2023 Yakima LockNLoad Platform and RuggedLine Spine - Quick & Easy Install - ​⁠@YakimaRacksOfficial

Here I show you a step by step install guide of the ​⁠@YakimaRacksOfficial LockNLoad Platform and RuggedLine spine mounting system to our new 2023 Y-62 @Nissan Patrol in our awesome segment...
Grab A Quick Mod, With The Dad Bod!
-- Product numbers specific to the Y-62 Patrol --
Platform N 1373W x 2130mm L (pre-assembled).
SKU: 9820373
RuggedLine Mount. SKU: 9841004
-------------------------------------------------
Thanks for checking us out LEGENDS!
Hitting the LIKE & SUBSCRIBE button not only helps us out (for free) and tells us we’re doing bang up job, but it also gets us (and you) closer to our next GIVEAWAY which we do every 100 SUBSCRIBERS with the next one slowly approaching🙌🏽
Check our Insta for details!🤙🏽
-------------------------------------------------
Check out Outback Equipment for all your 4x4, Caravan Camping and Outdoors needs including roof racks!
bit.ly/41usDs2
@OutbackEquipment
-------------------------------------------------
For best screw in pegs on the market, check out Outback Tracks!
www.outbacktracks-au.com/
And if you use the DISCOUNT CODE: GRABLIFE
you'll save some coin at the checkout!
-------------------------------------------------
For all your Music and Sound Effects needs, check out Audiio.
ref.audiio.com/st97y444
-------------------------------------------------

[@AdventureTimMedia]

Good job .mate. well done and well put together. Your intro was very good too.

[@GrabLifeByTheGourlays]

Thanks Mate, really appreciate it!👊🏽 Which part of the intro again?

[@theshop5331]

go up from the back, use pillows on the leading edge, they will move with the rack as you push it forward, your mileage may vary, nice job, your rig looks great

[@GrabLifeByTheGourlays]

Using pillows and going up from the back sounds like more fun! 😉 😂 Hey if there’s an easier way to do things, I’m all for it! Thanks for the tip! (That’s what she said!)

[@jelbuilderfilms]

I love Yakima products.... Great video 👍👍

[@GrabLifeByTheGourlays]

Thanks mate! She’s our firsf but I don’t think it’ll be our last as the quality is pretty damn good! Probably get the shovel holder next! 🤙🏽

[@OurAdventuresDownunda]

Well done buddy

[@GrabLifeByTheGourlays]

Thanks mate! It’s the first of many though the majority of the “Lap Ready” mods will be done at Ontrack 4x4 this week!🤙🏽

[@13breno13]

Hey mate, great vid. Do you get any noticeable wind noise after having the racks on?

[@GrabLifeByTheGourlays]

It is fairly quiet compared to my rhino rack I had on my previous Fourby!

[@johnpatricknelmida3450]

I have a honda pilot trailsport 2023 whats the best flatform size and spine is the best i can get.can you help out?

[@GrabLifeByTheGourlays]

Wow, that’s a nice vehicle! You’ll have to check the USA website for dimensions as Australia unfortunately doesn’t sell that Honda! 😔

[@waynesworld6896]

what part number for that one mate....there are a few different ones arn't there?

[@GrabLifeByTheGourlays]

Thanks for the reminder, I just updated it! 🤙🏽 but here it is! -- Product numbers specific to the Y-62 Patrol -- Platform N 1373W x 2130mm L (pre-assembled). SKU: 9820373 RuggedLine Mount. SKU: 9841004

[@liang2512]

It looks like all the weight of the rack is sitting on those brackets and pivot mounts?

[@GrabLifeByTheGourlays]

But the load is spread along the rail!🤙🏽

[@liang2512]

Have you exprienced any sort leaking since installation of this spine system?@@GrabLifeByTheGourlays

[@aussienscale]

Nice vid mate, how much height do you think it added ? love the look of the rack, but have to be mindful of overall height once I have tyres and suspension done on my 62 to fit in the garage still :) Cheers

[@GrabLifeByTheGourlays]

Thanks mate, really appreciate it! We have a 2 inch lift with standard tires and it just fits under 2.1m in the car park shopping centres! Tested the wind noise yesterday while towing a 3.5t ATM van up to the Sunshine Coast from Brissy and it was fairly quiet!

[@michaeleyles6434]

@@GrabLifeByTheGourlays Thanks for the video any chance you could measure the height from the top of the rack to the top of the roof?

[@GrabLifeByTheGourlays]

@michaeleyles6434 can do when I get home

[@GrabLifeByTheGourlays]

@michaeleyles6434 hey mate, just measured and it’s 160mm from bottom of spine to the top. Hope this is helpful!🤙🏽

[@michaeleyles6434]

Cheers

[@edwinb5469]

What if I have roof rails . Will it go higher ?

[@GrabLifeByTheGourlays]

If you mount it to the roof rail, it may be higher, depending on the height of the roof rail of the vehicle!

[@edwinb5469]

@@GrabLifeByTheGourlays yea . I just installed the rails only which gives a better look . I'm going to get the roof platform but want to make as flush as possible. Thanka

[@GrabLifeByTheGourlays]

@@edwinb5469 the spine will give you a stronger fit and will most likely be lower profile

[@edwinb5469]

@@GrabLifeByTheGourlays when you say spine , youre talking about from this same hakima platform?

[@GrabLifeByTheGourlays]

Yeah because the spine runs along most of the platform and spread the load but I’m sure the roof rails will be ok if you can get mount to fit

[@onenation7784]

Where can I purchase this product for a Toyota Tundra

[@GrabLifeByTheGourlays]

Where are you based?

[@GrabLifeByTheGourlays]

If you’re in Cali, the Rack Shop will sort you out!

[@onenation7784]

USA California 😊

[@onenation7784]

Can you give me information on rack shop ? Thanks

[@GrabLifeByTheGourlays]

🤙🏽