2023 Yamaha MT10 Pipewerx R11 Carbon Underslung Exhaust Install... Wasn't fun

[@monjue4459]

After watching that, i would never buy Pipewerx.. that was really bad. sorry you had to go through that.

[@robertsharman3557]

You should have sent that exhaust back mate shocking workmanship I wouldn't bolt that to my pride and joy

[@gingerpunk2]

Just to echo everyone else really. You're a champ for getting through the install and not sending the lot back for a refund. I also considered pipe works. Not anymore 😂 chair break was classic too. That shit happens to me all the time.

[@sergeantsodom6969]

Cheers mate 🥲 never a dull day round here

[@Carvetii]

I put a Pro Race on my MT10SPand its superb build qualityi actually left my cat on and got it flashed as the stock cat is a high flow cat anyway which was the advice given at junction 33 who tunes all my bikes

[@TheGray1967]

Would not be paying for that shite , I know it ain’t the most expensive of exhaust , would be telling pipewerx where to stick it 🤮🤮

[@kyled4156]

Wow! Sorry you had to go thru all that shit my friend, but the main thing is your happy with it! Does sound very nice! Looking forward to the test ride.🤙 ride safe brother. 🙏

[@superten1780]

I’ve being watching you vids today and just to see you fall off the chair was enough for me to subscribe 😊

[@sergeantsodom6969]

I'm glad my dickery enticed you in 🥲

[@superten1780]

@@sergeantsodom6969 really enjoying your vids mate

[@sergeantsodom6969]

@superten1780 welcome along to the ruckus mate!

[@coso6708]

Ive just fitted same exhaust to my 2018 had the same issue with the headers not lining up they where too wide. Used a joinery quick clamp and got it on. The hardest bit for me was removing the cat i had to bash it with a lump hammer and bend it with a screwdriver. I agree the welds are poor but they do what they need to do they dont blow and the exhaust sounds brilliant though took me about 3 hours from start to finsih today

[@stevecade857]

Thanks for taking the pain. Maybe the Pipewerx jig was for gen 1 bikes. Either way it was a bit strange how the replacement went on without issue. Some pretty big tolerances they must have. Doesn't provide me with much confidence tbh. The fact the O2 sensors don't fit with the pipe fully seated when they've made allowances for them in the link pipe beggars belief. I really hope they get it sorted as I love the look of the pipe and was seriously considering one but now I'm hesitant. Waiting to see how your stressful escapade turn out before I do more my own research and pull the trigger on one. Sounds great though and can't wait to hear it on a run.

[@Charlie-fc1mh]

Research is everything. There's a place in Long Crendon called Good Fabs. They make all kinds of pipes for cars and bikes. I know for a fact that that there quality is second to none. As far as the end can, I've never even heard of pipeworx.

[@UnCivilEngineerIRL]

Those welds are pretty scabby in fairness...

[@101steel4]

What a mission. And yeah the welds looked a bit crap. But the main thing is its sounds fantastic 👍

[@mattchrich957]

Fair play for sticking with that mate, must of been really frustrating. I think I'm going to avoid and go racefit as there just down the road from me.

[@Yii00T]

That link pipe is absolutely shocking.

[@garyhutson6361]

You got there in the end. What a pain. I would of sent it back. So many on the market to chose from. I put a akrapovic mid pipe and used standard end can. Then got long pipewox can only for track. 02 sensors should of fitted no matter what. Sounds great tho. Best part of the yamaha's 👍🏼

[@scottdiver36]

Sergeant sounds sick

[@scubasteve3293]

exhaust sounds good, those welds are shitty man, u are right paying all that money it should be top notch

[@animal100000]

What's a rachet?..........bit bigger than a mouse shit 😀 Them welds are shocking mate glad you got it sorted sounds awesome 👌

[@sergeantsodom6969]

Made me fucking laugh that mate 🤣🤣

[@mrmojosrisen7514]

@@sergeantsodom6969 Crikey! you not heard that one before? Mind you I did work in garage most of my life.

[@vanmonkey675]

I had the Gen 1 and put the exact same exhaust on it ! And I had exactly the same problem ! That’s back in 2016 ! I used a clamp across the header pipes to squeeze them together so I could get the link pipe to fit it was a proper ball ache and that’s on stainless headers ! So the headers now being titanium has absolutely nothing to do with the sizing ! Although that pipe does look and sound good I won’t be going back to Pipewerx for the exhaust for my Gen 2 ! Sorry but piss poor on there geometry ! On a brighter note I’m enjoying your videos 👍

[@sergeantsodom6969]

Thanks mate, welcome along!

[@vanmonkey675]

My pleasure 👍

[@cbrblade2705]

looks very nice, and sounds great. It does seem strange with the quality issue of the welds and the link pipe in general. I just had a look at delkavic site, and on there systems you can see the o2 sensors are a lot closer to the ends of the 2 pipes, hmm. If it was me in pipewerx, as soon as I would have got a few picks of the link pipe I would have sent another one out, quality control seems to be a bit amiss, almost as if the link pipe and end can were done by two seperate companies.

[@Mancastle]

Pretty hilarious, you mentioned about black widow, scorpian and the other general slightly cheaper brands providing way superior quality in terms of condition on the welds etc. This is like some aliexpress type shit, the pipe looks good though and you generally don't see them parts so i guess it's not the end of the world. Just sad especially when customer service doesn't even acknowledge the clear defects and shit welds

[@R6TT]

Mate what a hassle… I fitted a Scorpion Decat Exhaust yesterday was the easiest job I’ve ever done slid right on no problems at all

[@stesh101]

U can buy 2nd hand link pipes and cans cheaper than that new pipewerx crap. Got a scorpion like new for £350 and fitted no problem.

[@MegaMaxymoo]

Great channel...Did you tell your insurance it is in a locked garage? If it is a shed with no foundations it doesn't count apparently

[@mrmojosrisen7514]

had the titanium version on one of my zrx, was a good budget end can until I got a proper titanium full system.

[@scottdiver36]

Sergeant that was so funny hope your safer on your MT10 than your stool 😀

[@sergeantsodom6969]

Me too mate or I'm fucked 🤣

[@scottsspeedtriplechannel]

Glad you got her done mate. Could you reverse the long bolt, put the head on the inside and the nut on the outside?

[@sergeantsodom6969]

Think it would be a similar issue due to the spacer. However, after riding this for a few weeks since I installed it, it doesn't seem to have interfered at all which is good

[@Yii00T]

Ali Express systems fit and look 💯% better welds. Also way cheaper lol.

[@CAKEface75]

Thanks for the laugh 👍🏻😂

[@sergeantsodom6969]

Happy to help 🥲

[@johnvalentine8198]

Welds did look shite I’ve got pipewerxz and it’s brilliant must be someone else doing the welds they need to go bk to sweeping floor in shop 😂

[@northernscum8228]

Not a time served welder who done that, looks like it was done without any shielding gas and by the window cleaner🤔Anyway it still looks and sounds brutal Sodom👍👍

[@vinterland7680]

Not the best advertisement for Pipewerx. :)

[@grenphelps7455]

That's not right, I've got the same bike with a Leo Vince decat and that just slide on with no effort....

[@markjackson7650]

That's a real bummer that the quality of the pipewerx lonk pipe is so bad as that was my preferred exhaust for my mt10. I'm not surprised though as a lack of skilled labour in manufacturing in the uk is rife right now. See it all the time in my work we're so desperate for welders that they are willing to employ absolute imposters.

[@Stanley88845]

That's the quality you come to expect of a cheap eBay special. It's frankly embarrassing for Pipe Werx.

[@scottdiver36]

Sergeant they shouldn’t email you like that just replace SP Project have been first class your paying a lot should be right

[@joshuarose4363]

Bite the bullet get leo vince or aqpovic

[@sergeantsodom6969]

Check my latest videos ;)

[@Charlie-fc1mh]

Lmao, I'd be sick and tired of talking to those guys. They would be giving me a refund.

[@Mr450pro]

No way in hell! You should have sent it back! That’s definitely not normal.. you have to use ratchets come on, I have never had to or ever heard of people who had to use ratchets. I will never buy anything from that company!

[@sergeantsodom6969]

Ridiculous isn't it 🤷‍♂️ I'd just given up by the end. there was too much going on personally at the time and I was tired of going in circles

[@darkarch1998]

This is awful work from pipeworx in my opinion, ratchet straps and an o2 sensor delete just to get an exhaust to fit as atrocious. I had an eBay exhaust that fit better than this