2024 Beta 300RR Race Edition | Carapaks Offset Foot Pegs | Extreme Parts Levers | S3 Tugger Strap

[@rrabbat30]

You can also take the pins out of the Beta pegs and install replaceable cleats, if you are on a budget

[@highlandcycles]

Where do you get those?

[@rrabbat30]

I saw someone else do it on line. Motosport outlet sells replacement cleats, you'd have to drill and tap em for the cleats. I thinking of doing it for my older beta @@highlandcycles

[@d.brayman3165]

Cool parts. I wish I could get them for my old bikes.

[@greeneman99710]

Just ordered some for my 24 Beta, thank you for the discount code.

[@masterbeta343]

i had the S3 steel pegs that are the similar design and they totally chewed through my sg12 soles. ended up putting the stock pegs back because of that.

[@highlandcycles]

I have had these on my KTM for a while and my SG22's are holding up well.

[@Josh-Silvia]

I was going to ask about the S3 punk pegs. They tore up your boots huh? Sorry, but glad I heard it before I bought them.

[@masterbeta343]

@@Josh-Silvia theyre good pegs but i think its just how i stand on the bike. It mostly only happened to the left side. I guess i stand very consistently on my bike so it was always wearing in the same place. The teeth basically ate grooves into my boots.

[@Josh-Silvia]

They look sharp for sure but they also looked like they’d clear mud really easy, which comes in handy around here. I’m still on the fence.

[@masterbeta343]

@@Josh-Silvia mud is a big issue for me too. They definitely do clear out super easy. YMMV

[@randytidwell5836]

I like the down and back pegs too. i put them on all my bikes for the last 10 to 12 years

[@onthethrottle7104]

Good feedback. Do you run 5MM down and 5MM back or?

[@randytidwell5836]

I have always run the fastway, 10mm down and 10 back. I run the lowest cleats in the pegs.

[@onthethrottle7104]

@@randytidwell5836 Appreciate the feedback, I'm going with the 5 and 5. Thanks again!

[@zachfarkash6430]

Bike is looking good, those foot pegs are sweet wish they had the for my 89CR250R 🤘🤘

[@sampon9328]

i like my motoes offset pegs on my woods bike, should give em a try sometime

[@CW-up7xv]

Just do the s3 punk pegs. They are like $100, steel, clear mud excellent, and even come with those pins you bought. Best footpeg deal I've ever found

[@highlandcycles]

I’ll check them out.

[@timturner304]

You should try the flo pro 160 levers. I don't know if you ever looked into them or not but they're pretty sick I have a pair on my bike And my buddy put a pair on his brand new bike

[@thomasbrun8695]

As a beta 300 owner and fellow rabbit hole dweller … why the lower pegs for hard enduro ? Those frame peg tabs snap pretty easy especially with SS pegs

[@highlandcycles]

It is good for getting weight back and low for traction

[@seamarsh3756]

offset pegs vs tall seat? i know jimmy lewis likes tall seat vs changing peg height, haven't tried either.

[@highlandcycles]

Really depends on what you’re trying to accomplish. If you’re just trying to make the distance from sitting to standing shorter then tall seat. If you are trying to change weight bias on the bike (what I’m doing) then pegs.

[@randytidwell5836]

I couldn't hear what brand the fork clickers are, do they make them for showa forks

[@lostinpa-dadenduro7555]

They are from Costa Special Parts.

[@randytidwell5836]

thanks I checked them out they had the adjusters for the showa forks just not for the 49mm.

[@lostinpa-dadenduro7555]

@@randytidwell5836 That’s a bummer. If I recall, Zeta makes something similar. Maybe they have the right size.

[@Zombierippa]

I wanted to ask which Maxxis tire is on the back? Thanks

[@highlandcycles]

It is called the enduro. I haven't ever seen it before

[@lostinpa-dadenduro7555]

What hour meter multiple setting do you use for the dual plug?

[@highlandcycles]

Hahahahha

[@1176hambone]

why don't you run full wrap hand guards?

[@highlandcycles]

They make the bars too stiff and I like the freedom of not having wrap arounds

[@richardhartley1705]

👍👍

[@nightrider4370]

Slavens said he likes Betas but the motor is down on power. The internet claims 41 horsepower. What do you think of the motor compare to your 300xc?

[@highlandcycles]

Bwahahaha. He whined about the XC being too much. What a dork. It definitely isn’t as “fast” as my XC but it grunts down low better

[@nightrider4370]

@@highlandcycles I know. The internet is crazy. Lol. I like Jeff. He gets alot of flack about being crabby lol. I think you're both straight forward guys with alot of knowledge. He wasn't ripping on the Beta. He just said he prefers the KTM. I just wanted to see what you think. The Beta looks fantastic.

[@highlandcycles]

@@nightrider4370 they are just very different. In my opinion you should really have both.

[@nightrider4370]

@@highlandcyclesis the suspension on the Beta stiff for your skill level or fits you pretty well?

[@MrJacksmithFTW]

I never use those stupid pull straps. it's ridiculous you have to take off your forks to do it. I usually use the acerbis one which have a double D in the end and you can put them on without taking anything off, I usually put some zipties around the bottom triple clamp so that they don't go down

[@highlandcycles]

I don’t mind taking my forks off. It’s super easy and I do it every 40-50 hrs to service the suspension

[@zackiaryruddick701]

I'd never change from stock leavers to them junky style of leaves they have no feel to them their all sloppy can't control the clutch nor would i run them sharp pegs they will cut you to pieces if you crash

[@highlandcycles]

Hahahaha. Ok. To each their own

[@rickvonderchek6898]

Have you tried the dual starter switch replacement for the 2023 2024 Ktm300 xc that 1st track Motorsport sells ? Has a great price point more than have the cost of the nihilo or the enduro engineering ones

[@highlandcycles]

Yes. Zach’s bike has it. Works great