2024 Umarex Berretta PMX GBB SMG Review

Рет қаралды 9,494

4 ай бұрын

We take a look at the brand new Umarex Berretta PMX GBB SMG, we put this outstanding SMG to the test and tare it down to see how it all works.
This could be one of the best GBB SMG's for the price!!!!.
*** Attention This is an Airsoft Toy and not a real Firearm, there are no Real Firearms in this video or any of my videos ***

Пікірлер: 35

@AnthonyGarcia-so2ek 4 ай бұрын

That's crazy.. we are finally getting the new Beretta PMX and the B&T APC9k pro. These gbb are gonna be a gamechanger probably gonna go with this smg once it gets to Evike Alhambra 👍🏼

@ucanhascheeseburger 4 ай бұрын

Thanks for the review, really appreciate the in depth look into these recent releases. One thing that I'd love to suggest for future videos is to include some sort of performance test or anecdote with cold weather/cold magazines (e.g. putting the mags in the fridge for a bit and then testing them to see how they fare in the fall/winter time). And on that note, how would you rate the PMX's cold weather performance? 😄

@JLouis-uf9iz 4 ай бұрын

very nice

@tentoma 4 ай бұрын

見せて下さり、ありがとうございます🙇♪💖

@e0001030 Ай бұрын

The hop unit looks a bit better now. ALL my previous KWAs has issues of hop being removed too easily during game - In the first session it is right, in the second it drops.

@Angrypanda68 4 ай бұрын

Got to see the real one of these at the DSEI show last year. This looks great . Is it a trilug muzzle , have you found a suppressor for it yet?

@MiddleAgeGameruk 4 ай бұрын

Hi there, yes, the muzzle is trilug, and I use the mp5a5 NGRS trilug adapter.

@AirsoftGasBlowback 4 ай бұрын

Did u see that vfc is releasing a gbb v3 m1101a1 around third or fourth quarter this year 😮

@tylerblalack6684 4 ай бұрын

How unique 😮

@James-rd1se 3 ай бұрын

After playing for two weeks, I have some conclusions that I want to share. This pmx is affordable, can be used with mp9 mag, and is very light. But there are a few points that you should pay attention to. You must pull and release the bolt firmly (pull and release suddenly). The bolt may not be fully retracted or the hammer may not be fully hooked and may not fire. The flash hider is suitable for MP7 12 to 14 reverse tooth adapter. The stock is too long, which is a bit difficult for CQB or short boys and girls. Let’s see if we can use 3D printing 1913 stock. People who pursue recoil can be deterred. It is smaller than AEG. , if I can’t afford the reload of 0.3 or above, I need to replace it with hop up glue (universal F90 gauge). The inner tube seems to be a special gauge and I want to make it longer.

@LucaSergi-td9dj Ай бұрын

Do you know if the mag is the same of mp9?

@douglassoal6196 3 ай бұрын

I returned my mag as it started not feeding up bb’s, it would fire a couple, and then the follower would get stuck and I would have to remove the mag and pull down on the follower so it went back up, then it would repeat. Tried various brands of bb’s, same result. Got sent a replacement mag, same problem. Then I found they are extremely fussy in the way you stack your bb’s, I always load mine without a speed loader and always stack them carefully with no gaps. But on these, at least for me, the right hand side bb’s have to be in the lower position, then they feed fine, reserve that with the left side bb’s lower and you get the feed issues.

@MiddleAgeGameruk 3 ай бұрын

Hi there, thanks for the information 👍. I haven't had the issue with this, but I have with the kriss Vector gbbr, I found that the follower would get hung up towards the top for some reason. I used a Q-tip to clean near the top on both left and right sides of the track, and since then, it worked fine.

@douglassoal6196 3 ай бұрын

Good tip, I will do that as well.

@tisluca7831 4 ай бұрын

How does it work with a vmp1 magazine? Because I have a vmp1 with 6 mags and don't feel like buying other mags again

@MiddleAgeGameruk 4 ай бұрын

Hi there, I have tried both the mp9 and the vmp1 clone mags, I found that yes you can sort of fit them in the airsoft replica but they do lift the bolt carrier up and that means the nozzle hits the top of the bucking and can cause unintended wear, also I would get failure to lock back and sometimes miss-feeds. If I find a fix, I will post an update. Hope that helps.

@yoonbrody2934 4 ай бұрын

Question. Is genuine internal part good enough for gaming? Heard that many of part such as nozzle and chamber are not durable enough and need to change it. Do you find out any issue with it?

@MiddleAgeGameruk 4 ай бұрын

Hi there, the KWA Berretta PMX is good to go out of the box. The hammer is steel, and the nozzle tip and loading arm are zinc. The hop chamber is more than enough for gameplay. This is KWA's updated internals for 2024 and beyond. Hop that helps.

@yoonbrody2934 4 ай бұрын

Thank you for your kind explanation! Any recomendation for replacement for genuine part?

@jhzfn 4 ай бұрын

It’s like they repurposed the fKWA Original Lucy-4 in GBB form. Presume it leverages some learnings from the Lithgow Arms development. If so, it may be a nice alternative to the GBB Vector given the same price point but without the first gen issues. Hmmm…

@MiddleAgeGameruk 4 ай бұрын

Hi there, please stay away from the krytac kriss Vector gbb. It's definitely a case of I bought that, so you don't have to!!!!. The berretta pmx is definitely the better replica.

@keyboardcommando5146 4 ай бұрын

@@MiddleAgeGameruk😅 looks like those KWA vectors are going to rise in price!

@kakuwave 4 ай бұрын

Beretta with one R please

@rustegothebuilding 4 ай бұрын

Hi veciooooooooooooooo 😂

@bogeyedtortoise 4 ай бұрын

do thos mags work with the mp9?

@bogeyedtortoise 4 ай бұрын

i would assume so because of kwa

@Takedownairsoft1 4 ай бұрын

Tec 9 feels

@MiddleAgeGameruk 4 ай бұрын

Hi there, the company who made the tech9 went bankrupt in the early 90s, and the rights sold to B&T, who used them to make their MP26 a modern tech9. In approximately 2010, Berretta bought the rights off B&T and used them to make the PMX. A crazy history but that explained the tech9 vibes