We went from 35’s to 37’s. Added preload to the front coilovers and swapped out the rear springs for additional rear height.
Пікірлер: 32
@carrow22509 ай бұрын
Looks really good, Very nice setup! I have a 23 SR5 and went with 1.75” rough country spacers in the front with Cornfed 1” spacers in the rear with SCS F5 wheels w/ 12mm offset and 275 70 R18 tires.
@Proteanlife2 жыл бұрын
Damn clean. I work in my rig and 95 percent of the time there loads in the back. I like those green ones
@bratley798 ай бұрын
I love the stance. How would you say that the ride quality is after having more time in your truck? Anything that you would do differently? Thank you!!!
@stevemorris6270 Жыл бұрын
How much lift did the ome 2866 springs give you in the rear over stock? I am looking for the 2 inch lift spring for my 2023 TRD pro.
@fullmag_tundra2 жыл бұрын
Such a nice set up here. I need this on mine 🔥
@steverpmoffroadgarage85842 жыл бұрын
Thanks! Let us know if you need any help questions etc..
@fullmag_tundra2 жыл бұрын
@@steverpmoffroadgarage8584 what rear springs would you recommend for about 1" of lift in the rear? 2" might be too much if im lifting the front 3" I want a nice and level stance
@fullmag_tundra2 жыл бұрын
@@steverpmoffroadgarage8584 what’s a good contact for your shop? I wanna get those springs you used going with the same tire setup
@AXHEJAZ2 жыл бұрын
Looks fantastic! I may do this on my truck too! 🤙
@steverpmoffroadgarage85842 жыл бұрын
Totally recommended!!
@SCgtw112 жыл бұрын
Great job - awesome! Did you have to trim for the front wheels?
@steverpmoffroadgarage8584 Жыл бұрын
Yes I did, trimmed the felt liners
@auroragarcia53222 жыл бұрын
Love your Tundra! Do you still have the ome 2866 springs on the rear? How many inches does it lift?
@steverpmoffroadgarage8584 Жыл бұрын
They lifted about 2”
@stratolestele76112 жыл бұрын
I've got a newer previous gen. I've just leveled mine + 285x70x18 on Method wheels. Really wish I could get more aggressive, but I have to be able to get her in the garage and as it is, I only have about 1 1/2" to spare. Need to mod the garage door!
@GreenSweeper2 жыл бұрын
Rear looks lower to me visually. Not sure I am going to go with 37's, seems to be less issues and work and still looks great with 35's.
@steverpmoffroadgarage85842 жыл бұрын
I think you got a good point. Kinda depends on the angle and how flat the ground is but in person fairly level most of time..lol
@kevinthefawker2 жыл бұрын
The “stance” looks great! Do the those Radflo shocks accommodate the higher lift? Do you need longer end links with the taller lift? Are you getting the total chaos rear arms?
@steverpmoffroadgarage85842 жыл бұрын
The shocks handle the extra lift well. Gonna go to taller front spring and higher spring rate to lessen the spring preload. Yes working on extended sway links. Planning to build our own rear links. 😁
@romanracela2 жыл бұрын
Would you use the same rear OME springs if you have a 3" front lift and have about 300 lbs worth of racks, RTT, and gear in the truck bed? Or would you suggest using something else? Maybe a Dobinson's 80-series Landcruiser 2" rear springs lift? Thanks for the any info or insight...
@steverpmoffroadgarage85842 жыл бұрын
I would recommend using a non progressive rate spring for your application.
@romanracela2 жыл бұрын
@@steverpmoffroadgarage8584 Do you have one specific in mind?
@peytondriggers55602 жыл бұрын
@@steverpmoffroadgarage8584 I would like to know as well
@MrWalidjomaa2004 Жыл бұрын
what is the brand and item number for the green one?
@anthonyle8516 Жыл бұрын
I have a 2022 tundra trd pro with 2 1/2 in front and 1 inch in the rear westcott lift I currently have 37s on right now my rear end is a little lower in the rear what what do you guys suggest for the rear spring ? I don’t want to get new shocks and keep my fox shocks I just want it to be more level with no sag when I load weight thanks guys
@daviddouglass2082 жыл бұрын
The green springs, did they not fit or just didn’t like the rake?
@steverpmoffroadgarage85842 жыл бұрын
They provided too much lift, there was about a 2” rake
@brettmiller21605 ай бұрын
Wondering what I would need to fit a 38X13.50R22LT Tires?
@steverpmoffroadgarage85844 ай бұрын
Solid 3” lift and a lot of trimming. Wheel offset right around +20
@hungv54512 жыл бұрын
Got a part number for the OME progressives? Or link?
@steverpmoffroadgarage85842 жыл бұрын
OME2720 - we are able to get you these springs if you can’t find them.
@hungv54512 жыл бұрын
@@steverpmoffroadgarage8584 I believe you said those were the 0" lift I was asking about the 2" ones? Are they 2863 or 2864?