How does this compare to the MetalCloak or artec steering system?
@texasrubicon392Ай бұрын
where is the exhaust run, with the tank in the middle? will it fit on a 392?
@RockKrawlerSusАй бұрын
We leave room down the middle and above the tank for the exhaust on the driver side of the tank. For 392 guys in particular do to true dual exhaust and the thirst of the motor, we recommend ordering the system without the tank and then we change the center skid accordingly. Then go with a larger capacity rear tank setup.
@johnheath4305Ай бұрын
Closed cell foam!
@xGR1MxREAPERx3 ай бұрын
Hello. I have a 2021 ram 2500 with 6.4 gas. I want to level my truck and seen you have triple rate springs. I use a 8.5’ western v plow and these springs seems like a great option to help hold the weight of a plow when it’s on the truck but still ride good without the plow on the truck? Have you ever mounted these on a ram with a v plow? Do they work good. Thanks for any help
@BirdDogOffRoadAdventures4 ай бұрын
Ordered your Triangulated 4 link kit from Hammer Built a few weeks ago. Can’t wait to get it on!
@RockKrawlerSus4 ай бұрын
we hope you like it. It is getting insanely good reviews out there. It changes the Bronco for the better for sure in our opinion.
@MrTurbo645 ай бұрын
I just installed your new neutral front top spring isolators on my 2021 wrangler jlur and now the 2 1/2" lift coil springs sit straight. Thank you RK!
@user-lo6yq9eb1o5 ай бұрын
Thank you for this excellent video ! Salute ! When you say flap it down. Meaning cut to make the circumference even ? Flat ? Neutral ? Right ?
@RockKrawlerSus5 ай бұрын
Yes, flap disk the angle out of it to make the coil sit neutral or you can simply purchase our neutral isolators that have been out a year or so now.
@RockKrawlerSus5 ай бұрын
Yes, flat which makes them neutral Or you can purchase these. We have ours out now and they work for most aftermarket coils. rockkrawler.com/front-upper-neutral-spring-isolator-jl-jt/
@jonluchessi16436 ай бұрын
If you want what I feel is the best suspension on the market the best engineered, Purchase Rock krawler, They design their products strong and long lasting I’ve owned 15 jeeps and built all of them & over half of them have all been Rockcrawler suspension, their coil springs are excellent their product is strong and the owner really tries to develop good well developed products for consumers, all my buddies that are own jeeps I tell them all go with rock crawler👍👍👍👍👍
@jonluchessi16436 ай бұрын
Rockcrawler suspension I personally feel is the best on the market, I’m not an engineer but I can only imagine what it takes to design develop and manufacture one small part, I look at the products that Rockweiler makes and every time I get their products I am absolutely amazed I am on my 15th jeep now and I built every one of them and I do it by myself and I’m able to examine each part, I highly recommend rock crawler suspension, the guys that work at the company in sales and tech department really try and go out of their way to help you if you have a problem during an install and even the owner if there’s a problem that can’t resolve he will step in and help. Thanks Rockcrawler I think we are very fortunate to have company like this and have the freedom to build the jeeps and other vehicles the way we want. 👍🇺🇸
@RockKrawlerSus6 ай бұрын
Thank you very much Jon.
@popo_patty6 ай бұрын
Stoked to receive mine and add them to my Steering Series. Your 4-Link is also impressive and on my list
@mattrichardson21378 ай бұрын
Does RK have a list of reputable installers based on locations?
@mattbrew115 ай бұрын
Yes they do. Send them an email
@kimoraarden19838 ай бұрын
Promo SM
@MCLIFE7869 ай бұрын
If the spring coil is longer than my existing coil ? What happens if i put the longer coil ?
@RockKrawlerSus9 ай бұрын
What you care about is the lift height of the coil. The free length of the coil just supports extra droop which is a good thing for suspension travel.
@MCLIFE7869 ай бұрын
@@RockKrawlerSus i just bought my jeep and i don’t know the height i am assuming its 4inch i just replaced the shocks 4-6 inch ones and they installed perfectly and now i am thinking to change the coil springs, right now i got rough country.
@RockKrawlerSus9 ай бұрын
What vehicle are you refering to?@@MCLIFE786
@MCLIFE7869 ай бұрын
@@RockKrawlerSus 2017 JK
@MrMctheking9 ай бұрын
The Adventure Family now has Adventure X. Which is the best of both Adventure series and X Factor. Adventure bushings at both ends but one is Adjustable now!!
@That_Guy_Outside9 ай бұрын
Great explanation. Where’s the link to the advanced course?
@johnheath4305Ай бұрын
Unfortunately, it won’t be available due to head injury
@That_Guy_Outside9 ай бұрын
Great stuff. Love the idea of a course for this stuff. It’s technical engineering concepts that many have opinions on but don’t take the time to understand in detail!
@lisiy1986inh9 ай бұрын
You are talking about advanced course. Tell me, please, will it be on your channel or where could i find it?
@lisiy1986inh9 ай бұрын
Hi! First of all, thank you for tech videos like this, it's very interesting and useful. Could you, please, help me to figure out with grease for joints? As i understood you are talking about NLGi grades. en.wikipedia.org/wiki/NLGI_consistency_number Is it correct? Sorry, but my english is not very good so i didn't understand what grades you mean. You told "zero two". Does it mean "02" or "00"? So did you mean "00" or "0" greases is OK for joints? For joints where metal rubs against metal - should be used NLGi grade 2 grease. Right? Thank you in advance!
@RockKrawlerSus9 ай бұрын
Get mobilux EP1 for all joints!
@lisiy1986inh9 ай бұрын
@@RockKrawlerSus thank you very much!
@raytown049 ай бұрын
Great video and I love my RK lift and ride quality. Video suggestion....how to rebuild those 2.25 RRD shocks. Trying to save on shipping and down time and was hoping to rebuild at home but have never done it before. Thanks and keep the videos coming...great info!
@brainyhead19 ай бұрын
SICK! 💯
@freedomin4low34410 ай бұрын
any plans to release control arms with Adventure Series joints for the Jeep TJ?
@RockKrawlerSus10 ай бұрын
The new TJ/LJ short arms do have Adventure Series Joints at the Frame Connections for the Lowers and we have Retrofit Kits coming for prior customers to replace the old Pro Flex Joints with Adventure Series joints in this position.
@freedomin4low34410 ай бұрын
@@RockKrawlerSus thanks for the quick response! I currently have all Johnny Joints and am looking at the Adventure series to eliminate the maintenance to keep them creak free - both uppers and lowers, so either with new arms or retrofit kits I'd like to replace them ALL with Adventure series if I can....3/4-16" shank on the uppers and 1-1/4"-12 on the lowers.
@grumpy26g10 ай бұрын
I’m trying to get new front track bar for my 2019 Sahara jlu. On a stock suspension and I’m really want to get RK but I’m on a stock suspension ( planning on install a 2.5/3” lift next year) My question is will the RK06187 or the RK06187HD fit on my wrangler on a stock suspension?
@co4x411 ай бұрын
Great video to show my mechanic shop of choice. How long of install should this take for all 8 control arms so that the mechanic doesn't take $ advantage of me. THANX!
@louistiches481011 ай бұрын
Why is there a kit with a rear trackbar and one without? I didn’t realize that there were two different kits when I ordered mine for my JLURD. Would a rear trackbar help with highway driving?
@RockKrawlerSus11 ай бұрын
A rear track bar is not necessary with our systems. We are one of the few companies putting the rear track bar riser bracket in the back to improve the rear roll center which most others do not. It makes a big difference for handling purposes.
@louistiches481010 ай бұрын
@@RockKrawlerSus why do you see kits with them and kits without them? What is the benefit of the new trackbar
@Marty1911 Жыл бұрын
Very informative. It is great to see detailed performance information and not just marketing hype. Well done.
@tombarger2599 Жыл бұрын
I will not purchase or use anything from Rock Krawler until they part ways with Lite Brite.
@tombarger2599 Жыл бұрын
I will not purchase any product from Rock Krawler until they part ways with Lite Brite.
@MrMctheking10 ай бұрын
How come?
@anthonymartinez3208 Жыл бұрын
just met bob last week at nj jeep invasion .super helpful with information about tie-rod and drag link .
@johnheadley7650 Жыл бұрын
Saw this setup at Jeep Invasion Wildwood, 07-15-2023, I'm impressed! I like that it can be tightened as it wears and is joint rebuildable vs replacing ends. when are you making it for stock Superduty width? I believe its 72.5 and a Reid High steer knuckle?
@RockKrawlerSus Жыл бұрын
Hey all. Bob just put our new neutral top springs seats for JL/JT on the website. Here is the link - rockkrawler.com/front-neutral-spring-isolator-jl-jt/
@phillyb4588 Жыл бұрын
What r the flaws
@DeeJones285 Жыл бұрын
Nice. I actually work for an aluminum manufacturer where we make hard alloy shapes like those bars and tons of other shapes.
@jefferyadams3227 Жыл бұрын
I have your 2.25 on my JK. What is the recomended pressure range?
@65dalexander Жыл бұрын
For someone who strictly wants smooth ride at highway speeds with no vibration, which kit do you recommend? Also recommend stabilizer bar?
@RockKrawlerSus9 ай бұрын
Definitely stick with the Adventure Family of products and which one fits your budget. They can all be added to, so you can build up as budget allows. Even the base Adventure System comes with all the proper corrections for your rig so it rides and drives better than factory.
@65dalexander9 ай бұрын
I ended up getting the X-FACTOR 4 1/2 KIT, it rides great!
@boatsandjeeps780 Жыл бұрын
So I was sent the red bushing/raceway for the x factor mid arm rear lower arms and front lower , for the mid arm system, should I call and get them swapped for the black ones. This is for the fixed /welded end not the heim end , or will it compromise flex if I use the red ones.
@legervoile Жыл бұрын
You should upgrade TJ/LJ short and long arms kits to aluminum as well. That would be nice!
@jonluchessi1643 Жыл бұрын
A Jeep will do that but only if you use Rock Krawler components!!!!!!!!! That are engineered developed and made at their factory in good OL USA 🇺🇸 along with their awesome customer service!!!!!!!!!!!!!👍
@jonluchessi1643 Жыл бұрын
I personally recommend this track bar just installed it, huge noticeable difference👍
@RockKrawlerSus Жыл бұрын
Thank you. It is by far one of the strongest track bar assemblies out there and proven everywhere!
@jonluchessi1643 Жыл бұрын
Hello Rockcrawler I want to thank you for all your tech support I just spoke with you this morning in regards to my 392 with the spring bowing inward, I really appreciate how thorough and professional you folks are and for putting up with me when I have a problem, Putting this video together for us and time on the phone I’d like to thank you and Michael, I really feel rock crawler is the best product on the market for jeep enthusiast and I support your company 100% and always will this video is so helpful to me, One thing I’ve noticed about your company is the way you guys engineer things I think you folks are brilliant !!!!! Thanks again you guys!!!
@RockKrawlerSus Жыл бұрын
Thank you Jon. We appreciate the support and hope to have the neutral isolators in stock soon for the entire Jeep Community. We know there are alot of manufacturers that can use it.
@woodystubb686 Жыл бұрын
Goals 👍
@brainyhead1 Жыл бұрын
YES!
@joshkoch3722 Жыл бұрын
Someday hopefully it will!
@S-R-G Жыл бұрын
My 23' JLU Rubi 3.6 has these same isolators. Pretty dramatic inward bow with the teraflex coils. Thanks for the update; will keep eye out for part.
@RockKrawlerSus Жыл бұрын
Yeah, unfortunately it effects almost everyone's coils. The new neutral isolators should in March of 23.
@S-R-G Жыл бұрын
@@RockKrawlerSus Any updates?
@RockKrawlerSus Жыл бұрын
@@S-R-G The parts are in. RK08244K is the pair of universal spring seats for JL/JT. They retail for $29.99
@S-R-G Жыл бұрын
@@RockKrawlerSus ty!!
@S-R-G Жыл бұрын
@@RockKrawlerSus cant seem to find them on the web
@mcoffroadinaz4075 Жыл бұрын
you need to sell ONE kit for both ends. Trying to find all the parts (diff collars on each end, etc) would be a smart move.
@paulthompson6357 Жыл бұрын
I can confirm this absolutely works! My buddy has a Rubicon JT Diesel. He made these recommended changes and now his springs are perfectly straight. The rig rides great with no rubbing or spring noise. Great job to RK for isolating (pun intended) the issue and creating a remedy.
@joshkoch3722 Жыл бұрын
Great info and update JP!
@RockKrawlerSus Жыл бұрын
Thanks Josh. We wish Jeep would give the aftermarket a heads up, but NO.
@Marty1911 Жыл бұрын
Since there are no tire clearance bends in the arms will they require wheels to be spaced outward more than is typical to gain tire clearance?
@CallaFab Жыл бұрын
I'm curious about this as well. What wheel backspacing is needed?
@MrMctheking Жыл бұрын
@@CallaFab Wheel backspacing is found on the lift pages.
@TheAndrewBailey Жыл бұрын
Glad to see you guys are offering this as a commercial option! I've been doing this for years using your joints. This makes the option that much easier to purchase the complete setup in house. Killer product!
@StormbornJKU Жыл бұрын
It’s crazy how well built control arms are getting. Almost makes me wish I was still on a mild build with mid arms lol
@joshkoch3722 Жыл бұрын
Can’t wait to get my hands on a set of these for my JKU! Thanks for the info JP!!