Mine is a Predator 212cc bicycle with a torque converter this bike has been fully broken in and tested and is built by a experienced mechanic, not a kids toy does 75 mph and has enough power to wheelie at high speed this bike will beat just about anything racing from 5mph to 55mph and is surely the fastest bicycle you might ever see. come check it out, if you think you can handle the power make an offer, (UPDATE) I made custom t-bars for it, extended the pedals and straight piped it, installed K&N air filter, jetted the carb, installed better tires, it sounds extremely nice, looks and rides a lot better now, just haven't updated the pictures yet. Update #2: extremely bright headlight brighter than most cars rechargeable, lasts all day very loud custom removable stereo system powered by rechargeable brand new 12 volt battery good for a few days of LOUD music before needing recharged and installed on board cigarette lighter for any 12v accessories racking a few miles on it but still good as brand new because I take good care of it still haven't updated the pictures mainly because I'm afraid someone will buy it if I do lol if it's meant to go it will go, the way I look at it I can build another one and have a couple hundred dollars
@ezl70525 жыл бұрын
LOLs, The Predator engines are torque machines! I wonder how well a Comet torque converter would hold up with a 36 tooth rear sprocket? I am thinking about a update on mine from the 49cc 4-stroke which runs good with the 36 tooth sprocket right now. The only problem with it is the T-Belt transmission and maintenance on it plus high 35 mph winds in the country.
@captaincrunch79445 жыл бұрын
That’s a harbor freight engine right? Yea I’m totally gonna do this looks like fun
@anthonypatel89205 жыл бұрын
Joseph Clements how much would you charge me for one?
@jessesevrens94785 жыл бұрын
Joseph Clements what state are you located in? Would like to commission a build from you using the same motor
@landennl165 жыл бұрын
If you build another one I'd like to buy one
@robertsmith53237 жыл бұрын
whoa!! fast!!!! wow!! now I would be worried about the quality of the base bike itself,....stuff like welds, rims, forks, and brakes. so much could go wrong so fast going 40 mph. when I do 30 on my Chinese 80cc I feel like I need to slow it back down before the fork welds break or the chain pops off. but wow, that thing is fast! (and heavy) the messed up part is that to move up to the next level base bike, the build cost goes from 3 or 4 hundred to 7 or 8 hundred. a lot of ppl say oh,.. ill buy another cheap bike when this one breaks,... there isn't going to be a tomorrow if it breaks at 40+mph. if there is,.. you wont be the same
@RinegnProductions7 жыл бұрын
robert smith lol the welds wont break hopefully
@JonLasaga4 жыл бұрын
I had a chain wrap around the rear wheel at 60mph and crashed im still around lol
@thakoalaking50224 жыл бұрын
Buy the engine from harbor freight and buy the transmission separately use the basic stuff from you original kit and swap the rear sprocket for a BBR sprocket that mounts to the hub itself that’s like $300 for the entire kit my bike hit 38 and was super sketchy then I upgraded the forks to heavier suspension forks which may get replaced soon and now it feels like a slow 125 😂😂😂
@thakoalaking50224 жыл бұрын
Engine is $119 at harbor freight and transmission was going for $89 on various sites
@MixedMedia333 жыл бұрын
@@thakoalaking5022 it doesn't have a transmission. It's only one speed that the engine turns
@anjodanoite37727 жыл бұрын
damn...serious torque on that thing ....almost knocked you off it at take off lol AWESOME !
@RinegnProductions7 жыл бұрын
Anjo Da Noite lol yep when i get another torque a verter plate i wanna put some wheelie wheels on it
@JediPolock7 жыл бұрын
3:07'wtf happened there?!! Looks like you wheelied onto your @$$ then somehow held onto it and continued riding:D epic $h!t man
@RinegnProductions7 жыл бұрын
Lol See what happen was My Annie turned the street I just came form and I didn't think she would notice me lol I thought she was just gone pass by but she waved and that took my focus off
@RinegnProductions7 жыл бұрын
I hit the gas down all the way lol it caught me off gaurd
@PSAPALI7 жыл бұрын
It's runs awesome. U might try adding 2 dampers on both sides of the handlebar for extra stability . It's wobbles alot
@sailingvesseldrifter17597 жыл бұрын
Love the running wheelie! So glad you didnt edit that out. I needed a good laugh. Sidenote: try to be safe i got hit by a car and now have a badly broken leg. I was only doing 15 to 20 on my 45mph capable bike. Its not that you have keep a close eye on yourself. Its everyone else on the road. I would love having enough torque to wheelie!
@RinegnProductions7 жыл бұрын
Sailing Vessel Drifter with Randi & Bob true we must watch everybody else
@RinegnProductions7 жыл бұрын
Sailing Vessel Drifter with Randi & Bob damn thats fucked up bro get well soon
@OliverMotorized6 жыл бұрын
Nice man, Looks torquey as hell!
@johnmccauley45334 жыл бұрын
You can pull some shit with that.
@williamsporing15002 жыл бұрын
That thing scoots! I really like the custom hat rack too!
@ImageAndArtNewYork3 жыл бұрын
I can get a ticket for driving 45 mph in NYC, awesome
@MrCbell573 жыл бұрын
Nice. Speeding, running stop signs, losing control, traveling down wrong side of road, reckless riding, etc... great video.
@brooklyngolden94642 жыл бұрын
Oh hi Karen! I was wondering when I was going to see your comment.
@zechb7566 жыл бұрын
I have the same kit. How did you align the drive sprocket to the back one on the wheel? Ive gone through 2 chains in 2 days. Also I hear a lot about the torque converter breaking in half. Did that happen to yours or is it still good?
@rogerlawrencewhite14753 жыл бұрын
47mph isn’t bad, just have to get it dialed in. One thing though is I thought the engine had to be broken in for the 1st 500 miles, not going over 30-35mph. If it’s broken in right it shouldn’t have probs hitting 55mph
@TacticalPhoenixYT Жыл бұрын
Pretty sure the break in doesnt limit RPM for 212cc 4 stroke predators. In fact, I broke in the engine on my gokart by full sending it for a minute straight
@brian-yx8hq Жыл бұрын
😂 10 hours of break in 😢
@foxman3625 жыл бұрын
I won phone farming contest for 100$ about week ago i bought my 80cc bike kit first time for 96$ on ebay i should be getting it soon i can use climb hills on the roads and bike lanes here in utah.
@ezl70525 жыл бұрын
Nice review I see that you must be using a coaster-brake on the bike? I've been running one on a 49cc 4-stroke and motorized bikes need a disc(s) brakes or even the friction brakes to be safe. I've had the bike chain derail on me several times and that means NO BRAKES! You have to be extremely careful running in traffic and towns. Thanks for the video review!
@RinegnProductions5 жыл бұрын
ezl thanks and no problem
@barnstorm100 Жыл бұрын
Thanks, good job showing the torque
@Gorillaboycot7 жыл бұрын
nice. sound like a diesel with automatic gearbox:) smooth ride. well done!
@RinegnProductions7 жыл бұрын
Lol damn and Appreciate man :) ... and someone told me it sounded like a lawnmower before I out the straight pipe on it
@topsecret18375 жыл бұрын
I’m curious if it would be possible to use an engine like this on a mountain bike equipped with a fully working front and rear suspension (which would address in part the issue of dealing with going 40+mph), 29 inch fat tires (for cross country and to buffer the high speed tolerances against the frame itself), having 3 different gearing sets to accommodate pedaling on said bicycle, a CVT for an electric motor, and gearing for a motorcycle. It would basically be a cross country vehicle that can be on the car and bicycle lane in different modes while having at least 3 different power trains to make it as reliable as possible. The cvt would be important for the electric motor because in a Porsche 918 they use an electric motor to compensate for the clutch operation with the engine’s transmission by applying more power directly to the wheels when the engine power train disconnects from the transmission to shift in order to make acceleration more smooth. On a bicycle that would raise eyebrows because using a typical chain would be impractical given most eBike use a single gear as torque and motor speed isn’t an issue. But with a cvt it would allow a motor to get a higher speed without shifting to a higher gear ratio. What I’m talking about with the triple transmission is that if you had a secondary shifter which could change the gearing system, you’d have 3 different transmissions for different purposes: For pedaling, Let’s say you run out of gas or just don’t want to use any power at all. In that case you’d be limited to cycling on the road and in limited off road conditions. Shifting to normal bicycle gearing would be important as a motor can produce more torque input to power the vehicle up roads without needing as low of a ratio as your two feet would otherwise need, hence 2 distinct gearing would be necessary. You would need the transmission and the fat tires because with thinner bicycle tires and a rigid fork for a suspension going as fast as you would on a motorbike at 50 mph or as fast as 80 mph would be massively impractical for a typical bicycle. So you would need a bicycle that can be as powerful and as big as possible to allow it to function as a motorbike while being light enough to be pedaled like a bicycle with dead weight (likely under 50kgs).
@RinegnProductions5 жыл бұрын
U can do it
@stormmccree82383 жыл бұрын
Would be too complicated for reliability. Better off with a simple rear friction drive if you want the ultimate reliability.
@ShelbyTenbears-ys4wsАй бұрын
Thats nice bike,i have a Cranbrook with a gx 200,and tork converter,32 t back sprocket,i can hit 50mph,+.
@bigshow44356 жыл бұрын
What a thrill... Awsome
@RinegnProductions6 жыл бұрын
thanks man
@motorbikemadness57736 жыл бұрын
Getting ready to put one of these on a Micargi Cyclone frame. Can't wait!
@jaypacks97527 жыл бұрын
hey man i have a similar bike but i am looking to go across country. what are you running motorwise and bike frame. I had to hodify the shit out of what i have to make it work and its great to put around town but i need something solid and you look like you might have it. I choped out a huge frame genesis 29" cruiser
@RinegnProductions7 жыл бұрын
Jay Packs join the Facebook group in the description so i cans see pics
@RinegnProductions7 жыл бұрын
Jay Packs and do u have the Death Row Kit
@jaypacks97527 жыл бұрын
message me men i really really really want to make it at least to west coast, ic i can i wll go back to the east. Im going to start a channel. I will post a video tomorrow or monday
@jaypacks97527 жыл бұрын
no i have the "80" cc kit from amazon
@wolfblack67592 жыл бұрын
Bike life brabrah!!!💯💪🏿✊🏿🔥
@chrishickman70597 жыл бұрын
almost tripple my 66cc but only 10 mph faster?
@RinegnProductions7 жыл бұрын
nxnxns ajxndk hmmm that's because the governor was in
@Daddychill9455 жыл бұрын
Well yours is a 2 stroke and if he changes his sprocket he can go 60
@mountainlaurel52645 жыл бұрын
can you pop a wheelie on yours?
@debonairecatalina65705 жыл бұрын
If he simply put a smaller rear sprocket on his bike, he'd cream your 66's ass
@WestleyBates5 жыл бұрын
Gearing
@myyama50877 жыл бұрын
Good job, man! Sounds much better than your first video. Were you having mechanical issues towards the end of the video?
@RinegnProductions7 жыл бұрын
Myron Yamashita yeppp throttle broke
@RinegnProductions7 жыл бұрын
Myron Yamashita and i will check it out
@jeredburson96003 жыл бұрын
I just bought one of this engines E bicycles are getting to pricey now and days but I’m not going to mess this up I’m going to take mine to my grandpa Burson house we are going to work together on it he knows more engines than I do I mess up so many times I know somethings that are basic but when it comes down to it I will get right good luck bro good job
@RinegnProductions3 жыл бұрын
Join Heavily Modified Motor Bikes Facebook group they will help u
@jeredburson96003 жыл бұрын
Thank you bro I check it out but I think I will go with grandpa Burson first his really smart dude when it comes to engines stuff
@codeman1765 жыл бұрын
my fav part of the video is starring at the ground the entire time
@jaredalexander34033 жыл бұрын
Me an my brother made two of them kinda like this but we didn't use a cvt clutch system we just ran a belt from the engine shaft to a drive pully hooked to the spokes an it does 42 mph but is doesn't have near the power at take off tho but they are fast once the belt grabs
@shawngoldsberry7473 жыл бұрын
Still running the governor. That's impressive.
@nickripley16046 жыл бұрын
Govenor was moving when. U got up to speed u can throw a zip tie on the linkage to keep the governor from going off n on
@RinegnProductions6 жыл бұрын
Nick ripley I eventually took the governor out ... then the torque a verter plate cracked in half 💀
@nickripley16046 жыл бұрын
Rinegn Productions there's a video here on you tube a guy shows that with the governor still on but adjusted the motor can review up to 5200 rpms if u did what he did u could do that but limit the motor to say 4500 rpm and still be on the safe side and hey awesome build by the way keep the dream alive
@RinegnProductions6 жыл бұрын
Nick ripley Will do and I wish I can get a Dyno one day to check the horse power and rpm on engines
@RinegnProductions6 жыл бұрын
Nick ripley a friend of mines just got one a test out The 66cc motor engines some of are as powerful as a 212cc
@nickripley16046 жыл бұрын
It's crazy what these little predators will do I'm happy with all of mine e
@kanaisolomon76425 жыл бұрын
I want to build my schwin chopper with this engine but I don’t want to cut out a part of the frame
@RinegnProductions5 жыл бұрын
Well theres no way your getting a 212 on that frame
@retrolovers95797 жыл бұрын
test run how far and fast is it?
@carlyandt67484 жыл бұрын
that bike would easily go about 60 with a gear change . about 8 to 10 teeth less on back sprocket and this thing will fly !!! wear leather , road rash becomes cancerous after a while ...
@djasewhole77344 жыл бұрын
Carl Yandt If he flies off that thing at 60, he’s more than dead. But the bike would probably break before then.
@carlyandt67484 жыл бұрын
dj asewhole I've ridden bicycles at speeds well over 70mph, Motorcycles in excess of 140 mph, and about 190 mph for the 60 Starliner, wear leather and sometimes a helmet, and I may have had more fun than any 3 men put together. Bless you and your family in accordance with the need in Jesus Holy name, Amen.
@djasewhole77344 жыл бұрын
@@carlyandt6748 Just saying you might need more than leather to stop your bones from shattering. How scary is a bicycle at 70mph??
@carlyandt67484 жыл бұрын
dj asewhole Keep in mind that world class racing bicycles are made to handle these speeds and also have super brakes, Also we did not have motors, as I have never owned or even rode a bicycle with a motor. I am older now and thinking of building one though. My experience with bicycles at these speeds is from Alpine descents , and yes I have plenty of road rash and an interesting collection of scars and bone breaks. A 70-80 descent feels like you are flying nearly silently just above the ground all you hear the sound of high pressure tires making an erie whine as they intermittently leave the ground sometimes for several seconds you hear nothing but the wind going over your back if your tuck is very tight (uncomfortable) the air around your face will be strangely calm. I hope this gives you some idea of what it's like, and Bless you and your family in accordance with the need in Jesus Holy and Healing name, Amen
@juansolo16174 жыл бұрын
@@djasewhole7734 Get some wider tires for extra stability and it'll be fine... a bicycle at 70mph is probably just as bad as a scooter at 70mph with the right tires. I've had a pocket bike up to 60mph.
@donchako39905 жыл бұрын
Is it weird I get a scary rush when the camera is facing straight down while he's doing 45mph+?lol
@RinegnProductions5 жыл бұрын
Donovan Hjersman lol 🤪
@RinegnProductions5 жыл бұрын
Donovan Hjersman gotta cut through that wind bro thats the only way to go 40-50 if your motor can produce the hp
@donchako39905 жыл бұрын
@@RinegnProductions I'm getting a 220cc 6.5 HP minibike with wide tires tomorrow. Any tips you learned with your similar bikes? Optimum tire size that sorta thing. Awesome video BTW a lot of people don't like targeted ads/content, but I wouldn't have seen this video otherwise I don't think. That's one pro I guess😅
@RinegnProductions5 жыл бұрын
Donovan Hjersman yep, true Nd I know most ppl do t like ads ... including myself lol but the revenue do help me out a lil bit also I dont have too many tips because those Mini Bikes Are basically built to last a very long time I know the exact kind your talking about but join the facebook group in the description and post pics of it tomorrow
@donchako39905 жыл бұрын
@@RinegnProductions just got it man its super sweet I'll post a video in the community tomorrow. (Its a purple bike BTW)
@MarkusKnowsHow6 жыл бұрын
I like that. I bet it will go that faster though. If you can make a video with the pedal to the metal. Thumbs up man that rocked. I would like to know what extra parts you had to get. I plan on making this build myself.
@RinegnProductions6 жыл бұрын
Yea heck yes ... that bike is slow compared to the Mini bikes ppl be building lol
@boulevarddacarguy99806 жыл бұрын
3:44 is the reason ppl hate us lol
@RinegnProductions6 жыл бұрын
Lol u see i was debating on passing him up right lol? But i didnt wont him to switch lanes on me ☠️
@marc92447 жыл бұрын
Probably make it cross the country on 5 bucks of gas! lol Nice ride! Good job.
@RinegnProductions7 жыл бұрын
Marc Brunet thanks bro lol and i wish $5 but 5 will last a couple of days
@bobbycratchet39585 жыл бұрын
First ride(For the engine)? What's the recommended break in?
@ryansilva10247 жыл бұрын
Why are we in a net.
@holyshit27095 жыл бұрын
We're in the matrix.
@dannyoutlaw80014 жыл бұрын
Lol I'm crying over here ...what happened at the take off Eric....lol that thing got away from you ...lol too funny... that thing got some power talking off lol....
@RinegnProductions4 жыл бұрын
Danny Outlaw lmao I forgot how powerful that thing was 😂
@dannyoutlaw80014 жыл бұрын
@@RinegnProductions lol ..it was too funny bro I was laughing so hard your voice lol was like wooooo...how did you like the power of the 212 compared to our 2strokes?? I know you are running the sthl cylinder now right? I've thought about doing one and I also want to do a 212
@Traivun210017 жыл бұрын
How did you build a predator motorized bicycle? Thinking about trying to build my own
@RinegnProductions7 жыл бұрын
Traivun21001 it was a kit
@RinegnProductions7 жыл бұрын
Traivun21001 link in description
@kxlucifer7 жыл бұрын
Traivun21001 you can go up to any engine and fit it to a bike aslong you know what youre doing..the. 212 are easy if you have proper space in the frame to accomodate the engine once you remove the factory gas tank you should fit it in many bikes range not all tho
@monkeyboy9910006 жыл бұрын
You need a cnc mount, cnc sprocket, cnc custom hubs, 10 guage spokes and even disc brakes.
@ronaldphelps20857 жыл бұрын
Very fast for a motor with that frame. Is it legal? What about getting it licensed as a custom bike. I have heard of that. I have seen home made bikes all the time.
@tyler75447 жыл бұрын
how did you mount the sprocket to the rear wheel?
@RinegnProductions7 жыл бұрын
D0nUT3ATer i used the standard 9 hole assembly Sprocket that comes with stock motorized kits
@michaelsiderio75924 жыл бұрын
This video made me buy one I reached 59 miles an hour
@jeffbezos47463 жыл бұрын
Was everything stock?
@billdunbar1973 жыл бұрын
I'm about to do a 4-stroke but I missed a 2-stroke thing I don't think I can do it. I'm going to build one anyway but there's nothing like a 2-stroke and that smell though
@christopherrivera70536 жыл бұрын
What did you do to prevent your self from getting burned and how did you mount it
@MarkusKnowsHow6 жыл бұрын
Did you have to do any welding to mount the engine
@rarebmx4me7 жыл бұрын
26in wheel i hit 70 go cart jackshaft with a 58t rear..
@RinegnProductions7 жыл бұрын
rarebmx4me damn with a 58t... what secret u do to the motor j/k lol
@RinegnProductions7 жыл бұрын
rarebmx4me and im gone check out ur rc vids when i get chance... just subscribing back to channel right now
@JakelaWeeze7 жыл бұрын
What's the rubber gloves for Does it vibrate that much ?
@RinegnProductions7 жыл бұрын
When I ride I use the rubber gloves to keep the heat inside and also to block the wind., because it was Winter/ still it The other gloves are for protection just incase if I were to fall lol
@JakelaWeeze7 жыл бұрын
Rinegn Productions ah gotcha I'm having a problem with too much vibration on my 2-stroke kit Trying to find ways to reduce lol
@RinegnProductions7 жыл бұрын
try putting rubber on places were the engine mounts like behind the engine and the front mount even the gas tank and chain tensioner so it can stay secure. You can use an old inner tube, just cut it up and make it look non noticeable.
@JakelaWeeze7 жыл бұрын
Rinegn Productions I'll give it a try thanks..
@MrPeterbilt19717 жыл бұрын
Looks like it gets up and goes. Gotta get me one.😍
@RinegnProductions7 жыл бұрын
Rick Pickell Yep, it do the only problem is the Torque a Verter its molded out of pot metal if you can find a Stainless steal Or Aluminum one then that will be good
@RinegnProductions7 жыл бұрын
Rick Pickell Im using the Death Row Kit
@sandmanbub7 жыл бұрын
Rinegn Productions, take your backing plate to a machine shop and have a machinist make a copy out of steel or aluminum plate. Those backing plates make or break the whole Torque converter aka constantly variable transmission and good luck, I enjoyed your video.
@Raven14086 жыл бұрын
Rinegn Productions torque converter lol
@debbieursuery99737 жыл бұрын
kick-ass job.
@RinegnProductions7 жыл бұрын
Debbie Ursuery thanks Debbie ... My momma name is Debbie lol ❤️💛💙💙💜
@RinegnProductions7 жыл бұрын
Debbie Ursuery lol and ik u might be on some one else channel but hey 👍 lol
@HoodChefTV17 жыл бұрын
Nice vid mane. outside of the engine, where can I find the rest of the kit that would fit the 212cc?
@scottpayne74767 жыл бұрын
Willie Cowyin eBay
@YorHighness5 жыл бұрын
Starting to appreciate 4 stroke bikes. No fucking trouble like the 2 strokes.
@seanbarnes90214 жыл бұрын
Was going to buy this kit researched it found this video. Found out today here in PA we are not allowed to have motorized bikes over 49cc. How stupid. The government is always ruining our fun.
@HOODHACKZ2476 жыл бұрын
Hey Family if u have time I really need to know how u mounted that. I have a cox chopper and a giant stiletto chopper I want to build on and can’t see it any other way but to mount a 212 pred on them. Any and all help would be greatly appreciate.
@craigbushby5156 жыл бұрын
What size bicycle? I just picked up a 26 inch huffy cranbrook.
@RinegnProductions6 жыл бұрын
26"inch Scwhinn
@louisjames26545 жыл бұрын
Now did you use a normal bike? Because it looks like it, just couldn’t 100% tell.
@RinegnProductions5 жыл бұрын
Custom made
@solorio8504able7 жыл бұрын
nice build bro .I had one hooked up but had to sell the city I live in made it illegal for it to be on the road . pricks
@RinegnProductions7 жыл бұрын
lol kmsl thats messed up, I'm sorry bro but I don't think I would of sold mines if I live in your city . Unless the same cop would pulled me over more than once
@RinegnProductions7 жыл бұрын
and Are you sure your city made them Illegal or did a police officer tell you, you can't ride them because they didn't know . . . some officers don't know they are street legal.
@solorio8504able7 жыл бұрын
Rinegn Productions no they made illegal I went to the city board to fight it but lost . if we got them plated and insured it was fine on the road but since the dmv said there is no vin number they would not plate them even though I said I don't need a vin since it is home made they still would not do it ..
@motorbikemadness57736 жыл бұрын
www.marcstevens.net Check out the successes page.
@colinhall876 жыл бұрын
This dude is gangster
@RinegnProductions6 жыл бұрын
C Hall im a wanster 🙃
@frnkguard16 жыл бұрын
Yeah it makes me wonder why they don’t just make those throttle grips out of metal instead of plastic pisses me off every time they break
@RinegnProductions6 жыл бұрын
frnkguard1 me too and they have metal ones also making your own kit out of high performance parts is better
@joeturovich13925 жыл бұрын
Needs governor removed and larger rear sprocket when running cvt. Mine tops out around 70mph
@adamajjoseph24654 жыл бұрын
thanks joe for educatin the wish weres mine too ...with tq converter maxes out at 70 but hey its front wheel ( whell) lol drive :) sleet snow and go for sho trying to hit 90 on it oh btw its belt drive so prob thinking its gotta be the fastest frnt wheel drive on the planet any sponsors ?
@adamajjoseph24654 жыл бұрын
havent gotten intto the motor yet but hd valve springs a must its a 6.5 briggs and i figured out a way to run the belt externalally so no tire removal to change it totally trick
I'm Nicolas and I'm looking for a job yep thanks bro
@NicolasT947 жыл бұрын
Nice one guys. I wish my Suzuki FA50 was that fast lmao
@reymonizaguirre64156 жыл бұрын
Bro you still build them ? I need one very soon
@terryaqualad67796 жыл бұрын
Sadly mines only get 35 mph till I upgrade her I have swinn point beach I added saddle bags an all they come in handy
@fatherguidosarduchi52043 жыл бұрын
Pretty cool. I can sell my truck now :O)
@TDOTKILLA097 жыл бұрын
I loved when I had a 4 stroke for these 3 simple reasons one higher top speeds with less vibration 2 the pull start so you can leave the engine idle and take th pedals off if you want 3 thge engin sounds better and makes half the noise a 2 sroke makes nice bike y foreal
@RinegnProductions7 жыл бұрын
K PAC I agree with all three of those reasons and also 4 strokes last longer and has last maintenance and thank you
@kxlucifer7 жыл бұрын
K PAC mine got a pull start and an eletrict start ..it very identical to the 212 in many ways share same after markets and parts.just the shrout is differ..
@scoffvonkiel68815 жыл бұрын
Glorious.
@tristanarmani6 жыл бұрын
Is that governed still?
@jsmythib2 жыл бұрын
Fast! Only 4 nickel sized brake pads tho! :) I gotta try this.
@paigelewis9756 жыл бұрын
What could I do to make my 80 80cc faster and what parts should I get
@workerslife74155 жыл бұрын
Paige Lewis racing carb with air filter would be a good start
@victorvance99877 жыл бұрын
good shit man! you should race a moped or go kart hahaha
@RinegnProductions7 жыл бұрын
Victor Vance I tried too but they all were scared 😂💀
@victorvance99877 жыл бұрын
Rinegn Productions try the detroit minibike races haha. anyways I gotta get me one of those. too cool but too bad for strict motor laws here in US
@RinegnProductions7 жыл бұрын
Victor Vance what a 212cc and the motor laws to strict for them in the US? Naa not really long as Motorized bikes are legal u can throw any engine on there well i would kmsl
@victorvance99877 жыл бұрын
Rinegn Productions thats good man you're an optimist. Ill take your word for it, ride or die hahaha
@AdventureWealthy6 жыл бұрын
Please someone help me out is this make manual shift or automatic. if manual can anyone link how to ride these?
@RinegnProductions6 жыл бұрын
Gregory Edwards they automatic
@AdventureWealthy6 жыл бұрын
Rinegn Productions nice wow so your setup with the 212cc gets Over 50 is auto? Do you have pedal brakes or handbrakes?
@lazc75107 жыл бұрын
I have an issue that when i brake the bike turns off. Do you know what im doing wrong?
@RinegnProductions7 жыл бұрын
Laz C on a 212 or a 2 stroke 66cc? And its because of an Air leak some where check your head and you carburetor
@MRG80917 жыл бұрын
Are you shifting gears at all?
@RinegnProductions7 жыл бұрын
MRG8091 ha lol No Sir, that is a 212cc 6.5hp Engine (that is used for go carts) on a bicycle with a Brlt Torque A verter making it have so much power ... thats all gas no gears
@murderlesson1017 жыл бұрын
Rinegn Productions i have a 319cc engine with 8hp i want to put on a bike, how fast would it be and what all do u need to attach it?
@kxlucifer7 жыл бұрын
Chris Fulton many things gokart mounts jackshaft torque convertor maybe 40 series..proper sprocket for the gear youll be using for engine to tranfers power to the rear wheel.of course a motorize bike gas tank so you can remove bulky tank of the engine and cramp it to the bike.but the mount am talking about will need welding to frame just like jackshaft..if you want to use torque convertor...if not use a gokart mount with build it in jackshaft and weld it on the frame..
@murderlesson1017 жыл бұрын
Imma just say real quick... its a briggs and stratton 8hp engine form the 80s. Can you tell me how fast it could be and link me to all i need theres mo gear shift.
@kxlucifer7 жыл бұрын
Chris Fulton. id assume anywhere from 30-50mph if gearings is on point...
@ontherightside26473 жыл бұрын
Do not do it, it is too dangerous, do not pass for the right side of the car, bicycles are not made for that kind of speed, nor their brakes, frame, wheels, suspension, seat. And if You didn't wear a helmet, You must use it.
@josephclossey73497 жыл бұрын
Getting mine tomorrow
@RinegnProductions7 жыл бұрын
Joseph Clossey dammit bro u gone have to upgrade that torque a verter to a Tab 2 because the piece of shit one it comes with will break on u eventually
@RinegnProductions7 жыл бұрын
Joseph Clossey look up torque a verter Tav 2 thats what u gone need for this kit also a heavy duty chain or either a tractor supply chain #41 and then upgrade your throttle to aluminum handles when u get a chance 👍
@ephesusrh47807 жыл бұрын
Damn youre passing cars
@RinegnProductions7 жыл бұрын
yes indeed and its faster I just didn't want to get hit by car that's why I either stay side by side or behind
@stelthcamo3575 жыл бұрын
Can you still peddle this bike or dose it take the peddle away
@sethfletcher37725 жыл бұрын
That looks like it was filmed in flatrock Michigan
@outlaw34406 жыл бұрын
How did you get it to go that fast with the governed still in?
@RinegnProductions6 жыл бұрын
Air to Gas Ratio... once you learn where the throttle response is suppose to be then u good
@victorconrad14315 жыл бұрын
@@RinegnProductions and all, pull full throttle and then barely barely barely pull down throttle
@somestranger85987 жыл бұрын
is it legal to drive on the road or do you need liscence
@RinegnProductions7 жыл бұрын
"lol its legal long as you are under 49cc where I live" but what officer would actually know the difference unless he is Bike Life kmsl and some officers who don't know that they legal thinks it is illegal to have a motorized bike at all :( . . . I just Ride Bro. :)
@RinegnProductions7 жыл бұрын
Kenny Noble 😂🤣😂 true, some people can't find them "loop holes" I feel sorry for the ones who actually care what the Law say
@RinegnProductions7 жыл бұрын
Its understandable if motorized bikes are not legal in the state u live in but some people try to obey the law and buy those high as 49cc because they are legal and the prices are higher because they are legal
@RinegnProductions7 жыл бұрын
Kenny Noble lol yea my bad on the wording I was talking about two different things lol and it sound like u a pretty good Mechanic
@jeremyknop53787 жыл бұрын
Your asking a guy who pretty much broke every law of the road and was dumb enough to film it and post it on youtube lol but honestly it depends on where your at, country/state ect in the U.S. most states it legal as long as you don't exceed a specified mph
@DynamicEmpireInc3 жыл бұрын
What frame is this and also what mods have you done to the motor
@larryhamrick22294 жыл бұрын
You can give that engine more throttle you just gotta mess with the carb and the springs
@davidrussell89183 жыл бұрын
Why is everyone so worried about break in on the motor. Its a lawnmower engine. When its on a mower you mow at full throttle right off the bat. Same with a chainsaw. The 66cc 2 stroke motors are the same thing.
@RinegnProductions3 жыл бұрын
Yea u right
@frogonpcp21466 жыл бұрын
What kind of bike is that?
@kingclose76467 жыл бұрын
that tourq thou i had a 212 on my bike fliped it and busted the carb
@RinegnProductions7 жыл бұрын
king close damn how that happen lol?
@desireytaylorchannel46396 жыл бұрын
What transmission your using
@RinegnProductions6 жыл бұрын
Desirey & Taylor Channel tav 2 which I dont recommend ... if you want the best of the best transmissions go to ghettobikes.com and order one
@desireytaylorchannel46396 жыл бұрын
@@RinegnProductions thank I'm building a bike 79cc predator for my little girl looking for something with a cover over the clutch
@khrisshultz25326 жыл бұрын
how did you mount the motor to the bike?
@RinegnProductions6 жыл бұрын
Khris Shultz the motor came with a bike kit which included a motor mount for the bike
@khrisshultz25326 жыл бұрын
Rinegn Productions fo you have a link?
@danielchristopher72644 жыл бұрын
i think i saw 45 on the phone spedomiter but whats the fastest it will go
@lilberrys4489 Жыл бұрын
Stock? Or upgrade the 212
@BuildBreakFix3 жыл бұрын
Lol to all 137 that gave this video a non like. You know your just jealous cause your bike now looks like a power wheel next to a corvette now lol nice work man!
@NOMADNEWSTV7 жыл бұрын
Man, that thing sounds fast. Mine is 66cc whats the top speed on yours?
@RinegnProductions7 жыл бұрын
VagabonDaze 52 mph stock
@NOMADNEWSTV7 жыл бұрын
Rinegn Productions nice!!
@Deltax15196 жыл бұрын
did you take out the governor?
@RinegnProductions6 жыл бұрын
Frank Mirabella no not at that time
@cosaceasar22726 жыл бұрын
VagabonDaze .
@LiveYourBestLife335 жыл бұрын
I need a good front head light where did you get your new one??
@Miklalo6 жыл бұрын
That 212cc is the truth how fast can it go?
@RinegnProductions6 жыл бұрын
Mik lalo only 50 bcuz the governor was still in it and also I’m gone get back in the game with it soon all i need is a transmission
@RinegnProductions6 жыл бұрын
Mik lalo I’m gone make one custom
@Miklalo6 жыл бұрын
Okay well it seems like it is a powerful motor
@RinegnProductions6 жыл бұрын
Mik lalo if i would of took the governor out and dropped the gear im sure it would of passed 50
@RinegnProductions6 жыл бұрын
I had a 44 t on it
@randomperson58315 жыл бұрын
What type of brakes are you using ? Do you mind giving me a link ?
@RinegnProductions5 жыл бұрын
Coaster brakes... do u need a link for that?
@randomperson58315 жыл бұрын
Rinegn Productions yes please
@rawkid3527 жыл бұрын
Can this go on a mountain bike?
@RinegnProductions7 жыл бұрын
rawkid352 yes, certain kinds it must have a wide space
@chinko41497 жыл бұрын
it can go on anything as long as it has a space to keep an engine
@josephclossey73497 жыл бұрын
rawkid352 yes
@runninggames7716 жыл бұрын
Just mount it over the rear tire.
@khrisshultz25326 жыл бұрын
is it still considered a bike and street legal?
@cdnbearb6 жыл бұрын
Khris Shultz no I recently asked a cop and he said since it has a gas motor it has to have insurance At least in Ontario Canada
@Whiskey_Zombie4 жыл бұрын
3:08 got that whiskey throttle
@eld84944 жыл бұрын
Bro @ 6:50 man!! Is this an affordable conversion, how much $ ?
@RinegnProductions4 жыл бұрын
The cheapest is $400, the best kit is like $600 and the dude sells them someone told me he has Corona, so I dont k ow if that's true or not
@Rononeil827 жыл бұрын
@ 3:08 he almost losses it
@RinegnProductions7 жыл бұрын
+Rononeil82 lol yep 🤦♂️ i forgot about that torque
@bertsbug7 жыл бұрын
Rononeil82 a lot of torque
@fredrickgabriel62296 жыл бұрын
Rononeil82
@barrytwnmoto40595 жыл бұрын
How hard or easy is it to install please
@lukeparaskevopoulos42063 жыл бұрын
Lol 😂 from that motor to that 80cc 2 stroke definitely difference involve Especially loudness 4 stroke is almost twice as quiet then a 2 stroke And 30-40 is pretty fast if I was him get some makeshift lights on the back and front and don’t take ur hands off those handlebars at all just move your thumb on ur left hand