Big thanks to DHM for the tuning solution for my 2022 Grom!
@whitehammeer3 жыл бұрын
I sure do love these videos on the new 2022 Grom. Please keep them coming!!!!!!
@TTorres11833 жыл бұрын
I’ll keep’em coming!
@its_boodry23093 жыл бұрын
I'd recommend changing the design of your keychains to the Honda wing design, considering the H design is more towards their cars while the wing design is more towards their motorcycles. very informative video though! the Grom is coming together nicely
@TTorres11833 жыл бұрын
Thanks for the advice!
@davemorris67473 жыл бұрын
I went for Oberon bar end mirrors on my quad. Great quality and have lasted 8 years with no corrosion.
@TTorres11833 жыл бұрын
I’ll check them out
@SeanJawn3 жыл бұрын
Great content, I’m still waiting for my 2022 grom but your videos help a lot for future plans 🙌
@TTorres11833 жыл бұрын
I hope you get it soon!
@terryoler19352 жыл бұрын
After the retuning I imagine fuel economy is reduced. Richer fuel consumption?
@demoonlee7 күн бұрын
Hi, if I accidentally reset the ECU will DHM help me reprogram it again?
@rockybettas58393 жыл бұрын
I see you are shakin and bakin!! So as for mods on what I personally started off with on my grom is... Pro Taper SE Honda mini bars Chimera quick action throttle Whatever grips YOU like Womet-Tech Shorty levers, don't cheap out on levers TST integrated taillight + their fender eliminator is the cleanest on the market ATM Flush mount front turn signals because nobody sees you anyways lol Flasher relay TST axle sliders TST spooled captive chain adjuster I dont use mirrors so cant help ya in that department Those are like the basic, fairly easy and quick mods to get you started IMO and you can get like a different color oil cap and cosmetic doo dads Other than intake/exhaust/ECU you can get a handbrake and subcage? If you're into that sorta thing Chimera makes a clutch spring kit I think is what its called. There is vids on it Hope this helps! Ride safe my man
@TTorres11833 жыл бұрын
Thanks for the nice write up! So many things I have planned to have done to my bike.
@williamkazynski6153 жыл бұрын
I have the same color grom as you. Mine is equip. W/ stock bars,renthal 1/2 waffle gripes, Two Bro. Pegz,speed metal bar-end mirrors. And a Rossimoto pipe, hardliners hourmeterw/99 Miles/5 hours.
@TTorres11833 жыл бұрын
Nice setup
@tyronetyrone70012 жыл бұрын
Great video! This was extremely helpful! I’m removing my ECU and sending it into DHM, while my exhaust will arrive in a couple days. Is it ok to leave the ground undone until I’m ready to reinstall everything? Bike will be down a few days
@TTorres11832 жыл бұрын
Yup, everything will be fine.
@PropDusting2 жыл бұрын
What did the intake, exhaust, and tune do for the speed on the Grom?
@nyc69863 жыл бұрын
KLX 110 bars work nice the 7/8 size and Amazon mirrors aren’t bad there like 20$ and go on your bar ends that’s what I have
@TTorres11833 жыл бұрын
Great, I need bar end mirrors!
@SimplyKelp2 жыл бұрын
Question. What is the difference between a ecu flash and a ecu reset?
@TTorres11832 жыл бұрын
Flash is a new tune for power mods etc…
@SimplyKelp2 жыл бұрын
@@TTorres1183 Thank you very much sir 🙏
@michaelcoley93603 жыл бұрын
Full send!! Just straight pipe it lol
@TTorres11833 жыл бұрын
Lol
@matthewdinse2 жыл бұрын
I just added the Yoshimura exhaust to my 2022 Grom and it seems to be running quite well. I have not done any to the ECU. Should I have mine sent off to have it adjusted. Since added the exhaust I noticed a bit more smell to the bike could it be running to rich now?
@TTorres11832 жыл бұрын
Plan on adding any other performance mods?
@matthewdinse2 жыл бұрын
@@TTorres1183 probaly the air intake not sure where else to go there. I’m kinda new to this stuff so the simpler the better for me lol
@TTorres11832 жыл бұрын
Intake paired with that exhaust is a good start. I’d get a DHM tune after the intake install.
@matthewdinse2 жыл бұрын
@@TTorres1183 ok I think I saw them online can you give me more info on that
@TTorres11832 жыл бұрын
www.dhmotoring.com
@hondamotorsrider2 ай бұрын
It's pronounced "KI-Mare-uh", like the creature.
@bigandfluffy2000 Жыл бұрын
chimera is pronounced Ky-merr-uh.. honestly I googled the pronunciation and it says in the US it's Shi-Merr-Uh and ive legitimately never heard it pronounced like that 🤣
@TTorres1183 Жыл бұрын
😂
@keithcring8011 Жыл бұрын
That’s a mail order tune. nothing custom about it.