Y’all using 50mm axles now? Looks like 600 rears. We use 710’s but I can’t tell lives like some 50’s
@SennaS1994Ай бұрын
@@douglasrink we are using a 40mm axle, but some are using 50mm…depends on chassis manufacturer. Our series uses 600 rears, but when we race CKNA, they allow 710 rears
@douglasrink2 ай бұрын
Hard to bump draft 377 he’s fast just too tight. Freeline axle is junk if you’re over 5.5 tall. He needs another axle longer
@SennaS1994Ай бұрын
@@douglasrink we use freeline and the driver is 6’1”.
@douglasrinkАй бұрын
I mainly race at go pro MOTORPLEX in mooresville NC I’m 6 ‘ we use 710’s instead of 600’s on the rear. We were always fast with that axle early on and in cooler weather but it gets hot in NC so we tried IPK medium/soft and it gave the Kart a lot of camber in the rear or basically used on the inner portion of both rear tires and completely freed up the kart. It took getting used to but we could use much less caster in the front might be different in Canada
@SennaS1994Ай бұрын
@@douglasrink we struggled to get set up last year, a lot. Our biggest stride forward was our seat…Tillet T9.5. It brought his head and shoulders lower and stoped us 2 wheeling. Other than that, we run mostly F and M axles depending on temps. Stock B only if it’s wet.