Black Emblem Kit: www.collegehil... Gloss Black "SPORT" Emblem: www.collegehil... Black "Touring" Emblem: www.collegehil...
Пікірлер: 126
@TuroVJ Жыл бұрын
Buddy barely got his car and he’s already modifying it!!! I respect that! 🤝
@IvanRossS Жыл бұрын
Yep that how you do it lol. I modified all my cars and updated audio system, brakes etc. on my old RAV4 i had.
@seanbaril79017 ай бұрын
@@IvanRossS haven't even picked up my new CRV yet, and already ordering stuff for it 🍻👍
@partlycloudy531 Жыл бұрын
I recommend using painters tape before you remove the original emblems to line off the edges to help with putting the new ones on perfectly level in the exact same spot.
@nbraa Жыл бұрын
that's what the 2 pegs are for
@partlycloudy531 Жыл бұрын
@@nbraa only the H has the pegs
@brucegilmore317011 ай бұрын
Very well explained --- THANKS. I almost didn't try this because of the challenges you had getting the rubber trim popped back out after putting the 6 inch painted trim piece (that the "H" symbol is connected to) back on. You used your plastic trim "pop off too"l to pry the rubber trim back out -- but you had what looked like a pretty tough challenge getting it back out of the seam. Instead of using your approach, I put a strip of painters tap -- glue side facing up -- over the rubber trim. Then put another strip of painters tape, covering 1/2 the width of the previous strip of tape (just to make the painters tape wider than I strip would provide), and then to pull the tape away from the work area, I put some small pieces of tape running straight up, onto the back window, to pull my strips of tape up and away. Once I got the 6" plastic trim piece snapped back onto the car, I just pulled the painters tape off the rubber trim, and it fell right back into place without being squeezed into the gap that you were struggling to get the rubber trim out of. Everything else worked great, just like you showed. Thanks again.
@IvanRossS11 ай бұрын
That rubber seal was the worst part about whole job
@firefeature454 ай бұрын
Good idea!
@dejaboom Жыл бұрын
After removing the emblems with floss you know it's much easier to just heat the remaining foam lightly with the heat gun and it would come off a lot easier vs. trying to manually roll it off with your fingers.
@HishamElSheshtawy Жыл бұрын
What a great, helpful, to-the-point, quality video. Thank you! This is exactly what I’ve been looking for.
@andrewb95472 ай бұрын
Looks great!!! Thanks for sharing the how too.
@dabossatx5 Жыл бұрын
Great video and very clear instructions. Install went flawless and had no issues whatsoever thanks to you!
@IvanRossS Жыл бұрын
Great to help, now you have quality made logos that will last you for years and you never have to repaint
@stephenkellervideos Жыл бұрын
Very well explained and looks great! I painted the emblem black on my 2016 crv without removing the trim just slowly pulling it out, luckily the washers fell out where the license plate lights are but this looks much more professional.
@superrcm339 ай бұрын
Great video, Thanks! Just ordered mine. Thinking about ripping and gluing the new one 🤔
@IvanRossS9 ай бұрын
I heard people do that :)
@olivierm21088 ай бұрын
Where did you buy it from brother?
@hectorelbomba Жыл бұрын
Wow thanks. It’s actually not as hard as you would think. The process is a little tedious but it’s doable
@CalvinHikes6 ай бұрын
Wow quite a bit of a pain! Good job.
@IvanRossS6 ай бұрын
It was worth it :) I have not seen any CRV with blacked out emblems yet
@mbarton3611 ай бұрын
Just plasti-dipped mine after seeing the pdf instructions on Honda site. Sport model has blacked out “sport badge” it should have the others blacked out from the factory
@IvanRossS11 ай бұрын
Yeah I know. That's alot of work
@makb53544 ай бұрын
My goodness, what a pain for just swap little plastic letter. My Honda Passport is just pull the emblem of with plastic lever, clean the spot then push new one in.
@IvanRossS2 ай бұрын
I definitely agree with a pain in the butt but there is a way to get around it. By just simply pulling out and breaking H logo.. and replacing it with a new one But you have a chance to ruin some things. Put scratches on pain. And I believe 3M double tape not really going to hold it properly being so thin on the back of the new logo
@slothypunk Жыл бұрын
I just plastidip it black, works beautifully! Just took less than half an hour when and make sure your car is clean, that is it!
@IvanRossS Жыл бұрын
Yes. But it's not going to less lol. I made it permanent. It will less for years. I was looking just to get dipped too but it's only less max 2 years or so. Paint will fade too. Car washes will pill it of slowly.
@slothypunk Жыл бұрын
@@IvanRossS True, it only last maybe 3-4 years. If you hand wash your car it may last 5-6 years. How much you buy the blackened emblem btw?
@IvanRossS Жыл бұрын
@@slothypunk all links in the discretion. And currently prices. I bought a kit
@slothypunk Жыл бұрын
@@IvanRossS Thank you, I don't realize it in the description below
@moealmak96668 ай бұрын
Looks so much better.
@billyrock83055 ай бұрын
Topgun modification video on the Topgun SUV. ❤️ 🇺🇦 🇨🇦
@HikaruIchijoe8 ай бұрын
Great video, but one important thing that you should do is make a template of the emblem prior to removal so you know exactly where to put it back instead of just eyeballing it like you did. Adjust horizontal position of the emblems as well with leveler tool while you were making a template coz sometime they are crooked straight from the factory.
@IvanRossS8 ай бұрын
Couldn't because area was buffet and polished
@HikaruIchijoe8 ай бұрын
@@IvanRossS Put masking tape around the emblem strategically from the taillights vertically and horizontally so you know exactly where the C starts or where the V Stops. Remove the masking tape before you do the removal or emblems and clean up, then lay the masking tape back on the trunk again so you now know exactly where to put the emblem back. Align the emblem horizontally by using a leveler and make adjustments if required. Emblems always appear crooked when it’s not aligned horizontally.
@TheYogimind10 ай бұрын
Great job. I have to say though that it is ridiculous Honda makes it that hard to simply change the emblem.
@IvanRossS10 ай бұрын
Yes I was surprised too.. but just wanted to do it properly by the book and shoot a video about it
@TheYogimind10 ай бұрын
@@IvanRossS and that…you did.
@CalvinHikes6 ай бұрын
What's crazy to me is there's a world in which people live that want Chrome emblems. I don't understand that at all.
@bigallis111 ай бұрын
Excellent how to video. Thank you for doing it. One question, Is that blue nail polish you used to fill the letters in?
@IvanRossS11 ай бұрын
Yes it was nail polish lol. So far it's holding up.
@bigallis111 ай бұрын
Thank you for the quick reply Ivan. That's what I'm going to use also. Pretty cheap to buy to. Less than $2.00 here in USA.@@IvanRossS
@IvanRossS11 ай бұрын
@@bigallis1 I'm in US too :)
@scottchildress8981Ай бұрын
Are the new emblems gloss black and the SPORT satin? Do they match?
@yuzibo57174 ай бұрын
Amazing video! Would you like to test our new product glossy black front garnish overlays?
@Bathgate155 Жыл бұрын
Nice job! But "Hybrid" emblem was placed slightly slanted downward on the right side.
@IvanRossS Жыл бұрын
No it's not it's just look like this the video
@jordanwagner893 ай бұрын
Dude im pretty sure you didnt have to take off the whole inside of your car and just used floss around the emblem, pop it off and put black one in its place. Ive never see someone pop off the whole inside of there car
@IvanRossS3 ай бұрын
You don't have to. You can Ridgid pretty much everything. And do a half ass job I show it how it needs to be done by the book... you can find these manuals all over Honda website... and this is proper way !
@IvanRossS3 ай бұрын
Also you probably have not noticed or you didn't finish watching the whole video but Honda emblem holds by two metal washers from the inside and those are really hard to remove.... to proper secure it have to be be the same way installing emblem and securing with two little washers from the inside.... emblem is really thin and just 3M tape is not going to hold it after a couple of pressure washers it will fall off
@jordanwagner893 ай бұрын
@@IvanRossSvery true, im just gona have the dealership do it bc i dont feel confident in taking the door apart. I would probably break the pegs off trying to take the emblem off anyway. Appreciate the video
@Curlo2 Жыл бұрын
What is the stuff you used to take out the minor scratches you said?? After you used the winded?
@mardigras62211 ай бұрын
Excellent video! Thank you! 🇺🇦 🇺🇦
@randomstuff53078 Жыл бұрын
OH MAN...i cant do that to my new car. hahaha... i wish it was easier
@IvanRossS Жыл бұрын
It's yours you can do whatever you want with it
@user-ci8mi4fn7x2 ай бұрын
Ну красавчик 😍 за символику 🇺🇦 отдельный респект 👍
@susanmccallcarrasco1348 Жыл бұрын
RearGate Insulation: pls post video! TY
@endlessthunder61619 ай бұрын
You make it look so easy to do🤣!
@IvanRossS2 ай бұрын
I know that was a ridiculous job but I was just trying to show people by the book how is done properly. Besides painting hybrid logo :)
@endlessthunder61612 ай бұрын
@@IvanRossS i wanna do it but I’m scared of messing up
@skytechm07 Жыл бұрын
What the tool name you use to heat the bubble
@slothypunk Жыл бұрын
Hey Ivan, just wondering if you check your CRV underbody? I know that Toyota has the thing called under body plug (under about in passenger and driver under body) that is part of PDI inspection to plug it in. Reason I asked is because mine didn't get installed and just wondering if you can look up yours and to see if you have the body plug installed? Thank you beforehand!
@Fadic4 Жыл бұрын
That middle one seems like such a pain, i don’t get why they didn’t have it glued on like the other ones.
@IvanRossS Жыл бұрын
I was surprised to find out how much work need to be done when I ordered these emblems. But it was a great opportunity for a video 😀
@ckez4724 Жыл бұрын
I wish someone could do a 2023 pilot emblem install???? PLEASEEEEE
@12Jsilva Жыл бұрын
wanting to replace mine on my 23 trailsport. dunno why the badges are black but the H emblem is chrome
@kramjtbnm2311 Жыл бұрын
How much did you cost for all?
@demetriustatum672 Жыл бұрын
That’s a lot of work the silver emblem is ok me personally I wouldn’t do that
@IvanRossS Жыл бұрын
It is. But I did it properly. By the book. I have heard people yanked it out. By braking it off and just gluing new one back on.
@babyjonny420 Жыл бұрын
Do you think its possible to access the H logo from the trunk handle below it?
@IvanRossS Жыл бұрын
No lol. Of course not. You have to do all this job just to get to it . I know it's insane. But it's can be done as u see on the video
@kramjtbnm2311 Жыл бұрын
More video trik for the crv hybrid
@aramisbisono8231 Жыл бұрын
Give me the name of the blue that you painted the hybrid and the adhesive tape, please!!!
@IvanRossS Жыл бұрын
Double tape was made by 3M. You can buy it at any hardware store And blue paint was simply nail polish... yes I know it's not a great choice lol. Because it's going to be on direct sun but we'll see how long it's going to last. But you can buy any enamel base blue paint. You can find a little small jars of this type of paint at the craft stores. For only few dollars
@toddmeadows12916 ай бұрын
Do you have Honda part# for the H and CR-V black emblems?? How about the front one??
@firefeature454 ай бұрын
@@toddmeadows1291 You probably have these, but maybe it will help someone else. The H and CR-V kit part #: 08F20-3A0-100
@michaelfiss4282Ай бұрын
What about the H for the grill?
@IvanRossSАй бұрын
@@michaelfiss4282 they don't have it because it's your front radar sensor
@TuroVJ Жыл бұрын
I’m curious tho! What’s the reason for the insulation!?!
@IvanRossS Жыл бұрын
What do you mean what is the reason for insulation? You installing insulation to lower outside noise lol.
@MultiFays Жыл бұрын
Just put my black H emblem on my brand new pilot black edition yesterday, looks great , Honda should do that at the factory for black edition , by the way Слава Україні🇺🇦
@IvanRossS Жыл бұрын
On sport touring with all that money they charged.. it should comes with it
@12Jsilva Жыл бұрын
how did you do it? we just got the '23 pilot trailsport. wanting to replace the chrome H mark with a gloss black one. do i need to open the inside of the trunk or i can pry the emblem directly?
@MultiFays Жыл бұрын
@@12Jsilva Hi ,it should come out pretty easy , you just have to cut of 3M tape on the top and bottom by using fishing line
@12Jsilva Жыл бұрын
@@MultiFays gotcha. Will do it tomorrow. Got my emblem today 😁😁😁
@MultiFays Жыл бұрын
Good luck
@namnguyen-xj3xl Жыл бұрын
Can u send me the link for buy the black one , please 😅
@IvanRossS Жыл бұрын
Read description...
@victordiaz628411 ай бұрын
Where u got the crv logo? I can’t find in us
@IvanRossS11 ай бұрын
You never read descriptions to the videos..... you can find a lot of useful information in that section ! all links in the description
@NinjaAlex6r Жыл бұрын
Can you list the black and blue paint that you used?
@IvanRossS Жыл бұрын
Black paint you can literally see in the video. Blue paint was nail polish
@NinjaAlex6r Жыл бұрын
What type of blue was it? It was hard to see the name, also did you use the gorilla glue to stick back the hybrid logo? Thanks for the response
@alanlangendorf4389 Жыл бұрын
Have you blackout the front fake air vents yet
@frankpuma8778 Жыл бұрын
I just ordered those to replace mine. Garnish L Front Bumper 71157-3D4-A01 Garnish R Front Bumper 71152-3D4-A01
@IvanRossS2 ай бұрын
No. actually do not find them being ugly at all.
@sergiipiddubniak1568 Жыл бұрын
Дякую!
@IvanRossS Жыл бұрын
Будь ласка :)
@NinjaAlex6r Жыл бұрын
Do you plan on doing the front emblem?
@IvanRossS Жыл бұрын
You can't lol. Its a radar
@NinjaAlex6r Жыл бұрын
😩😩 you think we can smoke it with light tint vinyl?
@IvanRossS Жыл бұрын
@@NinjaAlex6r I was thinking about it. I'm sure soon it will be sticker available that you can just put over it. It shouldn't mess with a radar. but over all that logo been chrome don't look to bad
@NinjaAlex6r Жыл бұрын
@@IvanRossS I bought dark smoked vinyl and it had no effect on the radar system
@mjnhhhhh652511 ай бұрын
hi is there emblem for the front?
@IvanRossS11 ай бұрын
No, front emblem it's a radar. Very very expensive peace
@Guy-wb3ch Жыл бұрын
Id just rip it off and adhere the new one.
@KosThunder Жыл бұрын
Дякую за відео! Перший канал де багато корисного матеріала безпосередньо від власника Honda CR-V hybrid! Так легко у Вас все виходить), таке враження, що мали досвід в автосфері. Рамка під номерний знак - ТОП! Слава Україні! Слава ЗСУ!
@IvanRossS Жыл бұрын
Дyже дякую вам. Героям Слава 🇺🇦
@davidanderson8469 Жыл бұрын
How about a spare?
@IvanRossS Жыл бұрын
No spare tire in Hybrid models
@californication88uu Жыл бұрын
The blue shade looks cheap, you shouldve pick a better blue gloss shade so it will look better
@IvanRossS Жыл бұрын
It's same color lol on all Hybrid logos
@aramisbisono8231 Жыл бұрын
Can you putting to my crv?
@IvanRossS Жыл бұрын
Yes sure. send me your address, I can go ahead take a vacation buy plane ticket, pay for it and fly to you to install Honda logo
@yurarezhevsky9823 Жыл бұрын
Thank you for supporting Ukraine!❤
@IvanRossS Жыл бұрын
I was born and raised in Ukraine of course I will support Ukraine
@yurarezhevsky9823 Жыл бұрын
@@IvanRossS Тоді це все пояснює) Приємно чути)
@yurarezhevsky9823 Жыл бұрын
@@IvanRossS Я на Copart купив теж Хонду Спорт з невеликим пошкодженням. Зараз пливе, очікую і потроху вивчаю що може бути корисним... Буде перший мій гібрид)
@BuffaloBob-o2w13 күн бұрын
Why the fuck would anyone pay for and install a black auto logo.