2022-2024 MDX OEM Trailer Hitch/Harness/Cover DIY Installation

[@Pens4Life85]

Got it done tonight!! No joke, the replacement bumper piece took FOREVER!!!

[@SteveChenFishing]

Not that easy 😎

[@jesusalvarado323]

This video saved me a lot of money! Dealer here in Los angeles, CA was charging me $1300 for parts and labor. Ended up purchasing parts for bout $400 and followed ur video.. it took my son and I about less than 1 1/2 hrs

[@SteveChenFishing]

Nice so glad to see it helps!!! Where are you in CA? I might be moving to Bay Area very soon.

[@SteveChenFishing]

My bad I saw you’re in LA. Haha enjoy your MDX!

[@Pens4Life85]

Did the bumper piece take you the longest, like me?!?!

[@SteveChenFishing]

@@Pens4Life85 I think putting the new bumper piece back on, like you...

[@arabellewestfalia4045]

Thank you so much for a detailed video! I didn’t even look at the instructions just followed your instructions.

[@SteveChenFishing]

Glad to be helpful 😎

[@royramdas7298]

You are the Man. Thank You

[@SteveChenFishing]

Thanks for watching!

[@AngieCannon-y8z]

Thank you so much for sharing this, it gave my husband the information and confidence to do this at home! He bought the entire hitch, wiring and factory trim cover from Genuine Acura Parts Hub for 30% off MSRP. (Sale price $468) Shipping from Weir Canyon, California to Florida was $93! Your step by step video was better than an instruction manual!

[@SteveChenFishing]

Thx glad to see that it helps 😎 enjoy the MDX!

[@SWAGXICAN100]

Steve thank you good sir for this great video. I just purchased a 23 MDX ASPEC I been looking into purchasing this kit and not pay the stealership 😅 I’m a DIY myself with your video I am feeling confident so thanks again.

[@SteveChenFishing]

Hi thanks for watching! I really don't like the stearlership, and I thought having this video online will encourage more people to DIY and avoid the unreasonably high cost of installation fee at stealership 😎

[@HamishtheHaggis]

Just bought a 2025. Acura Canada wants $2780 for the 3500lbs hitch installed. Insane! Great vid!

[@SteveChenFishing]

Great to see people can save money DIY 😎 cheers!

[@JohnReuss]

Thanks for the video. I just finished my 2023 Advanced hook up. I never would have stuck with the cutting up and replacing the kick sensor without this video. I had to cut off 50% of the right side of the sensor bracket and shove the main sensor block way to the left but it works! Thanks again.

[@SteveChenFishing]

Thanks John for watching, glad to be helpful. Enjoy your MDX!

[@00Stoneman00]

I am about to do the same install as you (with the kick sensor). I was just thinking...okay, I'm going to have to cut this sensor bracket. Glad my instincts were correct. Any tips regarding that aspect of the install would be greatly appreciated. Thanks!

[@SteveChenFishing]

@@00Stoneman00 no idea on that sorry bro…

[@00Stoneman00]

@@SteveChenFishingHey, thanks anyway for responding.

[@chko]

Very detailed and helpful video

[@SteveChenFishing]

Thanks, glad to be helpful

[@Vietninja]

Great video brother! I enjoy the part where you made sure the tube from the harness was secured between the rubber gap for both sides. Amazing 🤝🤝

[@SteveChenFishing]

Thx bro for watching!!! Happy July 4th!

[@robertshaw244]

Fantastic video....great detail ...and a swiss army knife has many uses!! Thanks so much.

[@SteveChenFishing]

Thx for watching! Enjoy your MDX!

[@lrblouie]

Your video was very helpful! I have a 2024 Honda Pilot Trailsport. Although the MDX is a bit different (and the Pilot already had the hitch frame installed), your video gave me all I needed to get started and figure out things along the way. Really appreciate it!!!

[@SteveChenFishing]

Glad to be helpful! Congrats on your successful installation!!!

[@SwordofTheMorningg]

This was so helpful, you are the man! Thanks for making this excellent video 😊. I was able to install my hitch and harness flawlessly.

[@SteveChenFishing]

Glad to hear that! Enjoy your MDX!!!

[@mikezupancic2182]

Awesome video thank you. Just got a 22 A-Spec and want to add a hitch.

[@SteveChenFishing]

Thx for watching hope you enjoy it!

[@mikezupancic2182]

@SteveChenFishing yes I did. The instructions for the hitch show taking off the entire bumper. Your method requires some patience but will result in less possible damage.

[@SteveChenFishing]

@@mikezupancic2182that’s right. I don’t want to cause more trouble by removing that big piece.

[@edciechon67]

This video was a HUGE help, thank you!!

[@SteveChenFishing]

Thx for watching, glad to be helpful 😎

[@cgj0198]

Thank You! Your video was very very very helpful!

[@SteveChenFishing]

Glad to be helpful! Enjoy your MDX!

[@andyniebla1998]

Hi awesome video! My wire only came with one rely I bought my part at the dealer. Any idea why that may be?

[@SteveChenFishing]

Hi thx for watching. Did you check the part number? Does it match the one shown in description section?

[@timbui5556]

Wonderful instructional video. Very clear. How long did it take to do a complete job? Thank you

[@SteveChenFishing]

About 3 hrs. With my video I think it’s less time. Like if I do it again, 1.5-2 hrs maxz

[@kolbrob]

Great video, Steve! Is there any way to "test" that the wiring harness is actually working without a trailer or boat? I don't want to find out it's not working in a few months when I rent a U-haul trailer and the lights aren't working. Thanks!

[@SteveChenFishing]

Check with a multimeter, it's voltage based. Check the voltage between pins, online sources show which pins are supposed for braking/turning, etc. Good luck.

[@JimPerkins-k6j]

Great video! I was about to scratch the MDX from my shopping list because of cost and I could not find a picture of what it looked like installed. Did you purchase parts through dealer or somewhere else?

[@SteveChenFishing]

I think I have the part number and link in the description. Find the OEM pieces online is my recommendation.

[@ssokol91]

Do I really need the harness if I am only planning to use the hitch for a bike rack? Thanks! Great video!

[@SteveChenFishing]

Based on my knowledge, no need for harness. But pls check relevant regulations.

[@rickgaudreau7111]

Great job on the video, step-by-step instruction was fantastic. I have a question, if you needed to install an electric trailer brake controller in the MDX, are the required wires or the wire harness already located under the dash somewhere in the vehicle? Thx.

[@SteveChenFishing]

Wire harness has 6 pins, which includes braking. I think so but don’t quote me on that 😉

[@ThangNguyenCA]

Hi, This was so helpful, did you do for Hand free access sensor?

[@SteveChenFishing]

Not really, my car is the base trim. Thx for watching!

[@ThomasUSofA]

Hello sir, your video is VERY helpful as I'm considering buying the base 2024 MDX as well and only need 3,500 lbs. of tow capacity (so no ATF cooler needed.) I'd prefer to do this myself and the dealer's charge would be too high in my view anyway. A few questions, as info on the internet for towing with an MDX seems to be scarce. 1. What is the hitch height, to the top of the receiver tube? 2. How well do you find that the MDX tows your boat, and how large/heavy is it? 3. As a more general question, have you been happy with the base trim? Thanks much for making the video!

[@SteveChenFishing]

Hi Thomas, thx for watching. 1. 17 inches 2. Haven’t tried towing yet. Not supposed to tow within the first 600 miles. Planning to tow 2000-3000 lbs with it. I have ATF cooler installed just want to have some safe margin. I wouldn’t tow 3000 lbs without ATF cooler. 3. I’m pretty happy. Just the fuel economy… but you can’t get good fuel economy with a capable towing vehicle anyway. Hope this helps.

[@ThomasUSofA]

@@SteveChenFishing Thanks again, and happy fishing!

[@path6598]

Good job, thanks for making this video tutorial.

[@SteveChenFishing]

Thx for watching 😎

[@wrinkleneckbass]

Great video. I thought a cable had to be run from the battery back to the wiring harness, but it looks like Acura already did that for us. I was thinking about getting a Curt hitch but I like the way the OEM hitch sits higher up and is covered by that replacement panel.

[@SteveChenFishing]

yea the higher up position and integrated look was the reason I chose the OEM piece. It makes a difference for launching a boat.

[@JackHeinitz]

directions were great and everything was going great to the outter planel reinstall. My panel doesnt fit. it doesnt go around the hitch or the plug. Do you have to order a different panel then the factory pane?

[@SteveChenFishing]

Yes a separate part has to be purchased, with pre-cut holes to accommodate the hitch and harness. 08L92-TYA-200B (trailer hitch cover)

[@PaulMurphy-y4n]

Thanks where did you get instructions from.

[@SteveChenFishing]

acurazine.com/forums/4g-mdx-2022-472/2022-acura-mdx-model-series-accessory-installation-instructions-992091/

[@Pens4Life85]

​@@SteveChenFishing dead links for general public

[@jesusalvarado323]

Did you torque down the 6 bolts holding the trailer hitch ? If so what is the torque specification.?

[@SteveChenFishing]

According to the instructions: Tighten the six flange bolts to an initial torque of 32 Ib-ft (43 N·m) as shown. Then, tighten the bolts to a final torque of 63 Ib-ft (85 N·m).

[@cap10ray]

Just checking that the 08L91-200 is the correct part number because the Acurapartsforless web site says "This part does not fit your 2024 Acura MDX" . I have a 2024 MDX SH-AWD

[@SteveChenFishing]

Hi, 08L91-TYA-200 works perfectly on my car. it's a 7 pin receiver.

[@OscarHPagan]

Will this work on a 2025 MDX? Thanks

[@SteveChenFishing]

As long as it’s the same gen and no major change it should work. Pls double check if everything look the same as in the video.

[@Walt1960]

Very helpful, thanks.👍

[@SteveChenFishing]

Thanks for watching bro

[@VIk1729]

Is this same for the type S model?

[@SteveChenFishing]

I think for those without hands free access it should be the same... pls double check...

[@Rybakevich]

Where did you order these parts? Thanks

[@SteveChenFishing]

Hi I searched from these two websites, shipping I paid less than $100, I noticed parts were shipped from a local dealer actually. Shipping fees vary basing on your zip code. You may compare between the two and get the cheaper one, good luck! Enjoy your DIY! acura.oempartsonline.com/ www.acurapartsforless.com/

[@Rybakevich]

@@SteveChenFishing Thank you very much!!!!

[@eightfourfour]

Where did you order the parts? Thank you.

[@SteveChenFishing]

Hi I searched from these two websites, shipping I paid less than $100, I noticed parts were shipped from a local dealer actually. Shipping fees vary basing on your zip code. You may compare between the two and get the cheaper one, good luck! Enjoy your DIY! acura.oempartsonline.com/ www.acurapartsforless.com/

[@PaulMurphy-y4n]

Great video where did you get the parts from, and did you pay a high shipping cost.

[@SteveChenFishing]

Hi I searched from these two websites, shipping I paid less than $100, I noticed parts were shipped from a local dealer actually. Shipping fees vary basing on your zip code. You may compare between the two and get the cheaper one, good luck! Enjoy your DIY! acura.oempartsonline.com/ www.acurapartsforless.com/

[@JasonLove-w4z]

Where did you purchase the 7-pin to 4-pin converter ?

[@SteveChenFishing]

Hi there, Amazon link: amzn.to/473Bm87

[@Rybakevich]

Thank you very much!!!!!!!!!!!!!!!

[@SteveChenFishing]

You're welcome, thanks for watching!

[@randylundquist8816]

Do you know if the brake controller works?

[@SteveChenFishing]

I have no way to test it… I don’t have trailers with brakes…

[@robertxu2002]

Can you share the parts number?

[@SteveChenFishing]

Hi bro, thx for watching. It’s in the description section.

[@royramdas7298]

Please check the weight of your trailer you might have to install a transmission cooler

[@SteveChenFishing]

I have it installed by dealer. Good info!!!

[@sudawxj]

回来了？

[@SteveChenFishing]

回来了😎

[@Pens4Life85]

Slick!! How/where'd you buy everything from? Only from dealership?? 2:45 NOT the right tool for the job!!! JFC, gonna cut your damn hand off. Just go get a flathead screwdriver

[@SteveChenFishing]

Agreed on the wrong tool😝 from two online stores I’ll post link in the description. Thx for watching!

[@Pens4Life85]

@@SteveChenFishing awesome thanks! Despite the tool snafu, a very good video. I want to add this to my wife's '23 MDX A-Spec. Did you have Acura do any engine or system modification for towing? Engine cooling or brake system or anything like that?

[@SteveChenFishing]

@@Pens4Life85 ATF cooler, installed at dealer, parts+labor $1100. I checked how to DIY it, didn't want to spend that time...

[@SteveChenFishing]

I just realized the A spec might have hand free sensor on the back so the installation is a bit more complicated… you can find the pdf instructions online.

[@Pens4Life85]

@@SteveChenFishing our A-Spec at least doesn't have that, seemed gimmicky to me. My wife said that's specific to the Tech Package? Either way, I don't F'ing know 😀🤷🏼‍♂️ This was a great video. I'm pretty peeved though about shipping rates for all the necessary OEM hardware. It's like $180-$200, that's BS. Adds an extra like 35-40% to the bil. Nonsense!

[@KorHiOfficial]

Great video!

[@SteveChenFishing]

Thx for watching 😎