How To Install 80cc 2-Stroke Bicycle Engine Kit FULL DVD 66cc 48cc 50cc

[@Yoyo-b3d]

Ive heard trash talk about bbr.. but clearly no other company is as clear and informative as y'all. Thank you

[@claybornlewis276]

I love the way you said your oil is as follows the oil mixture And then there was nothing there

[@ronmit-p5g]

he aligned the cut in the rubber right where the plates meet for the sprocket ....would not have done that but whatever

[@ronmit-p5g]

what the hell is he talking about forward peddling cranks lol what are you gonna do peddle sideways ???? he means the bottom bracket is set more forward on the frame

[@jamram7825]

Hacks to save time. 1.Instead of taking the clutch covers of the engine, engage the clutch with the hand clutch lever provided and place one end of the chain into the engines sprocket and rotate with your finger the under side of the engines sprocket so that the chain rotates outward and chain comes out the other end. 2. Hide the white wire off the CDI if you are not going to add any head lights to your bike. Coconnect the colors that match first and then connect wires that appear to be ground to the black one for example brown or green. then you guess right their is one wire left to connect I'll let you figure that one out. 3. Allow enough elasticity on your fuel filter by placing decent amount fuel line hose to avoid any stretching and disconnecting the line and having to replace the hoses and spilling fuel. 4. If your engine is new it will take some time to start make sure to open the fuel line and to open the carburetor. Gas tank opens to the right and carburator opens downward on the lever.

[@thedailydude2]

fuel or oil?

[@MasonS-h4n]

@@thedailydude2 gas, 92 octane

[@marilynmanning2887]

Ñ

[@jamram7825]

@@thedailydude2 I no longer suggest doing this to avoid confusion and damage to you engine I'll remove that part

[@AceThePeasant]

A mechanic told me that if I'm not confident that i can finish the project, i can do all the parts that dont remove the chain from the bike and do the engine and bike part last. Would that be smart or just take on the project in a day

[@CycoMoe]

Tip: at 11:21 when he says to remove the flower nut you have to hold the clutch pedal in while pushing down on the cover to free up the flower nut, I was stuck with that problem for a couple of days until I watched another video on clutch troubleshooting so I thought I should share my experience

[@vinniecasella3849]

why do u need to take that off anyways can i just skip this step

[@dominichebert9884]

@@vinniecasella3849 No because it will stop the gear that the chain is attached too from spining freely and you won't be able to attach the chain

[@dylanfrancisco9550]

@@dominichebert9884no.. use the socket on the nut for the sproket that comes with the kit to spin the chain on just make use clutch lever is locked in

[@dylanfrancisco9550]

dude are you still alive.. cant believe someone that doesnt know the difference between a pedal and a lever is trying to build a gas bike lmao

[@ronmit-p5g]

fuel on off switch/ fuel valve is called a petcock

[@sandeepsompalle7821]

This is the only video on youtube which gave me dimention requirements to fit a engine on a bicycle. Appreciate your great work :-)

[@The_Sojaks]

I just installed my pexmor moter I couldn’t have done it without you! Thanks so much.

[@xanderestrada5584]

Just ordered mine wish me luck 😅

[@AutumnTg]

This was by far the most helpful video I found yet it’s simple fully explained and pretty professional delivery with instructions Thankyou 😊

[@paramandans]

I made the mistake of listening to people and watching videos about building a bike. They said never use rubber motor mounts. Big mistake as I had nothing but problems the whole time. Finally mounted it with them and it made all the difference in the world. Always always use rubber when mounting a 2 stroke.

[@cowloverman27]

I will be getting a motor sometime in the future for my bike, and I saved this video for that time. Very simple to follow, steady camera, and not rushing.

[@humaliba5426]

Hey , ever get the bike :)

[@furkii334]

@@humaliba5426 i think he didnt

[@skazzy021]

with my dad i got bought parts that we needed and thanks to video i made my bicycle with enginge thanks alot man!!!here is like+subscride

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@thewaffle3945]

9 years is he brave to answer if it works?

[@teamnumbskull2846]

It's always good to take some old bike tire tube that's cut into strips and wrap them around where the tube of the bike where the engine touches the frame between the engine and the tube on front and back, it helps reduce vibration a fair bit and shake and it keeps the engine from digging into the metal of your bike tubing

[@volatile2805]

Im gonna be the first person not Meth'd up riding around on one of these in my town. Hope no one gets the wrong idea and that is why I built mine as clean and proper as possible, so my bike dont look like all those folks with severe personal problems.

[@18jonathan91]

i appreciate this video. i just bought myself a zeda 80 firestorm kit, and it looks like after a couple watches, I should be able to do this without a problem. I love how in-depth it is, and how nicely the video is set up. thank you again for the help, cant wait to start riding

[@robertstrohlin6051]

Its not in depth though!? Johnny barely showed anything about what he did there with the magneto loop! Wtf man???!

[@thirdeyesurvivor3886]

I just got the same kit, I’m installing it on a schwinn OC Chopper

[@bernieolivera5632]

Compared to the instruction manual that came with my kit. This video is great. Thanks you saved me a lot of heartache and confusion. Here is a tip: When in installing the sprocket I measured the distance from the threaded shaft to the end of the teeth at 180 degrees segments. When measurements equal, this insures that the sprocket is centered.

[@vincent10717]

You got an instruction manual?

[@meomeo-ue7qd]

Yeah but see I got this fuel filter...

[@meomeo-ue7qd]

@@vincent10717 yeah what the f*** are one of those

[@Grady_OBS]

For those wondering, here are the fuel ratios (I think) Break in: 18:1(6oz oil per Gal) After Breakin : 24:1(5-6 oz Oil per Gal)

[@wingerrrrrrrrr]

18:1 should be 7.1 oz oil to a gallon. 24:1 would be 5.3 oz. Too much oil leans out the fuel mixture since it's getting less gas and will run hotter, so more isn't better.

[@arablakba6988]

@@wingerrrrrrrrr so don’t fully full up the petrol tank

[@uhtehz2362]

Its 8oz. For break in period then after that 5-6oz

[@KClO3]

Use 1:40 right from the start or the rings will never seat

[@morrisjohnsonakamj6346]

@@wingerrrrrrrrr less gas = less heat not more heat! more oil less wear

[@austindovel2139]

the fuel ratio is as follows........... and thats it. what wheres the ratio?

[@DuBstep115]

+Austin Dovel I would use 1dl to 5L making it 2%

[@codyhastings8902]

I actually bothered to do the math and the calculator says the instructions translate to 3.125% oil per volume, I usually add 4 oz. of oil to a gallon of gas (conveniently measured by a mason jar :p )

[@lilgee5894]

32:1

[@abdirahmanmahdi626]

Yeah

[@Daddychill945]

@@codyhastings8902 can you teach me how to do the ignition

[@jodysowder6780]

I bought the 100cc anbull kit...the kit was missing about everything ...so in luck I had most of everything I needed from my old kit...well this video has helped me in putting together my bike with the parts left over

[@brisay1844]

This was the most excellent , thorough, and helpful "how to" video that I have watched. Amazing job, you guys. I wonder if it would be possible for you all to make a video that explains how to install the brakes. Getting it to go is one thing, but there is a real problem if I can't stop it. Thank you guys so much.

[@JalapenoSmoothie]

Fantasic video! I’m a 56 year old woman and am positive I can do this! Being mechanically inclined as I am. Thanks for such a great job ❤️ Just got my kit yesterday. Lets gooooo!!!!

[@illkid86]

I'd love to take u out on a date

[@Bull3tBikes]

You’re too old and frail to handle that braaap

[@C.D.J.Burton]

I couldn't help but notice this in reccomended videos, makes me want to get one now even though I have a 125 already! Really good tutorial, one of the best well explained tutorials to date!

[@gamerush7117]

Thanks bro all I needed was a bottle in the back wheel

[@TheJokersFather]

...funny how I had to figure all this stuff out for myself(especially the carburetor assembly) and my build with gas tank Kreem coating took 3 days NOT 2 - 3 hours, like it says on-site, lol. My build was on a Schwinn Errand and it was perfect, not a thing wrong with it. I got speeds of up to 41 mph, until I burnt the brushes out.

[@wingerrrrrrrrr]

What brushes are involved with the two stroke motor? Did you mean you burned out the clutch?

[@nathanwest4670]

I'm actually going to be buying a bike next month that a local here built in Canada Way Down East. And I'm pretty sure the whole shebang came from you. At least the motor and whatnot definitely did. So believe me when I say this, you have Canadian customers. Already have one that I'm working on a building and whatnot but I think it's still a good idea to have the backup. And I tend to trust it where a good chunk of it was built by you bikeberry then the rest of it was put together by a very experienced person. I'm good with the motors as I'm a certified small engine mechanic. However I'm still learning the rest of it which is all very much important. Like making sure your sprocket gets mounted correctly and true so the chain is within its parameters, things like that. And that's where your videos help a lot as well. Therefore I do trust anything that comes from you

[@myfavoritemartian1]

We were limited to 49cc with out getting a license. So I bought an 80cc engine and stamped it 49cc. So long as I never got caught going over 20 mph I was OK. My bike did a scary 29 mph.

[@wrjazziel]

Thank you so much man for putting a lot of effort into this video and instructions, super useful!

[@kiwinade2455]

best tutorial on youtube hands down for these builds

[@iv0hh]

Thanks man i'm almost sure i'm getting one and installing it myself now after watching this.

[@sonumwgdjvdj1624]

01309959995

[@Strickn9ne747]

So I've went into the rabbit hole. Ordered the stage 4, got it.. inspected it and assembled. Now just waiting on my Nel Lusso to arrive. This is gonna be too fun

[@senecan100]

Of all the videos and info I've looked up considering these engines this is by far the absolute best there is. My bike is nothing like these new easier models lol. It's a fat butt Shwinn Stingray and I still got it mounted within an hour of watching this. Tho the electric wiring part could be a tad better in explanation as not all the engines come with those colors and it's rather easy for newbies to cross wires. Other than that absolutely awesome job on this 👍

[@mahbeone]

u did such a good job with this video I think even an OLD Woman (like me : ) can fix my 2 stroke bike now! Thanks 4 taking the time 2 do this & posting it on-line!

[@tylerhughes192]

Thanks for the video got my bike built in one day

[@mrpotatoman5678]

I wanna do this does it still work

[@gameattack1989]

@@mrpotatoman5678 Yes

[@mrpotatoman5678]

@@gameattack1989 k

[@davidcrunkmd]

Great video thanks! I'm just wondering if something was left out during the editing of the end of vid. The fuel mix ratio wasnt shown or described in any detail.

[@oxfordutd83]

Keep it flat bro....

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@Mark-vd8oi]

GOD BLESS YOU..BEEN TRYING TO BUILD ONE OF THESE.IM WAITING ON A NEW KIT.. I REALY NEED IT TO WORK N FUNKION

[@bernieolivera5632]

I agree with the comment about the tools used in this video but on the other hand compared to other videos I've seen this one is comprehensive and easy to understand. As I said in my last post this video saved me a lot of heartache. As far as the electrical there it's that much to it without getting into a technical explanation of how it all works. I personally just wanted to install the kit and get it running. So I would give this video an A minus which is still very good. Additionally FYI there is a lot of info on the internet on these motorized kits so spend some time and do some research before you get started.

[@00Anthonyhughes00]

This is a very useful video i actually enjoyed this instructional video

[@bikeberrycom6539]

Anthony Hughes, Thanks!

[@timstewart567]

I built one in January 2020. I have probably ridden 200-300 miles since. I ran 16;1 fuel for 2-3 tank-fulls and then moved to 20:1. The engine likes the 20:1 mix and it doesn't smoke at all. It's important to check tightness of everything frequently. Head bolts need a little tweek every few rides.

[@Dragnmastralex]

why not use thread tape or thread lock? you can even use double nuts to prevent loosening. and if your really brave use some JB weld behind the nuts on the thread after you tighten them for a permanent solution. Loctite 271 was made just for this.

[@Davids_Life345]

How u make that 20:1 shi boiiii I need to know

[@frostedlambs]

​@@Dragnmastralexthat's correct

[@xnightxdreamerx]

I found this video to be perfectly instructional as well as helpful. Thanks for taking the time to create and post it :)

[@christophertran6283]

I recently bought an 80cc motor from you guys. Did everything the way you guys did it. Starting up the motor jolts while it idles and when you gas it, it's at the same speed as it idles, but no jolts. I see the reviews on Amazon and the description. Some people said they weigh 200 and they are going 40mph. I weigh 140 and I'm going at a walking speed 😑.

[@bikeberry]

Give us a call at [phone] and one of our specialist will be happy to help you with this issue.

[@slipknotfan2217]

sounds like a badly tuned carb

[@colewilliams3437]

Adjust the idle screw. It sounds like the screw is not set right or the throttle may have not been assembled right. Triple check the throttle in the carb.

[@Rapcom1]

I bought one of these motors for my mountain bike and find it fascinating that the parts that they now send out for different compared to what I had received back in the day. I guess they're trying to improve the motors functionality.

[@jessegivens8331]

at 20:00, you said the fuel ratio is as follows, but said and showed nothing? What's the ratio?

[@bernieolivera5632]

There seem to be various comments on the ratios. I have been reading the ratio should be 16:1 (8oz to 1 gal) and 20:1 or 24:1 for normal riding.

[@bryanmurphy1614]

3 oz of oil per gallon

[@xturbohd4466]

vilhis Its 16:1 in break in (16 L gas to 1L Oil) and 20:1 after break in (20L gas to 1L Oil).

[@paulkogioumtzis4386]

xTurboHD how do you put all that in a 1.5 or 2.5 litre tank sorry I'm a noob at this

[@ashmuratti8293]

i think its every 16 L gas its then 1 L oil

[@Katfellow]

I'm thinking about getting a motor bicycle setup for in-town travel. This is a helpful video.

[@bikeberry]

***** We love using our motorized bikes to get around the city as well!

[@cadenswain158]

BikeBerrycom i think mine is missing the coil and a couple other things and the spokes are in the way of the bolts

[@JoeHYu92]

This is by far the best video on how to build on of these things.

[@silverstacker177]

Gotta love the cracked motor mount to the frame at 6:35 - 7:25

[@Brian-uj6gm]

Mine came in today and I'm so excited. I'll update you when I put it together and tell you how it goes

[@frostyflake1128.]

How did it go?

[@kurtkelling1016]

My kit came in yesterday and I'm missing g alot of parts that the video shows it comes with... hope you had better luck.

[@professorpatpending8731]

Around 110 years ago or so the motorcycle morphed out of the pedal bicycle fitted with an engine of one or two cylinders. The engines used were usually four stroke.

[@meomeo-ue7qd]

That's pretty cool history fact

[@theone2be33]

#1 DON'T use a Zip tie for the Chain guard! It'll break off! Use a small hose clamp. #2 Use BLUE LOCKTITE on ALL NUTS AND BOLTS!!! Your Welcome

[@savagesock3598]

theone2be33 thank god, he should pin it so nobody gets hurt

[@quintenkamphuis]

You're welcome** You are welcome ;P

[@quintenkamphuis]

Also you could just use a better zip-tie.

[@guybodmanable]

Someone please get these kids a set of wrenches for Christmas! And also have santa show them how to cut and use zip ties.

[@TheGabbaWabba]

guy bodman ok boomer at least he’s working with his hands and learning

[@embracethestruggleitsreal8221]

These kids did a good job stop hating

[@keithduffield5239]

Cant agree more. It's a "how to Video". Pliers on a nut or bolt are not a good "how to",

[@joshuabacharach8124]

I'm currently mounting a similar engine on my 1970s cruiser bike and oh boy has it been a challenge but I think I'm almost done all that's left to do is the electrical and clutch

[@anthonybuddini2828]

Superlike, explained so well. Very informative video

[@stowjer]

Great video. Very good instructions!

[@NinjaViking1]

is it just me? or are the Handle bars "up-side down"?

[@ludditeneaderthal]

NinjaViking1 yes, but if you look at pics of traditional "board track racer" bikes of a century ago, the flipped bars were "how they rode 'em". On a beach cruiser frame it gives that vintage look, especially if you wear a backward "duckbill" Tweed hat (or kangol), and round lens or "red Baron" goggles. Those puffy thigh riding pants too, lol. Style points count you know!

[@mitchellbrowning2666]

It’s just you

[@MattsRanger]

Tucking down helps weight distribution & with wind. This is a good compromise vs drops. Kudos to these guys.

[@davebeck8973]

Cables are not long enough Had to do something. Also it will be nice when that wire tie breaks at the chain guard and it gets jammed up. Your asking for a crash!

[@scottmckinney4291]

Lastly, prepare for spokes to be taken out because the cheap ass China made chain twisted.

[@KSpooners]

Ca you upload a vid of how you do this on a Mountain bike or can you try and explain to me of how it is done

[@arjunyeleshwarapu]

KSpooners it’s similar but you won’t be able to change gears. if you keep your derailleur, but remove the cable it’ll work

[@jacobbutler7942]

@@arjunyeleshwarapu why cant you change gears. Mount the shifter behind the throttle, it has a set screw

[@arjunyeleshwarapu]

Jacob Butler yeah that could work... ive kind of stopped using my bike cause of the chain constantly falling off bc its never aligned, and also gas leaks a ton with these things

[@brianmccann666]

Exactly the same as this one.

[@brianmccann666]

@@arjunyeleshwarapu ... Leaking from where ? Fuel Line ? Heat up the line before putting it on either end. Once it cools it shrinks tight. Pepcock leaking ? Tighten it. Still leaking ? Gastank posts ? You over tightened the gastank posts to the frame...

[@meniogtz]

Thanks to this video I was able to fix the wiring on a bike that i just bought with brand new engine . Wiring wasn’t done right.

[@glenngray6895]

For example, the rear sprocket 44 tooth has burrs on one side. These should be filed clean before the installation ! That could take up to an hour by itself. I did this with a small round file. It will save your chain from exploding, and yes it has happened to me

[@colemichael7409]

Just got one of these and mine came with the sprocket tool as well as the front mount piece you just put on your engine. So far pretty straight forward

[@FAMBAM_REVIEWS]

best tutorial out there.... had I watch this the first time I would not be going back as I am now to correct things :) thanks for taking the time to make this vid!

[@backa5750]

NFORSA you need to put the clutch in ride the bike and let go of the clutch the engine will start use the clutch

[@Camz316]

Why am I the only person who wants to know how fast this thing goes?

[@J_Jim-mo3ub]

Around 25-30mph

[@darrylkinslow5613]

@@J_Jim-mo3ub That's wrong. A 66 cc (80/100 cc don't really exist for bicycles) can go up to 80kph or 110mph if tuned right and built right, out of the box it can go 50kph 80mph or faster.

[@Dartoras]

@@darrylkinslow5613 One mph equals exactly 1.609344 kilometers per hour (km/h). refresh you numbers..

[@darrylkinslow5613]

@@Dartoras Sorry I reversed it,Yeah, I wasn't going for exact, I was guessing. And one thing I do know for sure is that 50mph on the speedometer is about 80kph, so I' m not so far off. But I did mean kph when I said how fast the motor is. I remember catching a ride with U.S. citizens in Canada, they didn't know what kph was, so they were driving at around 110kph, lucky they didn't get stopped. But we got far, pretty fast.

[@Dartoras]

​@@darrylkinslow5613 I did not want to offend you, I live in the EU and with so much content in the US on the Internet, when I saw it, I thought it was just miss written

[@GamingMaster-us7ty]

BEST VIDEO INSTALLATION GUIDE. WELL DONE THANKS AND MORE POWER TO YOU ALL

[@neardood1]

When I put my sprocket on the spokes I did it by taking the rear wheel off the bike, fitting the sprocket, plates, bolts, rubber ect loosely then refitting the wheel to the bike to do the alignment.I find if you attach something to the bike's rear frame near the sprocket (ideally a DTI gauge but lol I held the hammer against the frame) and rest it on the big sprocket so its just touching, then turning the wheel it will let you see how much the sprocket is out by and let you adjust it in both up and down and left and right directions until you have it done up right. The manual with mine said the tolerance is 1.5mm (but not in which direction?) which was easy enough to achieve.

[@adrianolehmanlmt]

great video! am starting my build today and this helped so much

[@walkerfharris]

did you finish it ever? how is the bike doing?

[@adrianolehmanlmt]

@@walkerfharris built 4 since then with a 5th ready to be built. i using an rat bike with oversized frame and tires. just trying to figure out how to mount the engine

[@adrianolehmanlmt]

i think i am ready to do some commercial builds for resale. also bikeberry.com is a great source of parts and kits if you have not already checked them out

[@ARSZLB]

Is this supposed to be some kind of joke…? Everyone knows that there isn’t a single person on earth who knows where their 10 mm socket is

[@ih8hertz1]

This post literally sent a shiver down my spine.....its always a 10

[@jimlahey4219]

I always know where my shit is

[@ohioemeregncyresponsevehic3381]

We went through 10, TEN sockets.

[@DBCoop-bz4sl]

It's almost like they're disposable. One use.

[@robertstrohlin6051]

Actually. I do. And I Horde those Shits Like Fuckin Diamonds. I have one simple rule. I don't lend out my tools... Period. Plus. I don't have kids... Soooo that's saving me a lot of heart ache...

[@HardDiskLover]

This is Great. Very well explained. But I must say the Part about the electronics was a little to fast. I just got myself a racing bike in pretty bad shape. I will restore it and add a motor to it :-)

[@Biminifisher]

Great video! I have a white wire coming from motor. 50/50 chance of getting right. Does it go to blue or black? Thanks

[@Omniticus]

Thanks man I am not tool savey and this helped me understand my bike I was wondering what the little plastic part between the mortar and the exhaust was called

[@MikeXwolf]

Hi guys! Thank you, this is a great tutorial. It explains a great deal. I got a kit sold to me without the rubber spacers or the universal mounts and it just won't fit. Where can I get those so I can proceed with the build? Do you sell them separately? Thanks!!!!

[@eracing9481]

amazon

[@troytedesco2728]

Thank you so much! This is really helpful. It is a very well organized video! 🙏👍.

[@wyzzardfamily]

Awesome video. Made my installation an absolute breeze. Question: can these engines go out of timing? I did a test run, chain tensioner came loose, locked up chain. I fixed it and now don't have any spark... Thanks for any help yall

[@gustavosmith3980]

Might have damaged whatever part transfers the mechanical energy of the chain to the magnetic electric device.

[@CycoMoe]

I recommend adding 8 oz of oil for every 1 gallon of gas for the break in period(16:1)

[@newq]

I will probably (?) never build one of these bikes (though I have the perfect old bike I'd do it to), but nevertheless, I thoroughly enjoyed watching this video for some reason. Really interesting.

[@s.s.s4526]

I am watching in 2024

[@MechanicalKidAlways-repairs]

Same here might get one

[@gursharansingh6450]

Legends watching after 9year old😂😅

[@OlegAverin-nz2fe]

Guess what. Watching in 2024

[@jansommer3250]

I was the 26000 subscriber! =D

[@caseyjones8246]

Is there any kit for a 20 inch bmx bike?

[@gameattack1989]

What do you do for the electrical portion of your kill switch if it doesn't have any male ends to it, just open exposed wire?

[@MattmanCDN]

Cool vid guys!!

[@rentatrip1videos]

Man oh Man , I really noticed this guys voice has that distinctive East LA Chicano accent , makes me home sick ... you probably did not even notice but it is a Hispanic Los Angeles Dude talking ! ... video was made in a suburb of Los Angeles !!!

[@MattmanCDN]

Check out his other vids you will see and hear him

[@rentatrip1videos]

it is a very well made video ...I like the back ground music , cool marimba jazz lay back sounds ...LOL

[@bikeberrycom6539]

Matthew Schurter , thanks!

[@bikeberrycom6539]

rentatrip1 really appreciate it, man. Thanks for the kind words!

[@taje718]

Can you make a list of the tools needed?

[@buzzclark]

Hi. I'm a paraplegic and use a wheelchair. I would love to do a build like this but I would have to start with something LOWER with THREE WHEELS. Kind of like a trike. Have you ever heard of this being done ??? and what are the chances of my success with this project ??? I'd greatly appreciate your info and advice if you are able to give it. Thank You. Sincerely, JAMES.

[@JUST-UK-JAY]

5 years and still waiting huh ? Damn i just subscribed too

[@wyattcarey5166]

Yes I have one but for a trike build I would recommend a 49cc 4 stroke engine if you want to ride in residential areas because near me they hate all my dirt bikes three wheelers and motorcycles etc.

[@wyattcarey5166]

Buzz Clark the 49cc 4 stroke kit has a pull start so you won’t have to pedal to start the engine

[@wyattcarey5166]

Curtis check my new comment

[@maxkenee5457]

you will need an electric front hub motor to kick it over

[@DavidLacombe86]

DONT FORGET to engage the clutch to get the flower nut to be removed by hand

[@onebaddj]

What about the white wire? Comes oit of the engine block next to blue and black for spark. No mention anywhere for it in any instructions. Thank you and great video.

[@caedenkelso7803]

What is the fuel ratio? It doesn't say...

[@nathanael5606]

Most agree around 35:1

[@whnzr7047]

Some people also say 40:1 but do what you think is best.

[@TanBoiIndustries]

32:1

[@tasosdiamantis]

most helpful info on the net really helped me thanks a lot

[@backyardrestorations]

I bought your stage 4 and I hate that sticker “this is made for racing” I tore that off and bought a 49cc sticker

[@RainytheNB]

That's to get around emissions laws, by classifying it as a racing part rather than a road vehicle part.

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@WrathofRS]

So besides the kit, what tools do you need to complete this? Just a 10mm wrench, and needle nose pliers?

[@taylorgirten6229]

Love how it says here's the fuel ratio...then doesn't show it...otherwise super helpful. Got it bust out in a weekend. And that's while my 1yo daughter was "helping"

[@RovanRCTube]

I wish someone would design a brake caliper that would work with the chain drive sprocket.

[@gutterfingers]

Energy Nut grow up and do it yourself

[@usdm_demio]

I wiegh 315 I'm a big guy do you think this motor would pull me along bad?

[@jubletyre1386]

You will be fine I'm 260 and I've road a weaker engine at it its top speed

[@grahamlopez6202]

You'll be okay, but you'll look silly as hell

[@bobsacar3836]

Are these legal to ride when you're under 16?

[@bikeberry]

bob sacar They are legal!

[@schreckt]

Varies by state in USA over here in GA we need a learners permit at least be 16 and wear a helmet.

[@newtonsbuilds8831]

+BikeBerrycom in uk?

[@bobsacar3836]

in canada

[@ThereIsNoMatch]

+joshua wagner no. In GA we need to be 15, have a learner's permit, and wear a helmet.

[@Ieatcrumbs]

His tutorial works. was wondering why my gas bike it wasn't working... Was wondering why The idler was so painful to install... Destroyed an entire wheel but fixed it... Did you know that you can get these things to work for 15 seconds with the idler on backwards? Well I do now.

[@campbellpaul]

Very good! Harbor Freight has some seamers that are well made but inexpensive. They make quick work of bending pliable brackets. Do you sell the link removal tool?

[@dannyboy8108]

got the engine waiting on a bike lol

[@desireytaylorchannel4639]

Danny Boy kzbin.info/www/bejne/bHWZoYKVj7mne6c

[@trudagger3933]

Other way around right here😂

[@ladinate9091]

0:30 hahahaha I’m doing it on a bmx

[@arablakba6988]

Did it work

[@ladinate9091]

​@@arablakba6988 yeah for 2-3 months then i rode it basically everyday i was adjusting the spark plug and snapped off the hook saving for a new plug and a pull start because the wheel size is 20 inches it has to be rolling down a hill to start

[@pubz2288]

“Fuel ratio is as follows: Says and shows nothing “

[@Aerialvids1]

lmao exactly

[@OlegAverin-nz2fe]

Ok so if watched a lot. First 2 gas tanks are 1:16 (example: 100ml oil, 1.6L Gas Permium. After those 2 tanks you can go 1:24 or 1:26. (Some even do 1:40 but idk about that)

[@OlegAverin-nz2fe]

Hope that helps :)

[@OlegAverin-nz2fe]

I hope I will help. First 2 tanks get 1 : 16 ration (100ML Oil and 1600ML Premium Gas. After those 2 tanks use 1 : 24 or 1 : 26 (your choice)

[@pubz2288]

@@OlegAverin-nz2fe dawg i posted that 2 years ago

[@jhewitt8143]

another tip for "breaking in" your new 2 stroke bikes... first, increase the oil to fuel mix by 10% of the ratio recommend by your engine's manufacturer, then follow these instructions... start your bike and allow to run at idle for 10 minutes, shut down and let cool for 30+ minutes, repeat this 4-5 more times. start your bike, ride for 10 minutes @ 50% power, shut down and let cool for 30+ minutes, start your bike, ride for 10 minutes @ 60%-70% power, shut down and let cool for 30+ minutes start your bike, ride for 10 minutes @ 80%-90% power, shut down and let cool for 30+ minutes empty your fuel tank, then make a new fuel/oil mix at the engine's recommended ratio start your bike and go all out (no more than 30mph) for 20 minutes, back it off to 50%-70% for 10 minutes and let cool for 30 minutes ¥ if you intend on storing your bike for 60 days or more, remove the fuel from your tank, do NOT run it out of gas, fill your tank half way with high grade premium fuel, add a fuel stabilizer, but do NOT add oil to the fuel/stabilizer mix when you got to get your bike out of storage, fill the rest of the tank with high grade premium fuel and add the requisite amount of oil to the mix, run your motor @ idle for 10 minutes, shut down for 30+ minutes, then enjoy this along with reasonable maintenance about every 20-30 hours of operation and reasonable riding habits will give your bike a long life and many hours of operation and enjoyment

[@Krod5484]

I would also put thread locker on the exhaust manifold and anything with a gasket so the head gasket bolts and the carburetor intake. Had experience with these booth coming loose and the exhaust falling off! With thread locker no problem at all

[@roybear9052]

Love how the chain went from silver to black back to silver 😂😂😂

[@edgeofforever7720]

It's the evidence of magical editing. Usually my videos aren't as clean as that.

[@chinomatra4680]

Your video was very helpful to me to finish my application on my bike am very pleased with it. Thank you much appreciate.

[@brandonmcnew9307]

It helps a lot to see how some stuff gets done so you know how to do it thank you I'm trying to get in to it I am a new at all of this

[@larryshaver3568]

a u bolt from an antenna mount kit will probably work

[@turboroscoemaguedavedicker7281]

Subscriber # 39,264 looking forward to seeing y’all again

[@workgotcha9063]

Excellent stuff, I don't care what they say... especially with the carburator.