Big update on the bike. First clip got lost when I was dropping the bike off at DC Cycles and Racing. Great results so far. Update to come on risers. Check out David's work at: www.dccycleand...
Пікірлер: 212
@skeggst29572 жыл бұрын
Sorry guys the clip of me dropping the bike off at DC Cycle and Racing got corrupted. I also misspoke saying the bike topped out at 128mph stock. They are limited at 120mph from the factory.
@bradhardy26292 жыл бұрын
My 25 yr. old Honda is limited to about 130 mph. need a power commander . and open air box .
@skeggst29572 жыл бұрын
@@bradhardy2629 What model Honda?
@bradhardy26292 жыл бұрын
@@skeggst2957 Valkyrie . We also have a guy here in Minnesota that does super Charger up grades for them & Harley's.
@koolkat86392 жыл бұрын
Whaaat no way, I got my 107c streetbob to go 125mph , and I was forced to slow down because of speed wobbles. I would imagine Your 117 should go past 120mph no problem.
@brianbutler3072 жыл бұрын
@@koolkat8639 nope. Electronically limited at 120.
@tommyjusz2 жыл бұрын
Finally someone tell you what they paid. I appreciate the transparency
@daveatkinson42012 жыл бұрын
That sounds great and I agree the longer pipe looks great and nice seat choice
@waydel1 Жыл бұрын
Agreed the longer pipe looks better I also have lowrider st and can’t wait to get a pipe. S&S you can’t go wrong. Thanks for your video and be safe out on the road.
@jetme88153 ай бұрын
Nice looking bud. I agree with all of your reasons to go with S&S. Plus the Woods cam.
@frankzepeda63072 жыл бұрын
Just got my ST last Saturday love the channel and definitely like allot of the mods.
@lozada1971 Жыл бұрын
I have the same set up but with S&S550 cam. My TQ is 129 and my HP is 119 but at 3700 rpm. Your power at the lower RPM is what I wanted. I wish I would have done the 22XE. Great set up. 👍
@a.j.13279 ай бұрын
@lozada1971 Saw your short videos on your channel, and they sound awesome man. Very mean and aggresive! But if I understand correctly, the S&S550 is more a high RPM cam and the Woods 22XE a low rpm. I havent Made a decision yet for what cam I should go with. Too many options! Ps I also have the s&s 2-1 on my fxlrst.
@hiesenbergwalt1812 жыл бұрын
I have exactly the same bike .. stage 2 was done at Rosa’s Huntington NY
@davidcastle202 жыл бұрын
Did the same cam. 22xe power band is they way to go on this bike without a doubt. This thing rips
@robertyoung5678 Жыл бұрын
With that 22xe cam what was your Dyno numbers?? An what stage did you also upgrade to ?? What exhaust systems do you also have??
@vmotobiker Жыл бұрын
You're right on with your take on the looks. Your bike looks great, the exhaust sounds perfect.
@devind429872 жыл бұрын
I got stung in the stomach riding one time. Thought it was a cigarette butt at first. Shit hurt something wicked.
@thejohnnerparty2 жыл бұрын
I like the look - the exhaust, the seat and of course the tune (cam).
@joalvarez62522 жыл бұрын
💯 Man! Concise video! Keep the wheels turning and the beavers grinning 😀
@jasongallagher76462 жыл бұрын
Wow, that cam/exhaust make that M8 sound sweet. Sounds like a twin cam!
@skeggst29572 жыл бұрын
haha not quite. I cranked my wide glide earlier and me and my dad agreed the M8 will never sound like twin cam
@WRXXXual2 жыл бұрын
Bro, your bike sounds SWEET! Happy riding👍🤘
@gorillahd92472 жыл бұрын
Big improvement in looks and sound. If she hauls as good as she sounds you have a fast bike!
@martinXY2 жыл бұрын
4:15 The sound that makes me smile
@NeatFreq2 жыл бұрын
So glad you got the extensions sorted man
@franklinbittner46832 жыл бұрын
Wowww everything is amazing on your choices,
@robertyoung5678 Жыл бұрын
Awesome video it really thank you for sharing the content in the detail👍
@Tyfyss2 жыл бұрын
Looking to get this same cam for my RKS! Love the numbers and the sound!
@joeplem53292 жыл бұрын
Very nice ride!!! This is the only new Harley I'd consider trading up my 2011 dyna street bob which has the SE 110 tire shredder kit making about 106hp/122tq. Think I'll wait for the hype to die down a bit more though!!!!
@tommiller87142 жыл бұрын
Nice results for a solid combo of selected parts and install/tuning by the shop. Bike looks good, sounds great (nice chop at idle) with the Woods 22XE Cam and S&S 2-1 Exhaust. Well done brother! Tom M., Hawthorne Ca. My two Harleys and mods/upgrades (so far): '21RGS/Stage-2 114 (S&S 465c torque cam / S&S 2-1 sidewinder exhaust / Fuel Moto 3956 Air Cleaner / Trask M8 Checkvent / Fan (added to oil cooler) / Dynojet PV3B Tuner w/MAP by Fuel Moto) / RWD remote reservoir shocks / Saddlemen Custom-built Road Sofa seat and HD detachable sissy bar w/passenger back pad / Rockford-Fosgate HD Stage-2 Boom Audio (4-speaker/400w). '22FXLRS/Stage-1 117, S&S Slip-on's / Trask M8 Checkvent / RWD Rear Monoshock w/remote reservoir / HD Quarter Fairing w/Denton 12" Windshield / Black levers / Saddlemen SDC Seat w/drivers mini backrest / HD LED's / HD Passenger Pegs, Detachable sissy bar w/passenger back pad.
@skeggst29572 жыл бұрын
Nice setups. I'm back and forth on suspension right now because I'm not sure I'd get the most out of it just yet. Gonna learn what the limits are of the stock suspension first.
@DTMFJeff2 жыл бұрын
@Tom Miller, please tell me more about your oil cooler fan install, I found the connector for it down by the crank sensor. Pictures or P/N would be great.
@tommiller87142 жыл бұрын
@@DTMFJeff HD P/N 26800195 and ThunderMax P/N EA7000, are for HD Touring Models. Either one is a simple add-on to the existing HD Oil Cooler (do not have to disconnect oil lines). I'd recommend to have the HD Dealership install it (30 minutes or less, actually more like 15 minutes) and then flash (typically a $50 charge) the bike's computer (ECU) to let the ECU know that the bike now has an Automatic Temperature Controlled Fan on the Oil Cooler. Now you need to ventilate the engine crankcase: I recommend the Trask M8 Checkvent (or you could use a Billet Vented Oil Dip Stick, such as the one from Fueling). Your engine will run better, last longer, etc. It's 2 upgrades well worth it. Ride safe.
@DTMFJeff2 жыл бұрын
@@tommiller8714 Yeah that's the same cooler I installed on my CVO SG but now I have the FXLRST I don't think there is enough room behind the cooler to install one.
@tommiller87142 жыл бұрын
@@DTMFJeff Not aware of a Fan for Oil Cooler for a Softail/Dyna chassis. Love Jugs does have a mini fan setup that would mount on the left side (clutch side) of engine and blow air across the exhaust valve side of each Head. They are available in Black (would be somewhat discreet appearing on a Low Rider ST or S, or any softail). Might be worth taking a look at this.
@glennhand25932 жыл бұрын
For the money I think you’re way ahead of the game man if you would’ve taken to Harley Davidson been double the money for that work you had done 🤘
@stephenuffindell2 жыл бұрын
Greet video. Sweet ride.
@clubstyleridahd46954 ай бұрын
I have this pipe on my fully built stage 4 sportster 1275. Taking it to the dyno in a few days. But even with the break in tune it rips im hoping for 110hp. Its a great exhaust though. The db reducer makes the engine run so smooth.
@BeardedBavarianBiker.Күн бұрын
Great looking bike man. You can't go wrong with a S&S teardrop intake and exhaust. Pipe sounds great considering the baffle is in. Shits all over the TBR, they are crap.
@cruzdehoyos336 Жыл бұрын
Nice ride man! I’m really digging the setup. I just ordered a white sand Pearl ST and I’m wanting to set it up pretty similarly! Ride safe!
@fvgc454ss2 жыл бұрын
Buddy has same cam in a 124" fuel moto kit sport glide, DnD fat cat pipe. Big K&N filter 132hp/141tq to the wheel. But it hits Hard! Ton of instant power. Stock Tb s&s intake
@simplybeingshipley2 жыл бұрын
Great advice that I will use in my build. Check it out!
@vernlochtefeld16262 жыл бұрын
Surprised your bike sounds exactly like mine even the idle. Your cam is different same exhaust but with no cat. 118/126 is good for the money. Mine is a Sport Glide SE-498 cam same exhaust but with cat. New bike I got the build put in with my bike loan so no out of pocket, got the 20% MoCo discount and retained full warranty. 116/116 Still cost me about $600 more that you spent. Mine has the SE tuner to retain warranty so I normally have the 120 mph limit. However they put in a switch to turn the speedo off for “testing purposes”. After which my phone GPS shows 140 mph.
@nickthinkpainting1978 Жыл бұрын
Where did u order the exhaust from ? Nice bike BTW...
@breedlofam Жыл бұрын
My 107 FXBB with the 22XE is pushing 108/119 average across three dynos. I've found that this cam runs a bit hotter than say a 475 or 468. Not like crazy hotter, but about 5 degrees hotter than my other cams I've had in it. Love the new FXLRST's, but around me the dealers are asking well above MSRP on top of all the other dealership fees they like to throw in and I refuse to play that game. Hoping that later this year that prices go back to normal and I can pick one up.
@PrivateUsername8 ай бұрын
You haven't lived until you get a hornet up the armhole or in the visor while doing 100 down the road :)
@toomey2wheels247 Жыл бұрын
awesome video man love your build
@mikegeorge9912 жыл бұрын
Love the bike
@atrain8822 жыл бұрын
But love the ST brother I wanna get one myself hands-down beautiful bike keep playing with it and add in stages
@Heritagejim53392 жыл бұрын
Great power & sound! I wish I would have put in the Wood’s cam but I was trying to keep my warranty. Also I can relate to the heat. I’m here in central Alabama. New sub😎
@04boostedboxer Жыл бұрын
Dealers can’t void warranties due to mods. It’s illegal
@2kanchoo2 жыл бұрын
Awesome man I'm glad you got the riser cable and everything sorted. Can't wait to see the video on it.Good numbers and hella nice torque curve. A lot of the 2-1 exhausts make a low end torque dip. (like my bassani most likely will haha)
@skeggst29572 жыл бұрын
Video to come! I’ve heard good things about the bassani and I actually ran one on my street Bob and really liked it. Get the king version if you can.
@Ultimanium1 Жыл бұрын
Man I've got to know who makes that seat it looks sick!
@illmanner4152 жыл бұрын
Nice bike brother!!! Doesn’t the stage voids the warranty?
@FranBunnyFFXII Жыл бұрын
Haha, nice. I tested my SE Torque Cam'd Fat Boy 114 "in Mexico" and hit 130 on it.... a few times. Just a few. Nice to see someone else who actually rides out their harley.
@FuckTheSystem19872 жыл бұрын
Was tossing up between the woods and the sns 475 cam, thought i had my mind made up. This video hasnt helped that situation lol.
@mattgoodmangoodmanlawnmowi24542 жыл бұрын
It’s an expensive way to get speed but it is a beautiful bike with a lot of tiger in its tank. And the pipes are some of the best I have heard on an HD. Let’s see it on the strip. I would love to see its acceleration numbers.
@skeggst29572 жыл бұрын
When our track opens up maybe we will get that video.
@mattgoodmangoodmanlawnmowi2454 Жыл бұрын
@@skeggst2957 Fair enough. The proof of performance work is the timing slip.
@45s262Ай бұрын
What's up with your bike? We need some more ST vids..
@c.p.beasley9132 Жыл бұрын
First off. Bike looks Amazing I can truly appreciate the S&S combo. 2nd how tall are you? Trying to get a idea on sizing up for the risers I wanna go with and height comparison. Are the risers 8.5"? If so how does it feel and ride at this point?
@skeggst2957 Жыл бұрын
Hey man. Sorry I haven’t uploaded in a while. Every day I’m off to record it’s either bad weather or something. I swapped the risers for OG Moto 8.5 pullbacks and I have got to say they are absolutely perfect. I’m 6ft and these are tall enough and have enough pullback to be comfortable for long rides but not so tall that they lose their sporty feel. Get them and don’t forget to get the shims if you are using the stick bars. I did haha.
@MegaWeylin2 жыл бұрын
Ripping!!
@jasonkimble89262 жыл бұрын
Good numbers. 475 cam on 117, 115hp 132tq.
@skeggst29572 жыл бұрын
That’s great! Details on exhaust and intake? Do you have your chart posted somewhere? Always cool to see what other people come up with.
@bcelectricco2 жыл бұрын
@@skeggst2957 I have a 2020 fxlrs with a Zippers 472 cam. Bike did 98hp and 106tq. Installed a 64/64 throttle body and manifold then bike did 109hp 118tq. Bike did 153mph top speed. Running P.C. piggy backed with P.V.
@dhelding Жыл бұрын
Did you have to build/buy a bracket for the bags when you added the pipe? Or just the s&s pedal. I ordered the same one.
@drainmonkeys385 Жыл бұрын
Sounds great. I just bought the lowrider st on Saturday.. traded my Bob .. gotta do exhaust.. and want cam…. But don’t want to lose warranty just yet.. so I gotta work something out
@MrBladesman18892 жыл бұрын
Hi dude, would you be able to put a full list of parts used? I have an ST on order and fancy going down a similar route engine wise. Thanks brother 🙏🏻
@aaron1692 жыл бұрын
Those pipes sound great! Did you say how tall you are? I'm 6'1 and I really like the style and look but I would probably need forward controls. Thanks for sharing your journy!
@skeggst29572 жыл бұрын
I’m 6 feet even and I’m used to the mids now. I can use the crash bar as a forward rest but I rarely need to.
@parajumper11 Жыл бұрын
How do you like your seat comfortably? Looks and sounds great
@spoom9372 жыл бұрын
I have a 20 fxlrs which has a 114 I went with s&s 475 kit and got 120hp and 120tq. The only reason my tq was so low is because of my pipe which is a short 2 into 1!
@spoom9372 жыл бұрын
My buddy who owns the shop had the same setup I do he got 118hp and 130tq from s&s 475 cam. He's got a 128 build and is pushing big #s lol.
@johnlittle67112 жыл бұрын
What shorty 2 into 1 ?
@johnlittle67112 жыл бұрын
Tbr ?
@spoom9372 жыл бұрын
@@johnlittle6711 na it's a Stealth pipe! Sounds really really good! But performance wise not the best choice and that goes for every shorty 2 n 1!
@johnlittle67112 жыл бұрын
Joshua Woods I am running the Bassani 2 into1 with the 22xE with fuel moto tune on my 2020 fxlrs . Feels strong through out . Getting target tune, I will have it in the dyno to see we’re it’s at. Love this set up. The 114 is at 10.5 compression and the 117 is at 10. Don’t know if that makes a difference but after market cams love compression. I get that there is no replacement for displacement!
@cflowers2541 Жыл бұрын
Bike looks sick. Your content is great. Was the exhaust a straight forward install with all oem foot controls, or did you have to use a relocation kit? Also will it clear passenger pegs?
@palmettolowlife19962 жыл бұрын
Good informative video. What brand are your black tube and Tappet covers ?
@skeggst29572 жыл бұрын
Tubes are S&S, tappet covers are drag specialties
@Big-Daddy967 ай бұрын
Did you change out your throttle body as well? I dont recall hearing you mention it
@director2bob2 ай бұрын
I turn 62 next month and buying a new Harley for my 62 birthday. I have not ridden in 15 years and my last bike was a 825 Street Glide with a sluggish 88 cubic inch engine. When I saw this new Low Rider ST I new immediately this is the bike I am getting. 100lbs lighter than a Street Glide with a 117 engine seems like a dream ride. The only modification I will initially make is change the pipes and either do a stage 1 or 2. You seem very knowledgeable so need to ask you a question. I do NOT like to ride 100 MPH but I LOVE going from 0 to 60 as quickly as possible. So not sure what type of upgrade I need to do. Not sure if a stage 1 will suffice or I should go with a stage 2. Also how do you decide what cam to go with when doing these upgrades?. I do not want want to throw money away if a stage one will give me that quick 0 to 60 torque. But because this will be my last bike I have no hesitation doing whatever will give me the most smiles per hour. I also need to mention I do not want to void my warranty so whatever cam I use or if I do a stage 1 or 2, going to keep this in warranty. Changing subject if you want a good laugh. You mentioned about a wasp going in your helmet. Many years ago I was riding upstate on highway in NY with my $10 plastic brain bucket and a bee or some scary bug went up my nose while riding and I was NOT able to immediately pull over. Having a nasty bug crawling inside your nose when riding had to be my very worst experience of my riding life. I am lucky I kept the bike on two wheels because I was freaking out. Thought you might appreciate that story. And thanks for great video. You have a new subscriber. Safe travels my friend🙏
@brianbutler3072 ай бұрын
Responding from my other account. Sounds like you have a good plan! You may not need a cam at all, I'd start with an exhaust and tune performed at your harley dealership before adding a cam. You may decide that's all you need. These bikes definitely dont sound good from the factory so that's where I would start. Get it broke in and after 500 miles let her rip and see how you like it. I'd also invest in some risers. If you want to keep your warranty you should have harley do the engine work if you decide to have it done. I wasn't worried too much about the warranty but if that's important to you you'll have to get HD to do the work. My dad is 62 as well and he rides this bike a lot and really enjoys it. Cheers!
@director2bob2 ай бұрын
Thanks for quick reply my friend. An hearing your 62 year old dad is riding the same bike just confirms I am making the right choice. The only bummer was I love listening to music but never liked wearing earbuds when riding as I like to hear what's going on around me. That all changed today when I read about a slip on fairing that Harley makes specifically for the Low Rider ST that is 250 watts of power and has two speakers and the amplifier built onto the fairing for something liker $1000. I am sure you know about this but for longer cruises music is a blessing at least for me. I wish you and your cool ass dad safe travels and many miles of new enjoyable experiences!!! 👍 Plus the money I will save by just going with new pipes and just a tuneup as you suggested of the stage 2 with new cam will covers a good portion of the cost for this speaker system. Great advice. Thanks again kzbin.info/www/bejne/r2GoZmONq91nfdE
@TheYoungnut27 Жыл бұрын
Thunderheader 🤟🏼🤟🏼
@SecNotSureSir2 жыл бұрын
Yes
@vntgmx2 жыл бұрын
Nice setup. Cam makes a nice lope but M8 just will never sound as nice as a Twin Cam. Anyway the M8 definitely does haul and have gobs of torque on the plus side Enjoy the ride!
@skeggst29572 жыл бұрын
I agree! My mostly stock 103 twin cam sounds great.
@rickhardrollmitchell6022 жыл бұрын
I am actually getting ready to move to haleyville,Alabama. I would look forward to riding with you, if you wouldn't mind. So I can get a little bit more feedback on what I can do
@rickhardrollmitchell6022 жыл бұрын
I actually had to sell my dyna street bob to jelp pay for my daughter's son to come and stay with us until his mom got better. So I could make some bills go away. So,I will probably be getting the lowrider St as an upgrade for sure.But I want to go the touring route as well
@skeggst29572 жыл бұрын
Yea man Halleyville isn’t far from me, about 45 min. Check out Natchez trace Harley when you get moved.
@chrisvantassel8867 Жыл бұрын
I did a Stage 2 on mine through Moonshine Harley. Definitely made it faster but for the amount of money I spent I would have expected more. My eyes are set on that new Buell Super Cruiser.
@freddie90014 Жыл бұрын
I’m considering a stage 2 from moonshine Harley. How much did it cost?
@chrisvantassel8867 Жыл бұрын
@@freddie90014 it’s not cheap, just over $10k
@ChristianKustomz2 жыл бұрын
New sub here. Thank you for the details. Good video
@skeggst29572 жыл бұрын
Thanks!
@mattgoodmangoodmanlawnmowi24542 жыл бұрын
I’m always amazed at the amounts of $$$ HD hooners go to get 118 hp with a fingers crossed hope it could be 130 in 6 th gear only. Meanwhile I have a Daytona 02 955i with 148 hp stock. 12K miles, one owner. Matt Capri exhaust tune & dynoed at 170 hp with a broad power band. For $5100! Six weeks of searching after three months of generation by generation deciding that 02 Daytona was one of the best examples of a bike that gives you a lot of bang for a few bucks. by the way the Daytona weighs just over 400. I wonder what would happen at the strip. It’s a beautiful bike beautifully upgraded. But the fact that it weighs upwards of 800 lbs won’t help you off the line. I could afford a bike like that. And I don’t mind getting outrun by a Busa or a Gixxer, but for $5100 I got a beautiful bike that’s faster than all but maybe a HD with a blower. No disrespect but facts are facts and quarter mile times are the best test.
@skeggst29572 жыл бұрын
Interesting perspective. Here’s my take. If I wanted a fast bike I’d buy a Kawasaki H2 for the same money I have in this bike. But I wanted a Harley LRST. Not for the speed, for the entire package, which includes the sound, looks, feel, and image that I like about Harleys (I have 3 nice Harleys). The money I spend to make it faster isn’t so I can pretend like it’s a fast bike, it’s to make the bike I like more enjoyable. I have significant funds to do so, so I’m not bothered by the price because that’s what I like to spend money on. On the other hand, I wouldn’t be caught dead on your bike. It’s just not my thing. So I don’t care if I could get a 955i for $20, I still wouldn’t ride it. Side note: the 955i was 128hp stock, not 148, and I highly doubt you gained 42hp with an exhaust and tune. No need to stretch the numbers, it’s still faster than my bike.
@mattgoodmangoodmanlawnmowi24542 жыл бұрын
@@skeggst2957 I like both types of bikes but I like speed plus I am getting a bit old to flog an 800 lb bike. I think the difference in hp might have been at the crank vs cthe wheel. But one of the bike mags reported 11 flat quarters. What would it take to get that in a HD. H2? more than I need and don’t like them that much. And I don’t need to be fastest, I just want some decent accelleration
@mattgoodmangoodmanlawnmowi24542 жыл бұрын
@@skeggst2957 Yet another side note. The 955ii triple was 128 or so hp in Speed Triple form. But the Daytona 955i had a different tune that yielded something like 148 hp. But you have to dig to find that.
@RideOutside2 жыл бұрын
This is like stopping a random dude pumping gas in a Denali and scolding him for not buying a $5k fox body like you 😂
@mattgoodmangoodmanlawnmowi24542 жыл бұрын
@@RideOutside Except a Denali can do a lot of things fox bodies can’t. But during a fog storm emergency about 30 years ago LEO said if you weren’t driving recklessly you could drive as fast as you wanted to get home before the fog rolled in. My 88 fox body V8 Thunderbird outran a Porsche on top end. And I suppose you can haul more of your stuff on a bagger but these days I tend to ride close to home & sleep in the same bed at night so I don’t need to haul a bunch of gear with me. The H2 isn’t a bad bike either but I like tho “show” & the “go” of the Daytona. If I rode to Sturgis, Daytona and a half dozen other out of state rallies I can see it. If I were younger I would have one of each plus a scrambler. But today I would rather leave another $50-100k to my son & still be quick. But if I could really qualify as a RUB, I’d still buy the Daytona but probably get a beefed up Lowrider for variety. I’m not knocking Harleys or the people who ride them. But these days I want fast, light and not a money pit. If you have a $100K HD that puts a smile on your face and doesn’t interfere with other areas of your life more power to you. And I will definitely admire your ride. But I will still twist the wick at a traffic light if we get lined up right. I’ve always been a bang for your buck, go-faster kind of a guy. I like show AND go, but for me it’s go first. To each his own but if money was no object I would want one bike that could at least break into the 11s in the quarter. But part of the fun of biking is seeing different people with different ideas of what they want in their ride.
@shanehazelton87542 жыл бұрын
Having a hard time deciding on exhaust and cam but your setup is sweeet! Where did you order that exhaust I can't find it with the race only on it
@skeggst29572 жыл бұрын
Got mine on ebay
@shanehazelton87542 жыл бұрын
@@skeggst2957 thanks man The clips at the end got me excited! Exhaust and cam will unleash the lowrider st
@drainmonkeys385 Жыл бұрын
Hmmmm. I was thinking the 475. I’ll need to consider this.
@rogernonya21835 күн бұрын
Whatever happen to this channel? Still got the st?
@kaiserman6667 Жыл бұрын
Hey what brand of seat are you running brother? Great vid.
@michaelthompson70012 жыл бұрын
hello, I have 2021 Sport Glide and I've been researching every cam out there, I was going to with the Woods WM8-22XE, but, went with the Star Racing 30 / 30 cam for a 107, did you look into the 30 / 30? I'm assuming that your costs did not include your PV tuner? as the install kit from Fuel Moto is $719, cam, lifters, bearing, pushrods and gaskets, I'm also using the S+S cam plate and oil pump, did you replace the stock plate and pump? dyno sheet looks awesome, it's a great cam, thanks
@skeggst29572 жыл бұрын
My cost of $2300 did include the time. I did not upgrade the came plate and oil pump though as it’s not needed with the 2020 and up bikes. The pump was revised and is sufficient. They did upgrade me to a timken bearing though. I hadn’t looked at the 3030 cam, I’d be interested to see what kind of numbers it puts down.
@itemps2 жыл бұрын
Can't go wrong with George's cams.. sound better than the rest and power is great
@robertyoung5678 Жыл бұрын
So what are the Dyno numbers on yr 2021 sport glide with the star racing 30/30 cam ??
@michaelthompson7001 Жыл бұрын
@@robertyoung5678 105 HP and 125 ft lbs of torque, a little disappointed in the HP number, as I also replaced the plastic intake manifold with an S+S 55mm, I'm alreay thinking about a 124 Fuel Moto kit, but, the 30 / 30 is a great cam and sounds really good, has a nice "lope" to it, I did have the dreaded "dip" around 2500 rpm though, I have a Rinehart slip-on and stock headers, my guy says that the softails just have the dip, where the touring bikes have a longer pipe, any thoughts on having the complete exhaust set up, would I be better off or do you think I'm OK running the stock headers? thanks
@robertyoung5678 Жыл бұрын
@@michaelthompson7001 I would go with the full performance 2 in the one exhaust and It could probably possibly put your torque maybe around 130 torque?? I went with the two into one S&S super street race exhaust!! I was at like 104 horsepower and 128 torque and when I put on the S&S two and the one street race exhaust and that put me out to around 133pounds of torque👍 and sometimes it just depends on your setup but you sound like you have a good setup on your bike so it would be worth to consider🤔 there's a lot of two into one pipe I'll try to choose from but the three I had to choose from was it D&D Fat Cat exhaust and the Vance & Hines Pro pipe and an S&S super street race exhaust!!
@508knucklehead Жыл бұрын
I just dumped 3k into my twin cam 103 .. and I’m n where near what your making.. might get a lowrider lol
@AnthonySkubic2 жыл бұрын
Hey Skegg, is the catalytic in the muffler or the headpipe on the LRST?
@skeggst29572 жыл бұрын
It’s in the muffler.
@AnthonySkubic2 жыл бұрын
@@skeggst2957 Thank you sir. I have received multiple different answers, even from HD!
@donaldswanson51706 ай бұрын
Sick!
@dotlaj2 жыл бұрын
Aren't the bags of the sport glide equal size it has 2in1 exhaust just hate the unequal bags.
@terrymartinez62822 жыл бұрын
Why in the world they didn’t show air to fuel mixture????
@jbluet2 жыл бұрын
All that bike stuff is nice and all. But what I can understand is. He said 100 degree weather, but still a leather vest. I could never understand the harley and leather fringes and bandanas deal. 🤷♂️🤦♂️
@skeggst29572 жыл бұрын
Aesthetics Uber alles
@jbluet2 жыл бұрын
@@skeggst2957 not sure what your pkst means.
@denisprokofev8752 Жыл бұрын
What kind of seat is that? Looks very nice!💪🏻
@user-ov3lr6tk7z Жыл бұрын
라이딩, 모터싸이클라이프~ 🌞 손을들면👋 , 더~반갑습니다. 더~안전합니다. 더~정직합니다. 늘 안라무복하세요.👏👏
@justocruz7479 Жыл бұрын
How were you able to get such high top speed when HD has a limiter on the bike. I couldn't seem to break 112mph and that's with a dynojet tune on the bike. It says the limiter is disabled but doesn't seem disabled to me since HD limits the bike to 112 and that's as far as my bike will get.
@dnewman3402 Жыл бұрын
On a scale of 1-10 for loudness what would you rate the D&D two-into-one Billet Cat exhaust compared to the S&S Super Street two-into-one exhaust?
@boioselstat4158 Жыл бұрын
Hi, did you need the washers for the Woods 22 xe during installation ?
@chrisvantassel8867 Жыл бұрын
I dig that seat, who made it?
@brettbonz121 Жыл бұрын
Is this a bike video or a gym video…?
@derekprobizanski Жыл бұрын
What seat is that? Looks amazing!
@MegaWeylin2 жыл бұрын
So did the exhaust come with a bracket to support the bag or did the stock bracket work and not have to be removed?
@skeggst29572 жыл бұрын
S&S included the bracket. I can’t guarantee all of them do since I haven’t seen the pipe listed for the 2022 FXLRST yet, but I ordered the one for a sport glide.
@exoprasta2 ай бұрын
What’s your seat? The brown leather looks nice
@brianbutler3072 ай бұрын
Whiplash speedco slipstream
@exoprastaАй бұрын
@@brianbutler307 and what brand is the pushrod covers?
@th33b332 жыл бұрын
I deflectored mine lol got the screamin eagle tuner and S&S slash cut slipons, bung king crash bar. I’ll wait for my warranty to do a cam. Interesting it has a stage 2 cam from factory. There is no stage 2 from HD for this bike.
@skeggst29572 жыл бұрын
A true stage 2 on this bike would be exhaust and cam. The factory 117 cam isn’t really considered a performance cam, though it may be a bit more aggressive than the 114 cam. Easiest way to tell is the smooth idle.
@th33b332 жыл бұрын
@@skeggst2957 I agree, but according to HD it’s a “performance cam” and there is no official stage 2 upgrade or stage 2 tune for our bikes. Just stage 1,3,4.
@skeggst29572 жыл бұрын
@@th33b33 This bike may be better than the 114 but saying “it has a stage 2 from the factory” isn’t wholly accurate.
@marcussae2859 Жыл бұрын
Hi do i need tuner as well if i mod this S&S exhaust? (Without stage 2 kit)
@hybridEP3 Жыл бұрын
Where’s the street pulls?
@jimunger68302 жыл бұрын
I like that seat. What is it and did it sit you back and down some? Thanks
@skeggst29572 жыл бұрын
Whiplash speed co. Slip stream. It does in fact move you down and back.
@chip98328 ай бұрын
💯
@gintowncycles7232 жыл бұрын
Hey man what part of AL are you in?
@skeggst29572 жыл бұрын
Around Huntsville
@gintowncycles7232 жыл бұрын
Ok cool, I’m in Bham area.
@skeggst29572 жыл бұрын
Hit me Up on Facebook. Brian Butler. My profile pic is me with Robocop as a face.
@madmike3932 жыл бұрын
Hey brotha nice bike. I’m having the same problem you were having on my low rider st. Can you please tell me what I need to do to fix this thing ! Lmao
@skeggst29572 жыл бұрын
If you are using a kit from cablekits you will need to contact Shane and have him send a new TGS sensor wire. He knows about the problem and should be able to get it sorted.
@FreedomRider19822 жыл бұрын
💯💯👍
@hk8089 Жыл бұрын
Can I get a link on that seat?
@bgdompor2 жыл бұрын
What part no. S&S mid mount brake pedal kit? I am having issues fitting the bell crank into the sleeve.
@skeggst29572 жыл бұрын
I got mine on eBay by searching for S&S brake pedal kit
@bgdompor2 жыл бұрын
@@skeggst2957 I ended up honing both bell crank and brake pedal bushings. Not good...
@jdrider4149 Жыл бұрын
Hey bro do u kno where I can find the vent delete plugs for the front fairing ?
@fxlrsaz63632 жыл бұрын
How you like the seat and have you put a lot of miles ?
@skeggst29572 жыл бұрын
I love it so far. 800 miles in the seat and it hasn’t bothered me.