2022 Kawasaki Ninja ZX-10R | ECU FLASH Screen Blinking FIXED

2022 Kawasaki ninja Zx10r after ecu flash screen blinking fixed

[@zeehly]

Thanks heaps. I didn’t exactly follow it to a tee but stumbled upon the same result. I did do the off and ons a few times but didn’t wait the prescribed times. However I took the bike around the block a twice just at leisurely pace. Dash was still flashing post ride with the same errors as yours but miraculously they all cleared overnight after a cool off, including engine and abs lights. Subsequently went for a proper run the following day and now it is the litre bike it was always meant to be. The Woolrich flash is plenty enough for me with proper throttle action/response. Revs clean, no pinging and not overly poppy on decel either, just enough. Thanks for sharing your solution.

[@akarjmotovlog432]

thank you bro so help for me😎

[@dennisphen13]

😂 uploaded a video for questions people would’ve had doing this process with you..stay woke king

[@HemiBurns]

Good to know.

[@227giorgio]

So I just did this. The paperwork told me the steps u said so good job. But I just went to a shop 10 miles away and cooled the bike down turn keys on and check engine light and all is off

[@user-vi1sx7we2d]

I had my 2024 zx10R flashed by 2wdw in Washington I live in Spokane my screen was flashing just like it is in this video the instructions in this video did not work for the flash I had however the bike did start and idle and run just fine it was only after 3 rides brought up to temp each ride the screen flashing stopped all on its own and the bike is an absolute monster with the M4 GP19 3/4 slip on exhaust

[@jt_zx10r51]

When the blinking stop, would u able go above 50mph without the blinking coming back?

[@Peanutbutterjelly00]

Mine flashes like that but the engine doesn't even turn now.

[@reeferaddickt66]

If the process in the video doesn't work, this is what worked for mine. 1. Turn on the ignition switch and start the engine. 2. Keep the idling speed more than 30 seconds. 3. Run the vehicle more than 5 minutes at a speed of 40 km/h (25 mph) or more. Be sure to keep the engine running during procedures 2 and 3 for more than 10 minutes in total. 4. Turn the ignition switch off. 5. Repeat the above procedures 3 times. 6. Start the engine and check that the yellow engine warning indicator light (LED) goes off.

[@rada70]

Didn’t work

[@nickherrick5728]

This video is low key terrible lol.