2021 ZX10 REAR FENDER DELETE NO MONEY!!!!

This is a basic delete on a friends bike and he was just going to wait till he got a fender eliminator to put the plate back on and just carry it in his bag. I knew there was something that I could make from the parts I took off and thought that I would give it a go.Of course a professionally made fender eliminator would look better. But this comes at zero cost. This does not cover a tag light.

[@SystemAdministrator1]

Looks clean and flush, nice bike! Cops will hate on the plate mount

[@motorich]

Cops around here hate bikes in general. So... why make it easy on them.

[@jakesantos3154]

Pretty confident in any state, you’re giving them a reason to pull you over for that setup. If you have that nice of a bike, you just to get a fender illuminator. But I give an A+ for creativity. It's always great to have friends with tools.

[@MRR-qv3bw]

I bet he had the same problem that I had when I bought my BMW S1000RR 2020. It was a good 6 to 8 months before someone had a real fender eliminator kit. NRC was the only real option for along time! IT WAS HELL WAITING FOR THE PARTS I WANTED TO BE RELEASED!

[@jakesantos3154]

@@MRR-qv3bw Oh yeah, good call I didn’t even think about that and especially now after all the Covid shut downs getting shit released and made it’s probably even worse. By the way, if that X 14 helmet in your biopic is yours, that thing is badass, bro. That’s the next helmet I want to get.

[@ericzx1074]

Not all heros wear capes. Bought my 22zx10r, hated the diaper in the back. Woke up next morning saw this. Took me 30 min of work since u figured it all out for me.. I stuck pieces of foam in between the bike and the bracket incase of rubbing. Ordered my tst parts. But this is gonna save me a week of riding with a stupid looking plate.

[@RayHarrison1978]

Don’t know why but I fucking love the look of this bike

[@motorich]

you are not the popular opinon. lol

[@kevinmiller7105]

because it’s fucking awesome, have one myself, love it!!

[@ZXBobbyBoy]

Admire your patience. I would have snapped most of those bits.

[@jay46s]

A+ for the innovation... But tst makes it for 60 bux, high, low, and adjustable, biggest thing is the block off portion which hides those screw holes and makes it so much cleaner, and they also got the integrated tail light for 110 bux which is clutch.

[@motorich]

this was when the bike was released and there wasn't anything for it at the time

[@wuhdupd0e347]

The long screw at 2:13 that was taken from the middle section of the side panel was placed on the front end of the panel at 6:07. Hope the vibrations don't cause that shirt screw to pop out of that middle section bro. I pay attention to the small details when I work on things haha. Blame the US NAVY I guess 🤷🏿‍♂️. But on a side note I just picked up my 2021 zx10r today. 💪🏾

[@williamprice1305]

I noticed that too. Also, the little short screw was supposed to go to the front instead of the rear.

[@HemiBurns]

The metal piece that holds down the seat is installed upside down, but I guess it still works that way....lol. I have a 2021 Zx10 also. I wish Kawi came up with a better way with the seat removal....

[@sumerrana6805]

we should put the indicators and licence plate on the rear mudguard, instead of hiding it

[@likkitongue]

Ouch. Hate it when ppl smack screws back in like that with power tools. I'm sure none of those are stripped or cross threaded.

[@motorich]

Lowest setting. For plastics and such. I can stop it with my hand.

[@bmack1000]

I always start them by hand at least 1 turn. Looking for an issue like this.

[@mrmuncheez374]

Pretty crafty to make this work 👍, however one thing to say "NRC tail tidy" FTW! 🔥 Just don't ride at night now without a license plate light.. 😆

[@IvanGarcia-ug7mf]

would've been nice for my baby ninja 400 ... p.s. you have an amazing machine 😎 congrats!

[@motorich]

Wish I could say its mine.

[@lymusic3355]

I’m pretty sure that’s illegal, no one can’t see your plate and cops are going to mess you up cus of this...

[@motorich]

Around this area they mess with us anyways

[@dehradunsbk5151]

kzbin.info/www/bejne/d5W3e6CboZ1-Z9E Check this video then

[@08poochie08]

why do you want someone to see your plate? society is lucky the damn plate is on their in the first place

[@johnnydept4082]

Obviously your not a bike rider

[@michaelsnell6112]

Man that's a lot of work. But I'm sure you are Happy. I had to do a lot of work for my custom rear end

[@MotoloverMLZone]

Absolutely beautiful 😍, kawasaki zx10 2021

[@KioCoan]

Nice video. I just got a new exhaust for my 2022 zx10r, do you have any videos on how to remove the cat? I have a ninja 400 before and was much easier to install a slip-on exhaust.

[@motorich]

Unfortunately I have not had a 22 ZX10 come through for an exhaust just yet.

[@Doogerauoy]

Wow. The way the seat is held in is cumbersome AF. 🤦‍♂️

[@motorich]

Yea. Its not the best design. I am not sure what Kawi was thinking there

[@iwnnafckmthmn]

On my 21 zx6r you put your key in on the back of the bike to unlock the front seat and it just comes off, then the back seat is released by a little pull cord under the front seat

[@MitEclipse91]

Buys a 16 thousand dollar bike and won’t spend 100 dollars on a good fender eliminator.. lol..

[@motorich]

Or there isn't anything out for the bike just yet. ;-)

[@MitEclipse91]

I’d be willing to bet the gen 5 fender eliminators fit it... tail looks the same lol

[@motorich]

You bet the $100 fender eliminator? Seems like a lot of money to waste if it doesn't

[@motorich]

The Gen 5 taillight looks like it will fit too. He was on the fence about ordering an integrated 5th gen taillight and seeing if it would fit. But decided he didn't want to waste the money

[@MitEclipse91]

@@motorich lemme just go measure my gen 5 right now and tell you the gaps and such

[@ninja1970fin]

Where are the signals ?

[@motorich]

I will be installing an integrated taillight once. It comes out for the bike.

[@robertprosser6856]

Gloss black the best colour and we don't get that colour in the UK!😫🤦‍♂️

[@motorich]

Really? Whats the reason you don't get the color?

[@robertprosser6856]

@@motorich Kawasaki send some same colours and different colours to the USA and Europe but here in the UK Kawasaki aren't offering the gloss black that you get in America😭

[@tankmanzwotblitz15]

I got matte black last month in India

[@mikedyniin3102]

This bike is soo sick... It looks like the terminator

[@kboone122]

Because it will terminate all comers

[@Benjay1975]

dude, check out mustard tidy tails, they are the best imho

[@motorich]

The owner of the bike is waiting for something that he likes to surface. This was just to get him by as he was going to ride without a tag at all.

[@faint442008]

Watching this makes me like the 2020 even better. You don't have to take off nearly as much to take the tail off. The rear is just one piece

[@quintonayaan4576]

you all probably dont care but does anybody know a tool to log back into an Instagram account..? I was stupid lost the password. I would appreciate any assistance you can offer me.

[@luciankendrick6642]

@Quinton Ayaan instablaster =)

[@quintonayaan4576]

@Lucian Kendrick Thanks for your reply. I got to the site through google and Im in the hacking process now. Seems to take a while so I will get back to you later with my results.

[@quintonayaan4576]

@Lucian Kendrick It worked and I actually got access to my account again. I am so happy:D Thank you so much you really help me out!

[@luciankendrick6642]

@Quinton Ayaan glad I could help :)

[@verdeboyo]

No!!! Needs to look trick! not TRASH! On a brand new 2021 bike too😲😂 Most def illegal which ever way you want to dress it👎🏻

[@motorich]

When something comes out specifically for the bike. It will be installed along with an integrated taillight

[@verdeboyo]

@@motorich good to hear. It will look super badass with the right bits on. To be honest I would have done what you did as soon as receiving the bike cos those big old plastic bits are made for the bin

[@LastStarQuester]

I swear I just bought this same motorcycle from a dealer here in Utah. It has that same plate bracket on it and everything. Did your friend sell or trade it in somewhere?

[@motorich]

Nope, he still has his in Cali. Highly modded now

[@LastStarQuester]

@@motorich ah. My bike is literally the same color and everything so I was like whoa, did I buy it.

[@va.greenthumb7579]

I thought u just used a hacksaw? I’ve been doing it wrong this whole time 😂

[@MadDroneRacing]

👍

[@opadilla123]

Nice ticket magnet

[@alanjalel]

So you just going to turn without turning signals?

[@motorich]

In our state it is not required. You can use hand signals

[@grim2987]

No signal lights ???

[@marcb4166]

Wonder if it threw a code light?

[@motorich]

no code lights

[@hieupooentrosang876]

OK hay

[@ragnaheathen7811]

Have you had any problem throwing code's when u did the turn signal delete

[@motorich]

I haven't heard anything like that from the owner

[@ragnaheathen7811]

@@motorich ok thank you

[@mrgaijin128]

Link for the kit please?

[@OnlyGodCanJudge79]

Do the turn signals work after that

[@motorich]

The removed signals? At the time of this video. There was no integrated taillight or tidy tail available. The bike has sense gotten an integrated taillight

[@OnlyGodCanJudge79]

@@motorich can u post how u put new tail and lights on please thanks

[@two_wheels.traveller]

Any error Show up on tft screen after this ?

[@motorich]

None that I have been made aware of

[@brianbrooks5947]

Can you tell me what todo about my break light being stuck on now

[@rada70]

No signals and no license plate light??? Seriously??

[@Bob_Jones123]

What people don't realize is THIS is why cops want to pull you over. Having a plate angled upward like that is as bad as not having any plate at all.

[@motorich]

Yes and no. But thats what he wanted

[@MrGoofySir]

Does this void the warranty?

[@true2278]

Nice bick

[@fs3994]

$17k bike and can't afford fender eliminator?

[@motorich]

He asked me to remove it. I made the temp tag holder by choice. Fender delete, integrated taillight, and full exhaust are on the way.

[@neilgouws6962]

Seriously, this bike just got launched... Do you really think there is a warehouse full of aftermarket spares , just waiting?!

[@landriaspicolibeeks-johnso8045]

Buy a fender eliminator, won't be following this example

[@motorich]

He plans to. But wanted the fender gone the day he got it. So... I made something for him. And still stand by it looks better than stock

[@landriaspicolibeeks-johnso8045]

Looking forward to the next steps

[@dehradunsbk5151]

kzbin.info/www/bejne/d5W3e6CboZ1-Z9E

[@bradjean4486]

What the fuck thats a pain in the ass compared to my 2019 ...newer isn't always better

[@Ronycoolman00]

Bush mechanic 🤣

[@ronboling271]

Just buy the kit .. looks like shit

[@felipecampo3032]

Que cochinada de arreglo, no saben lo que es un defender 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

[@valdeibarbosa7670]

🤮