2022 Honda Grom (DHM, Chimera Upgrades)

It's finally time to add more upgrades to our 2022 Grom SP. This video is number two in the “2022 Grom SP Series”. In this video I add a DHM Cam, ECU Flash, and Chimera intake. I also deal with the infamous harness extension issue that the chimera intake tends to have. (Helpful if the bike is throwing a check engine light after install.) Last I reset the ECU and TPS sensors and take it for a ride. Watch to see how much was gained after install!
#Honda #Grom #tylertaughtme #2022 #minibike #125cc #DHM #Chimera #yoshimura

[@familygromscarsfun3896]

Really cool seeing that you made a few changes and it now tops out at 75. sick! i bet the low end has a bit more torque

[@cookingwithchris7212]

Nice ! I have a stock 22 minus a yoshi pipe and so far at a full tuck I’ve been able to hit 70 before letting off the throttle .

[@raimondspadaro8211]

Dude, your background music is awesome!!

[@cu3v298]

I hope you post the man in the box intake review soon so curious

[@cu3v298]

Just got my man in the box intake today waiting for the DHM cam to come back in stock with the sprocket so I can order them and send my ecu in to get flashed for it

[@JP-dn8lo]

hey dude I’m impressed how much stuff you know & do on your own! I ordered a 23 grom(first one) and it should be in any day! I’m out of Charlotte NC. Any chance if brought you my bike you would be interested in working on some mods?! If so hit me up!!

[@sicnarf2000]

great informative video. if i can have one constructive criticism the audio level difference between your voice and the music could use some work, had to keep adjusting my volume. but otherwise great video thank you!

[@dbones82]

You don't need to reset if ECU was flashed for upgrades

[@vincentdinh9802]

Hey Tyler sick vid. Did you just wiggle around the wires in the IAT extension and then reset the ECM to clear your Check Engine?

[@tylertaughtme]

I took them out and reinserted them in the extension. They just werent in there all the way when I got it.

[@johnniephelan]

I had the same problem, very frustrating. But once plugged in correctly…. It’s been flawless.

[@T0DDS]

Did you leave the baffle in the Yoshi, or did you take it out? Is it obnoxiously loud?

[@Image-X]

Looking good. I’m going with the MNMTHBX Mtake V3 to go with the dual Yosh I ordered. May have to do the cam ad well. How are you liking it?

[@tylertaughtme]

I like it so far. I am going to do a chimera vs Mnnthbx when I get it in.

[@tylertaughtme]

Mnnthbx video is up.

[@Image-X]

@@tylertaughtme Good deal. I’ve had mine installed for a few weeks now.

[@whitehammeer]

So out of them both which one would you recommend for the air intake??

[@tylertaughtme]

@@whitehammeer watch the video I made titled Mnnthbx vs Chimera

[@johnriley8713]

Woah, great tutorial. What's the key mod to get to 75MPH (or is it a little of all of em)? How to the wheels and suspension hold up at that speed?

[@tylertaughtme]

Definitely a cam, intake, exhaust and ecu flash. Ill be posting the newest video with the Mnnthbx intake tomorrow!

[@ryancao5989]

What helmet you wearing? And when is your MNMTHBX intake video coming out? Thank

[@tylertaughtme]

Mnnthbx vs chimera dropping tonight! And its a helmet I imported from Germany.

[@SergioCortez]

Can you post links to the special tools you used?

[@mattMcLovinisbae]

vroooom

[@bakotako]

Err i have exhaust and intake upgrades and dhm ecu flash. ive been running this for about a year and with about 70mph top speed. i actually did not reset the ecu when i got everything together. do you think i should reset the ecu?

[@tylertaughtme]

They say it dosent matter but it wont hurt if you do. I just do it incase. If you are hitting 70mph it sounds like everything is working fine. If you are a bigger dude it will slow you down some. Not sure how much you weigh but if you start getting over 180 and closer to 200 you probably wont hit 75 with the same mods.

[@bakotako]

@@tylertaughtme ok ill give it a go as i think DHM is in Florida at like 0 elevation and im in Wisconsin with 1265 feet. im pretty small like 137lb and i have an universal windshield that does help with the speed. it also lets you mimic a full tuck with about a 45 degree tuck, which is more realistic for any ride. like i was gonna stop with these mods as imo anything more would require way too much money for a couple of mphs and i was hoping Kawasaki would come out with their ZX4R this spring. but it looks like the ZX4R is coming late 2023 or a troll. i got pulled out on late last season and just got the bike back from inspection so I might use the whole repair thing to put another mod (mebe cam) into it to get lower 70s (like 73 max would be nice).

[@marvincastro6538]

I see that ODU shirt you from VA?

[@DriesOG]

You want the valves at .003? DHM says to do .005 for both valves with the paper sent home with the new cam?

[@tylertaughtme]

Weird, just double checked and the paper that came with my DHM cam says .003

[@DriesOG]

@@tylertaughtme That is definitely strange, Mine says set both to .005

[@chubbschannel3885]

Sprocket changes in the future?

[@ashokkarnik9408]

I have question what do you do turn signal light

[@IroncladTactical]

Pretty cool! Have you GPS'd it to see how far off the speedo is from the factory and how fast it said your top speed is compared to the speedo?

[@tylertaughtme]

None of the upgrades in this video will affect the speedo. However if I changed sprockets that would changed the speedo reading but I do not plan on doing that.

[@heretodaygone2morrowrving231]

Wow how you know how to do that amazing whats next? Change some sprockets out get better top end

[@Mortiz350]

Why would you need to short it out after you already flashed the ecu?

[@tylertaughtme]

I would say to make sure no engine lights come on and if they did it would clear them. The “flash” is updating the map and Ive always heard and been told that reseting the entire thing is good to do when you install a newly flashed ecu. A lot of people say it isn’t necessary for everything to be re synced with the new map. So you dont have to do it and its probably not like manual procedure but I mainly do it just to give it a clean slate to start from after a mod.

[@bfarm44]

That’s a long turnaround for the re flash and they probably sent you someone else’s if it came back damaged and yours wasn’t

[@tylertaughtme]

The long wait was Mnnthbx not dhm. And I am still waiting on Mnnthbx thats why I got the Chimera… Dhm turned it around in less than a week. I think it was damaged in shipping.

[@rafaelrivera8057]

How much did the upgrades go for?

[@rafaelrivera8057]

I'm getting 68, with close to stock

[@tylertaughtme]

Idk now its been a year but probably like $1200

[@alejandroarias6481]

hello, could you make videos trying to start the motorcycle with the kick and don't turn it on, don't start it, kick it many times without a helmet and if you can barefoot or in flip flopshello, could you make videos trying to start the motorcycle with the kick and don't turn it on, don't start it, kick it many times without a helmet and if you can barefoot or in flip flops

[@paulmckinnon6224]

Wa with the stupid music 🎶