Forgot to mention, after 2k+ rounds over 4 days, none of the common issues have appeared. As always, I will update this comment if anything changes. 1. After a closer look into the QD sling attachments points, it seems like the lower casting issues are still there. I did see it during filming but they were so dark, I thought it was paint that had flaked off from the QD slot. 2. Another quick note, the receiver wobble varies, many had the receiver tight ootb, this does make it hard to push out the receiver pins, while mine was pretty easy with fingers. 3. Just like all the other APFG MCXs, one of the screw holding the auto trip bar will loosen and fall out of the upper receiver, if you don’t notice.
@desertstriker85 ай бұрын
What’s exactly the issue?
@Airsoft_Chay5 ай бұрын
@@desertstriker8 basically, there are little bubbles in the lower receiver.
@aquatixofficial78685 ай бұрын
I have the real spear and this gun is almost perfectly identical
@Airsoft_Chay5 ай бұрын
That’s what every gas blowback owner wants to hear lol
@bigrig85392 ай бұрын
sure you do
@aquatixofficial78682 ай бұрын
@@bigrig8539 bought it last December, 11.5 with a 556 caliber. If you can’t afford it just say so.
@imitenotbeАй бұрын
@@bigrig8539 poor AND jealous? damn lmao
@moorusfaan54645 ай бұрын
This might be some of the best airsoft overview video I have ever seen. Short, to the point, numbers given. Damn good.
@Airsoft_Chay5 ай бұрын
Thanks man! I’m glad the videos are good haha.
@sd52413 ай бұрын
Rifle sounds scary! I might order it.
@Airsoft_Chay3 ай бұрын
You should, it’s nice.
@xiul8r5 ай бұрын
would love to see a review on one of the toxicant mcx's, would be interesting to compare the two i think. keep up the good work for us gbb guys, man!
@Airsoft_Chay5 ай бұрын
I would definitely do one if I could get it for a good price, those things are so expensive. Thanks man!
@lofighost88115 ай бұрын
@@Airsoft_Chayand plagued with issues
@Airsoft_Chay5 ай бұрын
@@lofighost8811 yeah they are pretty bad for the price.
@Forkuh5 ай бұрын
@@lofighost8811gotta disagree. I have the rattler and aside from mediocre fitment on the handguard, it’s run immaculately for a thousand rounds so far.
@lofighost88115 ай бұрын
@@Forkuh oh no im talking beyond 5k rounds and consider urself among the lucky few who didn't get a complete lemon, they are super overpriced for what they are "literally an MWS" and my experience with toxicant's customer service lived up to their name....toxic af, tried asking about some of the internals and whoever was running their ig essentially asked me if i have ever heard of an MWS and to make my conclusion on the internals with that
@bigredinthewild5 ай бұрын
Thanks for the informative vid, Chay. I kinda wish there was a kit version or a receiver core where I could select barrel length and stock options. Time will tell if that comes to market, though.
@Airsoft_Chay5 ай бұрын
Glad I can help! That is a great idea actually, these companies should start looking at what the consumers wants, haha.
@bigredinthewild5 ай бұрын
@Airsoft_Chay For sure! Definitely a compelling package right now. Lambda with their GHM9 is currently doing that: buy the base BB blaster, choose all the peripherals, accessories, etc. But it certainly helps to have a full package for those who aren't interested in "building" their setup.
@Airsoft_Chay5 ай бұрын
@@bigredinthewild Lambda is definitely ahead in that aspect, they have a huge selection! Hopefully manufacturers will see and do the same.
@johannesbjerkejannesson4284 ай бұрын
Great video man! Keep em coming!!👍
@Airsoft_Chay4 ай бұрын
Thanks man, I will!
@cupcakefights5 ай бұрын
Excellent review. Want to get back into airsoft and clone some of my real blasters but wow these toys are expensive now. Weather is cold in my area so a GBB probably isn’t a wise choice unfortunately
@Airsoft_Chay5 ай бұрын
Thanks! Gas blowbacks are definitely viable in cold weather, I would recommend you look at either VFC V3 ARs or TM MWS, depending on performance or realism.
@Lt.Chris9095 ай бұрын
you can use nimrod red/black gas to overcome to colder temps or even HPA tap the magazines if you don't mind the HPA line
@Airsoft_Chay5 ай бұрын
@@Lt.Chris909 red and black gas is something I need to try!
@oranda20005 ай бұрын
Does the weaker springs increase recoil ? Btw, it's nice to see the hammer screw mod in action, definitely a lifesaver under cold weathers. Nice video, wish I had the money to get it
@Airsoft_Chay5 ай бұрын
Kind of? I wouldn’t say it increases it but more like changes it. The stiff recoil spring causes the fire rate to be super high, so the recoil is really violent and quick. While the weaker spring is a slower fire rate, so you feel it more.
@Bravo_6_Going_Dark2 ай бұрын
They need to do a forge receiver version. that i would buy
@desertstriker85 ай бұрын
Great video!
@Airsoft_Chay5 ай бұрын
Thanks!
@andrewj.54515 ай бұрын
Great review! One question in terms of purchasing: How was shipping from proactstore? Was it pricy or not too bad?
@Airsoft_Chay5 ай бұрын
It was 150$, you also pay for paypal’s G&S fees.
@ColtyCraft3 ай бұрын
I have been looking for one of these for a while, where did you get this?
@Airsoft_Chay3 ай бұрын
It’s in the description
@DoaneTactical5 ай бұрын
I want to get back into Airsoft for a training tool. I have a Spear LT as my "fighting" rifle. I have the 16" variant. Will there be 14.5" or 16" varant available in the GBB Airsoft Replica?
@Airsoft_Chay5 ай бұрын
I am not sure, only the 9 and 11.5 are available for order.
@AfroMocha2 ай бұрын
Needs a bit of a cleaning there put gas blowbacks you got to make sure you're cleaning after every single like match every single game session
@Airsoft_Chay2 ай бұрын
Only every game if it’s an outdoor game, indoor games are a lot cleaner.
@AfroMocha2 ай бұрын
@@Airsoft_Chay I had a Glock blow up on me the slide just flew right off the bottom housing I don't know exactly what happened but it was very bad. I just make sure personally that I clean every game plus I also finding a little therapeutic stripping it down cleaning it putting it back together.
@Airsoft_Chay2 ай бұрын
@@AfroMocha must be a lemon or luck. Absolutely, cleaning it and putting it back is one of the best experiences with owning gas blowbacks.
@AfroMocha2 ай бұрын
@@Airsoft_Chay wasn't the best versions I like KSC or something like that
@Airsoft_Chay2 ай бұрын
@@AfroMocha that’s probably why haha
@gincrystal77565 ай бұрын
NICE
@Airsoft_Chay5 ай бұрын
Yep
@ChaseHeadworthАй бұрын
where did you purchase i cant find a reliable place to have it imported by
@Airsoft_ChayАй бұрын
@@ChaseHeadworth proact, it’s linked in the description.
@PhiL-zz6cu28 күн бұрын
@@Airsoft_Chayit’s sold out there, I also can’t find a piece to buy unfortunately
@Airsoft_Chay28 күн бұрын
@@PhiL-zz6cu They got another batch coming soon
@PhiL-zz6cu28 күн бұрын
@@Airsoft_Chay can you please upload a video where you test this Softair with Nuprol green gas and red gas at 0,28g BBs (maybe also at 0,25 and 0,30g) but mainly 0,28g BBs how much Joule it got with those different settings and how precise it is with those different settings (I am asking because my CQB field has a limit of max 1.19 Joule) and I want to know if this Softair is playable there and a good pick… 🤔 Thanks for the updates and feedback! ✌🏻
How does it compare to the HK416A5 Gen3 gbb by VFC?
@Airsoft_Chay2 ай бұрын
@@PolBlanesCebrian For the price, I would go with the hk416. Theres a lot of kinks that needs to be ironed out with the mcx platform.
@PolBlanesCebrian2 ай бұрын
@@Airsoft_Chay Thank you!
@payne94495 ай бұрын
Hello thank you for the review! Between this and the VFC HK416a5 v3, which one is better? Cheers
@Airsoft_Chay5 ай бұрын
Hey, no problem! I would say that if you want something M4 style but kinda unique, the Spear LT is super cool. But QC wise and out of the box performance, the HK416A5 is better.
@GR4MPIАй бұрын
It is 16,800 for real ? I can buy two cars for that
@Airsoft_ChayАй бұрын
@@GR4MPI thats not in USD.
@GR4MPIАй бұрын
@@Airsoft_Chay ahh 😂 i see thanks.. thats not bad price, for that money they are selling aeg version in my local store
@Airsoft_ChayАй бұрын
@@GR4MPI Yeah that would be madness lol
@chubz65125 ай бұрын
y u circumcise the magpul?
@Airsoft_Chay5 ай бұрын
It looks kinda cool lol
@davidem82155 ай бұрын
thank you! the mcx's kick are stronger than bcm or less?
@Airsoft_Chay5 ай бұрын
I would say the mcx has more of an instant aggressive kick due to the high fire rate. While the BCM kicks harder with a slower fire rate.
@davidem82155 ай бұрын
@@Airsoft_Chay thank you for sharing
@Airsoft_Chay5 ай бұрын
@@davidem8215 np, glad I can help!
@sylithics4 ай бұрын
No trades 😭
@Airsoft_Chay4 ай бұрын
🥲
@JaycobFactor3 ай бұрын
What fps does it shoot stock?
@k5r2974 ай бұрын
Wish it take GHK mags
@Airsoft_Chay4 ай бұрын
Just sell those and buy the better VFC Mags
@Jakelaw1155 ай бұрын
have you experience any leaks from vfc m4 mags? Cuz I had the vfc hk416d and got 3 416 mags 2 of them kept leaking after i replace the inject valve. So i had a very bad experience with vfc rifle mags😢
@Airsoft_Chay5 ай бұрын
None of my VFC M4 Stanag mags leaked, as they are probably the best gbb magazine in the market. The 416 magazines are not as good as the gray magazines, so I recommend you get those instead.
@NINJA_INVESTORS5 ай бұрын
What trigger is that
@Airsoft_Chay5 ай бұрын
What do you mean?
@NINJA_INVESTORS5 ай бұрын
@@Airsoft_Chay That trigger isn't stock
@NINJA_INVESTORS5 ай бұрын
@@Airsoft_ChayMy bad. Didn't see it was the airsoft version
@Airsoft_Chay5 ай бұрын
@@NINJA_INVESTORS the replica is all stock.
@Airsoft_Chay5 ай бұрын
@@NINJA_INVESTORS lol np
@pyroromancer5 ай бұрын
Afpg is a sketchy subsidiary of vfc. Failed/discontinued licensing products seem to be sold under that company
@Airsoft_Chay5 ай бұрын
I’m sure we all know that by now 😅
@HK-wq1ei5 ай бұрын
I would not say failed/discontinued because all the products sold under apfg were products that were intended for release before the license was lost.
@lofighost88115 ай бұрын
Gotta love the hate😂
@9tz7685 ай бұрын
@@Airsoft_Chay mommy bought it , who cares
@Airsoft_Chay5 ай бұрын
@@9tz768 try getting your mom to buy it for you.
@MusicColonyRecords4 ай бұрын
Hi. Would you know how to remove it's 3-prong stock flash hider? Is it as easy as turning it clockwise? Thank you!
@Airsoft_Chay4 ай бұрын
Yes, you just turn it clockwise like any other 14mm negative muzzle threads.