Рет қаралды 817
In order to support our Jeep racing craze and R and D we get out of racing we built a purpose built JT Chase Rig with an Auto Leveling Rear Air Ride System in conjunction with AccuAir Suspension designed for overland rigs but tested in a chase rig which is a much tougher environment than an overland JT will ever see. This JT is a 100% purpose built SEMA vehicle for Rigid industries at SEMA, then off to King of the Hammers to chase and support our new JL 4600 2 Door as well as the JT for long course desert! Each and every part in this vehicle was chosen for reliability and durability! It started with a customized Rock Krawler Suspension JT Adventure X Pro using high ability service free adventure series joints, RRD racing 2.625 Remote Reservoir Shocks, Rock Krawler Pro X Steering with Hyde-A-Lizer kit. The carpet floor was replaced with Armorlite rubberized flooring for ease of cleaning! An @ARE Truck Cap was color matched to the Mojave JT to keep all of our tools and gear out of the elements with ease of access with an ARE roof rack to house all the RIGID Industries - LED Lighting lights and any over flow gear we may need to carry! A @Spod Bantam was added to control all the lights and periferals mounting to CMM Offroad mounts. The CMM Offroad Mounts will also hold some Rugged Radios gear to keep communications with the chase and race vehicles in check! A Savvy Off Road front bumper houses the Warn winch and FACTOR 55 Ultrahook which are all critical items for recovery if ever needed. The Nitto Tire USA 38” Ridge Grapplers are the perfect tires for chase and support rigs that need to be tough, durable, run down the road and kick butt in the dirt. The tires are mounted on Dirty Life Race Wheels and keep the beads safe and secure when air’d down. We will be adding tons and tons of gear to this rig as time goes own. Right now there are a couple MotoBilt spare tire carriers mounted in the bed to hold the spare 35” Nitto Trail Grapplers for the race rigs. This build will be with Rigid for the entire week of SEMA Check it out if you are going to the show. Just imagine a purpose built vehicle going to SEMA with both driveshafts. This Mojave is ready to go! Follow along to updates to this build as it progresses and the Race Jeeps we are building! #jeepthereisonlyone