ATF to become.

[@daveyt4802]

EPA is coming. California was first, now the rest of the states.

[@exothermal.sprocket]

@@daveyt4802 You giving some kind of self fulfilling prophecy?

[@Charlesbjtown]

Why do all youtubers say "in the comments down below", as if we don't know where the comment section is.

[@jamesbutler7148]

The R1M in the uk says its 198bhp stock why is yours so low ??

[@TeamMooreMafia]

That's rated at the crankshaft

[@juanc8085]

190 hp

[@FlexFast]

200whp is where I'd like to see n r1

[@sparkmotorrad4343]

Things u can't see on ur avarge r1

[@FlexFast]

@@sparkmotorrad4343 it's upsetting all other bikes are there

[@fabienwade27]

@@sparkmotorrad4343 👹👹👹👹👺👺👺👿👿STFU

[@sparkmotorrad4343]

@@FlexFast I love the new look of this r1 but yamaha logic be like: the sound is what it makes it uniq😩

[@sparkmotorrad4343]

@@fabienwade27 have a nice dreams sir🤫

[@crookdogg1385]

Not yosh... Damn!!

[@K-carbon]

Yoshimura make excellent system especially if its made in Japan not America

[@terry.non-ofurbiz3948]

I was waiting on brooks to make a pipe for that bike but couldn’t wait no more . They didn’t know when they were going to come out with one. So that came with the cat-delete pipe all for $700 everywhere else was $700 just for the cat-delete pipe.. If u want to see a better pipe on there I do have cash app… 😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@chaz951]

I'm late but let's try 178 hp

[@anthonyglover7973]

😄😄😄 duh 😆 🤣

[@ravenmoto5948]

With an Akra full system, Im thinking 190HP

[@totalelevator1234]

171 hp

[@totalelevator1234]

Wow more than I thought.

[@terry.non-ofurbiz3948]

If anyone thinks my bike can look or run better with different parts or what not’s lmk I do have cashapp.. just say n.. 😂😂😂 plus that set up fit my budget .. I’m not racing it in Moro GP..

[@MonkeyButtRides]

186mph is all you can go.....🤣😂

[@myname9252]

We want the glorious 200 😂

[@terry.non-ofurbiz3948]

186 will only read on the gages but will keep pulling. I had that bike at 192 and still had more just ran out of real estate.

[@Deuceblank]

Really??????? No straight header pipe braaaap braaaap???? Lol

[@mrrandy1]

1st as always

[@illwil1005]

There’s pretty much no reason to trade my 2015 R1 in for 2020+. I’m spending money on slicks, track days, and a class. Unless you do work in the engine head, you’re not seeing 200whp like the gsxr,s1000, zx10r…

[@mr2scroll538]

Wow no wonder zx10r and s1000rr destroy r1s

[@r1n069]

R1 sounds so good though with that crossplane crank. I will say though the R1 is more of a twisty bike the way the power delivery is.

[@mr2scroll538]

@@r1n069 Tru brother tru

[@MrZoranbebek]

@@r1n069 crank has nothing to do with a sound it is fireing order dude

[@apriliaguy4life198]

Not getting destroyed at track days up here. There’s more to driving out of corners than outright hp.

[@mr2scroll538]

@@apriliaguy4life198 I was talking about roll racing. Thats all we do done here

[@blairakana9984]

This guy sounds like he’s talking with his nose squeezed.

[@redactedrider7606]

That pipe looks way outta place and cheap on a blacked out R1. I know yoshi makes some good stuff, but looks at that monster of a can.

[@elreydavid96]

Oh my god he should have gotten a better exhaust than that all chrome looking yosh 🤮

[@terry.non-ofurbiz3948]

If you research those headers from Yamaha that year is just has good as if I waisting the $ on a set . Just didn’t make sense to my wallet. I wanted a brooks but waited n waited and they didn’t make it so got that pipe couldn’t wait no more .

[@PUT_N_WRK]

This bike sounds terrible.

[@wolfcalibur]

underwhelming numbers.

[@jeffh278]

181rwhp is underwhelming? Get out of here troll. You probably right a huffy

[@lametraserillos1]

is power to wheel no at crank

[@wolfcalibur]

@@jeffh278 not trolling you tool. Ya I ride a huffy, get lost. I ride a real man's bike 14r, that makes just shy of 200whp 116ftq.

[@wolfcalibur]

@@lametraserillos1 I get that, most newer 1000s make 200whp from just an exhaust and flash.

[@lametraserillos1]

@@wolfcalibur every dyno reads different , dont forget ... only the ducati v4r and new honda cbr can do 200 rwhp flashed ... and US bikes and european models have different restrictions ...

[@mustafakhsn48]

Copy of h2r king

[@mycobrahatesyou]

Trump 2024

[@skylinesquid]

Lets go brandon🇺🇸

[@kasewilliams6848]

Why yoshimira exhaust tho 😢